1. Sarrera
This instruction manual provides comprehensive guidance for the safe and correct installation of the Connects2 CT20VX04 Harness Adapter. This adapter is designed to facilitate the installation of an aftermarket car stereo into specific Vauxhall vehicles, ensuring proper power, speaker, and antenna connections, including phantom power for the original Fakra antenna system.
2. Segurtasun informazioa
- Always disconnect the vehicle's negative battery terminal before beginning any electrical installation to prevent short circuits and electrical damage.
- Ensure all connections are secure and properly insulated to avoid electrical shorts.
- Instalazio prozesuaren edozein atalen inguruan ziur ez bazaude, kontsultatu automobilgintzako elektrizista kualifikatu bati.
- Do not modify the harness adapter. Unauthorized modifications can lead to malfunction or damage.
- Mantendu produktua hezetasunetik eta muturreko tenperaturatik urrun.
3. Paketearen edukia
Please verify that all components are present before proceeding with the installation:
- Connects2 CT20VX04 Harness Adapter (Main Unit)
- Fakra Antenna Adapter with Phantom Power Supply
- Vehicle-Specific ISO Connector
1. irudia: The Connects2 CT20VX04 Harness Adapter. This image displays the primary wiring loom, including the vehicle-specific ISO connector for power and speakers, and the Fakra antenna adapter with its integrated phantom power supply.
4. Bateragarritasuna
The Connects2 CT20VX04 Harness Adapter is compatible with the following Vauxhall vehicle models from 2004 onwards:
- Vauxhall Astra H (2004 onwards)
- Vauxhall Corsa C (2004 onwards)
- Vauxhall Vectra C (2004 onwards)
- Vauxhall Tigra (2004 onwards)
Oharra: Vehicle compatibility may vary based on specific trim levels or factory-fitted options. Always verify the existing wiring harness in your vehicle matches the adapter's connectors before installation.
5. Konfigurazioa eta instalazioa
Follow these steps carefully to install the harness adapter:
- Ibilgailua prestatu: Ensure the vehicle's ignition is off. Disconnect the negative terminal of the car battery to prevent electrical shorts during installation.
- Kendu dagoen unitate nagusia: Carefully remove the factory-fitted car stereo from the dashboard. Refer to your vehicle's service manual for specific removal instructions.
- Connect Power/Speaker Harness: Locate the vehicle's factory wiring harness. Connect the vehicle-specific ISO connector from the CT20VX04 adapter to the corresponding connector in your vehicle. Ensure a firm and secure connection.
- Konektatu antena egokitzailea: Locate the vehicle's Fakra antenna connector. Connect the Fakra antenna adapter from the CT20VX04 to the vehicle's antenna cable. The adapter includes a phantom power supply, which is essential for active (amplified) factory antennas to function correctly with an aftermarket head unit.
- Connect to Aftermarket Head Unit: Connect the ISO and DIN antenna connectors from the CT20VX04 adapter to the corresponding ports on your new aftermarket car stereo.
- Proba konexioak: Before fully reassembling the dashboard, reconnect the vehicle's negative battery terminal. Turn on the ignition and test the new head unit's functionality, including power, audio output from all speakers, and radio reception.
- Seguru eta berriro muntatu: Once all functions are verified, disconnect the battery again. Secure all wiring to prevent rattles or damage. Carefully reinstall the aftermarket head unit and reassemble the dashboard components. Reconnect the battery.
6. Funtzionamendu-argibideak
The Connects2 CT20VX04 Harness Adapter is a passive component designed to facilitate the connection of an aftermarket head unit. Once correctly installed, its operation is integrated with the functionality of your new car stereo. Refer to your aftermarket head unit's instruction manual for specific operating procedures.
7. Mantentzea
The CT20VX04 Harness Adapter requires minimal maintenance. Periodically, if you experience issues, you may:
- Check all connections for tightness and corrosion.
- Ensure wiring is not pinched or damaged.
No user-serviceable parts are contained within the adapter. Do not attempt to open or repair the unit.
8. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| No power to aftermarket head unit. |
|
|
| Bozgorailuetatik ez dago soinurik. |
|
|
| Irrati-harrera eskasa edo ez. |
|
|
9. Zehaztapenak
| Modelo zenbakia | CT20VX04 |
| Marka | Konektatzen2 |
| Bateragarritasuna | Vauxhall Astra H, Corsa C, Vectra C, Tigra (2004 onwards) |
| Konektore mota | Vehicle-specific ISO, Fakra Antenna, DIN Antenna |
| Materiala | Akrilonitrilo Butadieno Estirenoa (ABS) |
| Elementuaren pisua | 3.88 ontza (110 gramo) |
| Paketearen neurriak | 11.81 x 5.39 x 2.01 hazbete |
10. Bermea eta Laguntza
Connects2 products are designed for reliability and performance. For warranty information or technical support, please refer to the official Connects2 webwebgunera edo jarri harremanetan zure baimendutako saltzailearekin. Gorde erosketaren frogagiria berme-erreklamazioetarako.
