Showtec LED Par 64 Short Q4-18 Black User Manual

1. Sarrera

This manual provides essential information for the safe and efficient operation of your Showtec LED Par 64 Short Q4-18 Black. This LED PAR floor spot is designed for professional lighting applications, offering versatile illumination for various events and venues. Please read this manual thoroughly before operating the device to ensure proper usage and to prevent damage or injury.

2. Segurtasun informazioa

Always observe the following safety precautions to reduce the risk of electric shock, fire, or personal injury:

• Ensure the device is connected to a grounded power outlet with the correct voltage (2.4E+2 Volts AC).
• Ez jarri gailua euri edo hezetasunera.
• Do not open the housing. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
• Ziurtatu unitatearen inguruan aireztapen egokia dagoela gehiegi berotzea saihesteko.
• Saihestu argi-iturriarekiko begien esposizio zuzena.
• Deskonektatu beti energia-iturria garbitu edo mantentze-lanak egin aurretik.
• Kontu handiz maneiatu gailua. Saihestu erortzea edo kolpe bortitzak jasatea.

3. Produktua amaitu daview

The Showtec LED Par 64 Short Q4-18 is a robust lighting fixture designed for durability and performance. Below are key viewproduktuaren s:

3.1. irudia: Aurrealdea view of the Showtec LED Par 64 Short Q4-18 Black, showing the LED array and the sturdy black aluminum housing with its adjustable yoke.

Figure 3.2: The LED Par 64 with its powerful LEDs illuminated, demonstrating its light output capability.

Figure 3.3: Rear panel of the unit, featuring the digital display, control buttons (Mode, Setup, Up, Down), DMX In/Out ports, and the fuse holder (1A/250V).

4. Konfigurazioa

Follow these steps to set up your LED Par 64 Short Q4-18:

1. Muntaketa: Securely mount the fixture using the integrated yoke. Ensure it is stable and can support the weight of the unit (4.05 kg).
2. Potentzia-konexioa: Connect the power cable to a suitable grounded AC power outlet (2.4E+2 Volts AC).
3. DMX konexioa (aukerakoa): For DMX control, connect a DMX cable from your DMX controller to the DMX In port on the rear panel. If linking multiple units, connect from the DMX Out of the first unit to the DMX In of the next.
4. Hasierako piztea: Once connected, the unit will power on and the display on the rear panel will illuminate.

5. Funtzionamendua

The LED Par 64 Short Q4-18 can be operated in various modes, including standalone and DMX control.

5.1 Kontrol-panela amaituview

The rear control panel (refer to Figure 3.3) features a digital display and four buttons:

• Modua: Cycles through different operating modes (e.g., DMX, Auto, Sound Active).
• Konfigurazioa: Enters/confirms settings within a selected mode.
• Gora: Menu aukeretan gora nabigatzen du edo parametroen balioak handitzen ditu.
• Behera: Menu aukeretan behera nabigatzen du edo parametroen balioak txikitzen ditu.

5.2 DMX kontrola

To control the fixture via DMX, set the DMX address using the control panel. Consult the specific DMX channel chart (usually provided in a separate DMX manual or appendix) for detailed control parameters such as dimmer, color mixing, and strobe effects.

5.3 Standalone Modes

Use the 'Mode' button to select standalone programs. These may include:

• Auto programak: Pre-programmed light shows that run automatically.
• Soinu aktiboa: Argiak inguruko soinuei erreakzionatzen die mikrofono integratu baten bidez.
• Kolore estatikoa: Select and display a single static color.

Use the 'Up' and 'Down' buttons to adjust parameters within these modes (e.g., program speed, sound sensitivity, color intensity).

6. Mantentzea

Regular maintenance ensures the longevity and optimal performance of your LED Par 64 Short Q4-18.

• Garbiketa: Disconnect power before cleaning. Use a soft, lint-free cloth to wipe the exterior. For stubborn dirt, a slightly damp oihal bat erabil daiteke. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Lenteen garbiketa: Gently clean the LED lenses with a soft cloth and a mild glass cleaner if necessary.
• Fusiblearen ordezkapena: If the unit does not power on, check the fuse located on the rear panel (refer to Figure 3.3). Replace with a fuse of the same type and rating (1A/250V).
• Ikuskapena: Periodically inspect power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.

7. Arazoak

Atal honek aurki ditzakezun arazo ohikoenei heltzen die.

If the problem persists after attempting these solutions, please contact Showtec customer support.

8. Zehaztapenak

9. Bermea eta Laguntza

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Showtec webgunea. Gorde erosketaren egiaztagiria berme-erreklamazioetarako.

Fabrikatzailea: Showtec

Webgunea: www.highlite.com/en/brands/showtec