Sarrera
This manual provides comprehensive instructions for the safe and effective use, installation, and maintenance of your MIPRO MB-70 Replacement Rechargeable 12V Battery. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Segurtasun informazio garrantzitsua
Always observe the following safety precautions to prevent injury or damage to the battery and connected equipment:
- Ez laburtu zirkuitu bateriaren terminalak.
- Ez expose the battery to extreme temperatures, direct sunlight, or fire.
- Ez Murgildu bateria uretan edo beste likido batzuetan.
- Ez attempt to open, disassemble, or modify the battery.
- Mantendu bateria haurren eta animalien eskura.
- Bota agortuta dauden bateriak tokiko araudiaren arabera.
- Use only chargers specified for 12V lead-acid batteries.
Produktua amaituview
The MIPRO MB-70 is a high-quality, rechargeable 12V lead-acid battery designed as a replacement for compatible MIPRO audio equipment and other devices requiring a 12V power source. It provides reliable and consistent power for extended operation.
Image 1: The MIPRO MB-70 Replacement Rechargeable 12V Battery. This image shows the compact, rectangular form factor of the battery, typically black or dark gray, with visible terminals for connection.
Instalazio-argibideak
Follow these steps to safely install the MIPRO MB-70 battery into your compatible device:
- Itzali gailua: Ensure the device requiring the battery replacement is completely powered off and disconnected from any power sources.
- Bilatu bateriaren konpartimendua: Identify and open the battery compartment on your device. Refer to your device's manual for specific instructions.
- Kendu bateria zaharra: Carefully disconnect the old battery, noting the polarity (positive and negative terminals). Remove the old battery from the compartment.
- Sartu bateria berria: Insert the MIPRO MB-70 battery into the compartment, ensuring the terminals align correctly with the device's connectors. Connect the positive (+) terminal first, then the negative (-) terminal.
- Konpartimentu segurua: Itxi eta ziurtatu bateriaren konpartimendua.
- Hasierako karga: It is recommended to fully charge the battery before its first use. Refer to the "Charging the Battery" section.
Bateria kargatzen
To ensure optimal performance and battery life, follow these charging guidelines:
- Use a compatible 12V lead-acid battery charger. Using an incorrect charger can damage the battery or pose a safety risk.
- Connect the charger to the battery terminals, ensuring correct polarity (positive to positive, negative to negative).
- Entxufatu kargagailua korronte-hartune egoki batera.
- Allow the battery to charge until the charger indicates a full charge (refer to your charger's instructions).
- Avoid overcharging, as this can reduce battery life. Disconnect the charger once the battery is fully charged.
- Kargatu bateria ondo aireztatutako leku batean.
Battery Maintenance and Storage
Proper maintenance and storage will extend the life of your MIPRO MB-70 battery:
- Ohiko karga: If the battery is not used for extended periods, recharge it every 3-6 months to prevent deep discharge, which can permanently damage lead-acid batteries.
- Garbitu terminalak: Keep the battery terminals clean and free of corrosion. Use a dry cloth to wipe them if necessary.
- Biltegiratzeko baldintzak: Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures. The ideal storage temperature is between 20°C and 25°C (68°F and 77°F).
- Saihestu isurketa sakona: Do not allow the battery to completely discharge. Recharge it as soon as possible after use.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Bateria ez da kargatzen | Charger not connected properly; Faulty charger; Deeply discharged battery; Damaged battery. | Check charger connections; Try a different charger; Allow extended charging time for deeply discharged batteries (if applicable); Replace battery if damaged. |
| Short operating time after full charge | Battery capacity degradation; Incomplete charge; High power consumption by device. | Ensure full charge cycle; Consider battery replacement if capacity is significantly reduced; Check device for abnormal power draw. |
| Bateriaren terminalak herdoilduta | Exposure to moisture or improper storage. | Clean terminals with a dry cloth or a soft brush. Ensure proper storage conditions. |
Hemen zerrendatzen ez diren arazorik baduzu edo irtenbideek arazoa konpontzen ez badute, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin.
Zehaztapenak
| Marka | MIPRO |
| Modelo zenbakia | D5741 (MB-70) |
| liburukiatage | 12 Volt |
| Bateriaren zelulen konposizioa | Berun Azidoa |
| Bateria Edukiera | 4.5 Amp Orduak |
| Elementuaren pisua | 3 libra (gutxi gorabehera 1.36 kg) |
| UPC | 806593457418 |
| Eskuragarri dagoen lehen data | 14ko azaroaren 2012a |
Bermea eta Laguntza
For warranty information and technical support, please refer to the documentation provided with your original MIPRO product or visit the official MIPRO webgunea. Gorde erosketa-agiria erosketaren frogagiri gisa berme-erreklamazioetarako.
For further assistance, you may contact the seller directly via the platform where the purchase was made.
Produktuen bideoak
Ez dago produktuaren bideo ofizialik txertatzeko eskuragarri une honetan.