1. Sarrera
Eskerrik asko erosketagatik.asing the Byron BYR301 Wireless Door Chime Kit. This kit provides a convenient and reliable solution for your home or office, featuring a portable chime unit with an optional flashing light and a wireless push button. This manual contains important information regarding the installation, operation, and maintenance of your new door chime kit. Please read these instructions carefully before use and retain them for future reference.
2. Paketearen edukia
Ziurtatu elementu guztiak paketean daudela:
- 1 x Portable Chime Unit
- 1 x Haririk gabeko botoia
- 1 x CR2032 Battery (for Push Button)
- Mounting Hardware (screws, adhesive pad)
- Erabiltzailearen eskuliburua
Figure 2.1: Package contents including the chime unit, push button, and packaging.
3. Segurtasun informazioa
- Do not expose the chime unit or push button to extreme temperatures, direct sunlight, or moisture.
- Use only the specified battery types. Incorrect battery types may cause damage or explosion.
- Mantendu bateriak haurren eskura. Irensten bada, bilatu berehala medikuaren arreta.
- Do not attempt to open or repair the devices yourself. Refer all servicing to qualified personnel.
- Dispose of old batteries and electronic devices responsibly, following local regulations.
4. Produktua amaitu daview
Familiarize yourself with the components of your Byron BYR301 Wireless Door Chime Kit.
Figure 4.1: Labeled diagram of the portable chime unit and wireless push button.
4.1. Portable Chime Unit Features
- High Quality Speaker: For clear sound output.
- 8 Melodies: Select from a variety of chime sounds.
- Bolumen kontrola: Adjust the chime volume (4 levels).
- Argi keinukaria: Visual alert for incoming visitors.
- Bateriaren konpartimendua: Requires 3 x C batteries (not included).
4.2. Wireless Push Button Features
- Sakatu botoia: Activates the chime unit.
- Bateria: 1 x CR2032 bateriaz elikatzen da (barne).
- Eguraldiarekiko erresistentea: Egokia kanpoko erabilerarako.
5. Konfigurazioa
5.1. Installing Batteries in the Chime Unit
- Locate the battery compartment on the underside of the portable chime unit.
- Ireki bateriaren konpartimenduaren estalkia.
- Insert 3 x C batteries (LR14, not included) according to the polarity markings (+/-) inside the compartment.
- Itxi bateriaren konpartimenduaren estalkia ondo.
5.2. Installing Battery in the Push Button
- The CR2032 battery is typically pre-installed. If not, open the push button casing (usually by gently prying it open with a small screwdriver).
- Sartu CR2032 bateria alde positiboa (+) gora begira duela.
- Itxi casing segurtasunez.
Figure 5.1: Wireless Push Button.
5.3. Sakagailuaren muntaketa
The push button is designed for outdoor use and can be mounted using screws or the provided adhesive pad.
- Aukeratu atearen ondoan dagoen toki egoki bat, bisitariek erraz eskura dezaten.
- Torlojuak erabiliz: Mark the desired drilling points, drill pilot holes, and secure the push button base with the provided screws. Snap the front cover back on.
- Using Adhesive Pad: Clean the mounting surface thoroughly. Peel off the protective backing from the adhesive pad and firmly press the push button onto the surface for at least 30 seconds.
- Ensure the push button is mounted vertically for optimal performance.
5.2. irudia: Adibample of push button installation.
5.4. Pairing (Automatic Learning)
The Byron BYR301 features automatic learning. Typically, the push button and chime unit are pre-paired at the factory. If they do not connect automatically, or if you are adding another push button, follow these steps:
- Ensure both the chime unit and push button have fresh batteries installed.
- Press and hold the pairing button (refer to the chime unit diagram for location, usually a small button or switch) on the chime unit until it emits a short sound or its indicator light flashes.
- Within 10 seconds, press the wireless push button. The chime unit should sound, indicating successful pairing.
- Test the connection by pressing the push button. The chime unit should sound.
Figure 5.3: Wireless range illustration (up to 100m in open air).
6. Funtzionamendu-argibideak
6.1. Melodiak aldatzea
The chime unit offers 8 different melodies. To change the melody:
- Locate the melody selection button on the chime unit (refer to Figure 4.1).
- Press this button repeatedly to cycle through the available melodies. The chime unit will play each melody as you select it.
- Stop pressing when you hear your desired melody.
6.2. Bolumena doitzea
The chime unit has 4 volume levels. To adjust the volume:
- Locate the volume control button on the chime unit (refer to Figure 4.1).
- Press this button repeatedly to cycle through the volume levels (low, medium, high, extra loud).
- Stop pressing when you reach your desired volume level.
6.3. Using the Flashing Light
The chime unit features an optional flashing light for a visual alert.
- The flashing light activates automatically when the chime sounds.
- There is typically no separate control for the flashing light; it operates in conjunction with the chime.
7. Mantentzea
7.1. Bateria ordezkatzea
- Txirrina unitatea: Replace the 3 x C batteries when the chime sound becomes weak or the unit stops functioning. Follow the steps in Section 5.1.
- Sakatu botoia: Replace the CR2032 battery when the chime unit no longer responds to the push button. Follow the steps in Section 5.2.
- Always use fresh, high-quality batteries of the specified type.
7.2. Garbiketa
- Garbitu txirrin-unitatea eta botoia zapi leun eta lehor batekin.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the surfaces.
- Ensure no moisture enters the units during cleaning.
8. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Chime unit does not sound. | Txirrina-unitatean bateriak hilda edo gaizki instalatuta daude. Bateria hilda edo gaizki instalatuta dago sakagailuaren barruan. Chime unit and push button are not paired. Eremuz kanpo. |
Replace C batteries in chime unit, ensuring correct polarity. Replace CR2032 battery in push button, ensuring correct polarity. Egin parekatze-prozedura (5.4 atala). Hurbildu txirrin-unitatea botoira. |
| Chime sounds intermittently. | Bateria baxuak. Beste haririk gabeko gailuen interferentziak. Unitateen arteko oztopoak. |
Ordeztu bateriak bi unitateetan. Relocate chime unit or push button away from potential interference sources. Ensure clear line of sight or fewer obstructions between units. |
| Flashing light does not work. | Chime unit batteries are low or dead. | Replace C batteries in the chime unit. |
9. Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Modelo zenbakia | BY301 |
| Fabrikatzailea | Byron |
| Txirrina Unitatearen Potentzia | 3 x C (LR14) batteries (not included) |
| Sakatu botoia boterea | 1 x CR2032 bateria (barne) |
| Wireless Range | 100 metro arte (aire zabalean) |
| Doinuak | 8 |
| Bolumen-mailak | 4 (including extra loud) |
| Alerta bisuala | Optional Flashing Light |
| Dimentsioak (Txirrin-unitatea) | Gutxi gorabehera. 6 x 20 x 24 cm |
| Pisua | 240 grams (total kit) |
| Materiala | Plastikozko casing |
| Ziurtagiria | CE |
| Usage (Push Button) | Kanpoan |
10. Bermea eta Laguntza
For detailed warranty information, please refer to the documentation included with your purchase or visit the official Byron website. If you encounter any issues not covered in the troubleshooting section, please contact Byron customer support for assistance.
- Lineako laguntza: www.byron.com/support (adibampesteka, egiaztatu ofiziala mesedez webgunea)
- Posta elektronikoa: support@byron.com (adibample email, please verify official contact)





