1. Sarrera
This manual provides essential instructions for the safe and effective use of the OMRON H3CR-A Multi-Function Solid-State Timer. The H3CR-A is a versatile industrial timer designed for precise control in various applications, offering multiple operating modes and a wide time setting range. Please read this manual thoroughly before installation and operation, and retain it for future reference.
2. Segurtasun informazioa
OHARRA: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel. Disconnect all power before working on the timer or its associated circuitry.
- Ziurtatu elikadura hornidura boltage matches the timer's specifications (AC100-240V or DC100-125V).
- Do not operate the timer in environments exceeding its specified temperature and humidity ranges.
- Egiaztatu kableatu-konexio guztiak ondo eta ondo daudela korrontea jarri aurretik.
- Avoid exposing the timer to excessive vibration, shock, or corrosive gases.
3. Produktua amaitu daview
The OMRON H3CR-A is an 11-pin, DPDT (Double Pole Double Throw) relay output, multi-function solid-state timer. It supports a broad timing range from 0.05 seconds up to 300 hours and operates on both AC (100-240V) and DC (100-125V) power supplies. Its compact design and robust construction make it suitable for various industrial control applications.
1. irudia: OMRON H3CR-A Timer Product Box Label. This image displays the product packaging, clearly showing the model type H3CR-A, time range (1.2s to 300h), and voltage specifications (100 to 240 V AC, 100 to 125 V DC). The OMRON brand logo and manufacturing origin (Made in Indonesia) are also visible, along with a barcode and QR code.
4. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Eredua | H3CR-A |
| Bolumen eragileatage | AC100-240V (50/60 Hz), DC100-125V |
| Denbora tartea | 0.05 seconds to 300 hours (adjustable) |
| Irteera mota | DPDT Relay Output |
| Pin kopurua | 11-PIN |
| Funtzioak | Multi-Function (various operating modes) |
| Sarrera mota | No-Voltage Sarrera |
| Materiala | Metala, Plastikoa |
| Neurriak (L x W x H) | 2.62" x 1.89" x 1.89" (66.5 mm x 48 mm x 48 mm) |
| Elementuaren pisua | 0.09 kilogramo (gutxi gorabehera 3.17 ontza) |
| Ziurtagiriak | CSA, UL |
5. Konfigurazioa
5.1 Muntaketa
The H3CR-A timer is designed for panel mounting or surface mounting using a compatible 11-pin socket (sold separately). Ensure the mounting location is stable, free from excessive vibration, and allows for adequate ventilation.
5.2 Kableatua
Refer to the wiring diagram provided with your 11-pin socket and the timer's terminal designations. Ensure all connections are made correctly and securely. Incorrect wiring can lead to malfunction or damage.
- Elikatze-iturria: Connect the appropriate AC (100-240V) or DC (100-125V) power to the designated power terminals.
- Kontrol-sarrera: Connect the no-voltage input for starting/stopping the timer as per your application requirements.
- Irteerako kontaktuak: Connect the DPDT relay output contacts to the controlled device.
6. Funtzionamendu-argibideak
The OMRON H3CR-A features front-panel controls for setting the time range, operating mode, and time value.
6.1 Time Range Setting
Use the rotary switch on the front panel to select the desired time unit (seconds, minutes, or hours) and the corresponding multiplier. For example, to set a time of 10 minutes, you would select the 'min' unit and an appropriate multiplier range.
6.2 Operating Mode Selection
The H3CR-A supports multiple operating modes (e.g., ON-delay, OFF-delay, interval, etc.). Refer to the detailed mode diagrams typically found on the timer's side or in a supplementary datasheet for specific mode selection procedures. A dedicated switch or dial is usually present for this purpose.
6.3 Time Value Setting
Once the time range and operating mode are selected, use the main time setting dial to adjust the precise time value within the chosen range. The timer will begin counting when the control input is activated, according to the selected mode.
7. Mantentzea
The OMRON H3CR-A is designed for long-term reliability with minimal maintenance. However, periodic checks are recommended:
- Garbiketa: Keep the timer's exterior clean and free from dust and debris. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Konexioaren ikuskapena: Periodically check all wiring connections for tightness and signs of corrosion or damage.
- Ingurumen-kontrola: Ziurtatu funtzionamendu-ingurunea zehaztutako tenperatura eta hezetasun mugen barruan dagoela.
8. Arazoak
If the timer does not operate as expected, perform the following basic checks:
- Potentziarik gabe: Verify that the power supply is connected and providing the correct voltage (AC100-240V or DC100-125V). Check fuses or circuit breakers.
- Kableatu okerra: Double-check all wiring connections against the provided diagrams.
- Improper Settings: Ensure the time range, operating mode, and time value are set correctly for your application.
- Control Input Issue: Confirm that the control input signal is being properly applied and detected by the timer.
- Unitate Kaltetua: If the above steps do not resolve the issue, the unit may be damaged. Do not attempt to repair it yourself.
9. Bermea eta Laguntza
For warranty information, technical support, or service, please refer to the official OMRON website or contact your authorized OMRON distributor. Keep your purchase receipt for warranty claims.
OMRON Korporazioa
Laguntza gehiago lortzeko, bisitatu www.omron.com
