Red Lion RL-WC50TA Cast Iron Sewage Pump User Manual

1. Sarrera

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Red Lion RL-WC50TA Cast Iron Sewage Pump. Please read all instructions carefully before use to ensure proper function and longevity of the product.

The Red Lion RL-WC50TA is a robust 1/2 HP submersible pump designed for high-volume transfer of sewage or effluent. It is capable of handling semi-solids up to 2 inches in diameter, making it suitable for applications such as basement washrooms, sewage systems, or holding tanks. This pump is equipped with a piggyback tethered float switch for automatic operation.

Important: This pump is not recommended for pond use.

2. Segurtasun informazioa

Always prioritize safety during installation, operation, and maintenance. Failure to follow safety guidelines can result in serious injury or property damage.

• Segurtasun elektrikoa: Ensure the power supply matches the pump's requirements (115 Volts). Always disconnect power before servicing the pump. Use a ground fault circuit interrupter (GFCI) for electrical connections.
• Norberaren Babeserako Ekipamendua (PPE): Wear appropriate PPE, including gloves and eye protection, when handling the pump or working with wastewater.
• Instalazio egokia: Install the pump according to local plumbing and electrical codes. Ensure the pump is placed on a solid, level surface in the basin.
• Material arriskutsuak: Be aware that sewage and effluent contain hazardous biological materials. Avoid direct contact and ensure proper disposal.
• Haurrak eta maskotak: Keep children and pets away from the pump and installation area.

3. Produktua amaitu daview

The Red Lion RL-WC50TA is engineered for durability and reliable performance in demanding wastewater applications.

Figure 1: Red Lion RL-WC50TA Cast Iron Sewage Pump with tethered float switch.

Ezaugarri nagusiak:

• Eraikuntza gogorra: Cast iron housing and vortex-style impeller for durability and efficient solids handling.
• Solidoen manipulazioa: Capable of passing semi-solids up to 2 inches in diameter, preventing clogs.
• Funtzionamendu automatikoa: Piggyback tethered float switch for automatic activation and deactivation based on water levels.
• Motoraren babesa: 1/2 HP PSC dual bearing motor with thermal overload protection for extended life.
• CSA zerrendatua: Certified for safety in both USA and Canada.

Barne osagaiak:

Figure 2: Diagram illustrating the internal components of the RL-WC50TA, including the 1/2 HP high-efficiency PSC motor with thermal overload protection, dual ball bearings, cast iron housing, stainless steel rotor shaft, cast iron vortex style impeller, and 2-inch FNPT threaded discharge.

4. Konfigurazioa eta instalazioa

Proper installation is critical for the performance and safety of your sewage pump. If you are unsure about any step, consult a qualified professional.

Instalazio aurreko egiaztapen-zerrenda:

• Verify power supply (115 Volts).
• Ziurtatu basin diameter is at least 18 inches.
• Gather necessary tools and plumbing fittings (2-inch FNPT discharge).
• Confirm the installation area is clear and accessible.

Instalazio urratsak:

1. Prestatu B.asin: Ensure the sump basin is clean and free of debris. The pump should rest on a solid, level surface at the bottom of the basin.
2. Connect Discharge Piping: Attach a 2-inch FNPT discharge pipe to the pump outlet. Use appropriate sealant or tape to ensure a watertight connection.
3. Install Check Valve: Install a check valve in the discharge line above the pump to prevent backflow of water into the basin.
4. Ponpa kokatu: Carefully lower the pump into the basin. Ensure the float switch can move freely without obstruction from the pump, basin walls, or piping.
5. Konexio elektrikoa: Connect the pump's 10-ft. power cord to a dedicated 115 Volt, GFCI-protected outlet. The piggyback plug allows for automatic or manual operation.

Understanding Pump Types (Video):

For a better understanding of different pump types and their applications, including sewage and effluent pumps, please watch the following informational video:

5. Funtzionamendu-argibideak

The Red Lion RL-WC50TA operates automatically via its tethered float switch. It can also be manually tested.

Funtzionamendu automatikoa:

• The pump will activate when the water level reaches approximately 17.5 inches.
• The pump will continue to run until the water level falls to approximately 7.5 inches, at which point it will shut off.
• Ensure the float switch has a clear path of travel and is not restricted by any objects in the basin.

Figure 3: Illustration of the piggyback float switch and its activation/deactivation levels for automatic operation. The piggyback plug allows for switching to manual mode for testing or maintenance.

Manual Operation/Testing:

The piggyback plug design allows for manual testing of the pump. To operate manually, simply unplug the float switch plug from the wall outlet, then plug the pump's main power cord directly into the wall outlet. The pump will run continuously. To return to automatic operation, unplug the pump's main power cord and re-insert the float switch plug into the wall outlet.

Caution: Do not run the pump dry for extended periods in manual mode, as this can cause damage.

6. Mantentzea

Mantentze-lan erregularrak errendimendu optimoa bermatzen du eta ponparen bizitza luzatzen du.

• Hileko ikuskapena: Check the sump basin for excessive debris. Remove any large objects that could obstruct the float switch or pump intake.
• Flotagailuaren egiaztapena: Periodically test the float switch by manually raising it to ensure the pump activates and deactivates correctly.
• Impulsore garbia: If the pump's performance decreases, disconnect power and inspect the impeller for clogs or buildup. Clean as necessary.
• Elikatze-kablearen ikuskapena: Aztertu elikatze-kablea kalterik, higadurarik edo deseginik dagoen ikusteko. Kaltetuta badago, ordezkatu.
• Negua (hala badagokio): If the pump is in an area subject to freezing temperatures and will not be used, remove it from the basin, clean it thoroughly, and store it in a dry, frost-free location.

7. Arazoak

Ikusi beheko taula arazo ohikoenak eta haien irtenbide posibleak ikusteko.

8. Zehaztapenak

Detailed technical specifications for the Red Lion RL-WC50TA Sewage Pump.

Figure 4: Dimensions diagram for the Red Lion RL-WC50TA Sewage Pump. Height (A): 15.8" (401 mm), Length (B): 9" (229 mm), Width (C): 6" (152 mm), Weight: 30 lbs (13.6 kg).

Figure 5: Performance curve and table for the Red Lion RL-WC50TA, showing Gallons Per Hour (GPH) at various lift heights and the shut-off point.

9. Bermea

The Red Lion RL-WC50TA Sewage Pump comes with a 2 urteko fabrikatzailearen bermea. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact Red Lion customer support.

10. Laguntza

For technical assistance, product inquiries, or warranty support, please contact Red Lion customer service. You can also visit the official Red Lion webbaliabide osagarriak eta galderak egiteko gunea.

• Lehoi Gorria Webgunea: Visit the Red Lion Store on Amazon
• Laguntza teknikoa: Refer to your product packaging or the Red Lion webgunea kontaktu-informazio eguneratuena lortzeko.