Woods L1313

Woods L1313 Rechargeable LED Work Light

Eredua: L1313

1. Sarrera

The Woods L1313 Rechargeable LED Work Light is a portable lighting solution designed for various tasks requiring bright, reliable illumination. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your work light.

Segurtasun informazio garrantzitsua

  • Irakurri argibide guztiak erabili aurretik.
  • Ez desmuntatu unitatea. Konponketa-lanak langile kualifikatuei eskatu.
  • Mantendu material sukoietatik urrun.
  • Do not expose to excessive moisture or immerse in water.
  • Erabili emandako kargagailua soilik.
  • Bota bateriak tokiko araudiaren arabera.

2. Paketearen edukia

Egiaztatu behean zerrendatutako elementu guztiak zure paketean daudela:

  • Woods L1313 Rechargeable LED Work Light (1 unit)
  • 12-Volt 500mA Transformer (AC charging adapter)
  • 7-Volt 1300mAh Li-ion Rechargeable Batteries (pre-installed)

3. Konfigurazioa eta hasierako karga

Before first use, fully charge the work light. The unit can be charged while in use.

  1. Unpack the Work Light: Carefully remove the work light and all accessories from the packaging.
  2. Konektatu kargagailua: Plug the 12-volt 500mA transformer into a standard wall outlet. Connect the other end of the charger cable to the charging port on the work light.
  3. Hasierako karga: Allow approximately 3 hours for a full charge. The charging indicator (if present) will typically change color or turn off when charging is complete.
Woods L1313 Rechargeable LED Work Light with charger connected

Figure 1: Woods L1313 Work Light connected to its charger. Ensure the charger is securely plugged into both the light and a power outlet for optimal charging.

4. Funtzionamendu-argibideak

Piztu/Itzaltzea

Locate the weatherproof On/Off switch on the unit. Press the switch to turn the light ON. Press it again to turn the light OFF.

Positioning the Work Light

The work light features an adjustable stand, allowing you to direct the light beam as needed. The unit is designed to remain cool to the touch during operation, making it safe to handle and reposition.

Woods L1313 Work Light illuminating a painting task

Figure 2: The Woods L1313 Work Light positioned to illuminate a detailed task. Its adjustable design allows for precise light direction.

Battery Life and Charging During Use

A fully charged battery provides approximately 2 hours of continuous operation. For extended use, the work light can operate while simultaneously charging. Simply keep the 12-volt 500mA transformer plugged into both the light and a power source.

5. Mantentzea

Garbiketa

To clean the work light, ensure it is turned off and unplugged. Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents. Avoid spraying water directly onto the unit.

Biltegiratzea

Store the work light in a cool, dry place away from direct sunlight and extreme temperatures. For prolonged storage, it is recommended to fully charge the battery every 3-6 months to maintain battery health.

Bateria ordezkatzea

The 7-volt 1300mAh Li-ion rechargeable batteries are designed for long life (rated 50,000 hours for LEDs). If battery performance significantly degrades, contact customer support for replacement options. Do not attempt to replace batteries yourself unless specifically instructed by the manufacturer.

6. Arazoak

ArazoaKausa posibleaIrtenbidea
Argia ez da pizten.Bateria agortuta dago.
Kargagailua ez dago behar bezala konektatuta.
Etengailu akastuna.
Kargatu bateria gutxienez 3 orduz.
Ensure charger is securely plugged into both the light and a working outlet.
Jarri harremanetan bezeroarentzako laguntzarekin.
Short battery run time.Bateria ez dago guztiz kargatuta.
Battery life degraded.
Ensure a full 3-hour charge.
Consider replacing the battery (contact support).
Argia distira edo iluntzen da.Bateria gutxi.
Konexio soltea.
Kargatu unitatea.
Check charger connection. If problem persists, contact support.
Kargagailuak ez du funtzionatzen.Hargune akastuna.
Kaltetutako kargagailua.
Probatu beste irteera batekin.
Inspect charger for damage. Contact customer support for a replacement.

7. Zehaztapenak

EzaugarriXehetasuna
Modelo zenbakiaL1313
Argi iturria108 LED bonbilla
Argi Fluxua350 lumen
Kolore TenperaturaApproximately 6500K (Daylight)
LED Life Rating50,000 ordu
Energia iturriaBattery Powered / AC Adapter
Bateria mota7-Volt 1300mAh Li-ion Rechargeable
Bateriaren iraupena2 ordu baino gehiago
Kargatzeko Denbora3 ordu
Kargagailuaren sarrera120-Volt AC
Kargagailuaren irteera12-Volt 500mA
Kablearen luzera6 oin
MaterialaABS
AmaituSafety Green Powder Coated
Ezaugarri bereziakRechargeable, Cool to the touch, Weatherproof On/Off switch, High output mirror reflector with Webb Optics
Neurriak16 x 14 x 17 hazbete (Produktuaren neurriak)
Pisua2.8 kilo
ZiurtagiriakETL zerrendatua

8. Bermea eta bezeroarentzako laguntza

Bermearen informazioa

This Woods L1313 Rechargeable LED Work Light comes with a 1 urteko berme mugatua erosketa-datatik aurrera. Berme honek materialen eta fabrikazioaren akatsak estaltzen ditu erabilera normalaren pean. Ez ditu estaltzen erabilera okerraren, abusuaren, istripuen, baimenik gabeko konponketen edo higadura normalaren ondoriozko kalteak. Gorde erosketaren egiaztagiria berme-erreklamazioetarako.

Bezeroarentzako Arreta

For technical assistance, warranty claims, or to inquire about replacement parts, please contact Woods customer support. Refer to the product packaging or the official Woods webgunea kontaktu-informazio eguneratuena lortzeko.

Sareko baliabideak: Visit the Woods Store on Amazon