Cisco CISCO3925-V/K9 Integrated Services Router User Manual

1. Sarrera

The Cisco 3925 Integrated Services Router (ISR) is designed to deliver highly secure data, voice, video, and application services, primarily for small branch offices. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your CISCO3925-V/K9 router.

Key features include a Modular Services Performance Engine (SPE) 100, three integrated 10/100/1000 Ethernet ports (two capable of RJ-45 or SFP connectivity), four Enhanced High-Speed WAN Interface Card (EHWIC) slots, and integrated power distribution for modules supporting 802.3af Power over Ethernet. It also incorporates integrated threat control using Cisco IOS Firewall, Cisco IOS Zone-Based Firewall, Cisco IOS IPS, and Cisco IOS Content Filtering.

2. Segurtasun informazioa

• Segurtasun elektrikoa: Always connect the router to a grounded power outlet. Do not operate the device with damaged power cords or plugs.
• Aireztapena: Ensure adequate airflow around the router to prevent overheating. Do not block ventilation openings.
• Lekua: Place the router on a stable, flat surface. Avoid locations with excessive dust, moisture, or extreme temperatures.
• Zerbitzua: Refer all servicing to qualified service personnel. Do not attempt to open or repair the router yourself.
• Kableatzea: Use appropriate cabling for network connections. Ensure cables are securely connected and not damaged.

3. Paketearen edukia

Egiaztatu zure paketeak elementu hauek dituela:

• Cisco CISCO3925-V/K9 Integrated Services Router
• Elikatze kablea
• Rack muntatzeko kita (hala badagokio)
• Dokumentazioa (Hasierako Gida Azkarra, Segurtasun Informazioa)

If any items are missing or damaged, contact your vendor or Cisco support immediately.

4. Konfigurazioa

4.1 Instalazio fisikoa

1. Lekua: Position the router in a well-ventilated area, away from direct sunlight and heat sources. Ensure sufficient space for cable routing and air circulation.
2. Muntaketa: The router can be placed on a desktop or mounted in a standard 19-inch equipment rack using the provided rack-mount kit. Follow the instructions included with the rack-mount kit for secure installation.
3. Potentzia-konexioa: Connect the power cord to the router's power input and then to a grounded electrical outlet. Do not power on the device yet.
4. Sare-konexioak:
   • Connect your WAN (Internet) cable to one of the appropriate Ethernet ports (e.g., Gigabit Ethernet ports).
   • Connect your local network devices (computers, switches) to the remaining Ethernet ports.
   • If using voice/fax modules, install them into the EHWIC slots as per their specific instructions and connect telephony lines.

1. irudia: Aurrealdea view of the Cisco CISCO3925-V/K9 Integrated Services Router, showing various ports and status indicators. This image illustrates the physical layout for connecting network cables and power.

4.2 Hasierako piztea eta konfigurazioa

1. Piztu: After all physical connections are made, press the power button on the router. Observe the LED indicators for power and system status.
2. Kontsolarako sarbidea: For initial configuration, connect a console cable from your computer to the router's console port. Use a terminal emulation program (e.g., PuTTY, Tera Term) with settings: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.
3. Cisco IOS Configuration: The router runs Cisco IOS. Follow the on-screen prompts or consult the Cisco IOS Configuration Guides for detailed setup procedures, including IP addressing, routing protocols, security settings, and voice/fax module configuration.
4. Kudeaketa Interfazea: Once basic network connectivity is established, the router can be managed via Telnet, SSH, or a web-based interface (if configured).

5. Routerraren funtzionamendua

The Cisco 3925 ISR is designed for continuous operation. Once configured, it will provide network services automatically. Monitoring and management are typically performed via the Cisco IOS command-line interface (CLI) or network management systems.

• Datu Zerbitzuak: The router facilitates secure data routing between your local network and the internet, supporting various WAN technologies.
• Voice and Fax Services: With the integrated voice/fax module, the router supports IP telephony and traditional fax services, enabling communication within your branch office and with external networks.
• Video and Application Services: The router's performance engine and modular design support the delivery of video and various application services, ensuring quality of service (QoS) for critical traffic.
• Segurtasun Ezaugarriak: Integrated threat control mechanisms, including Cisco IOS Firewall, IPS, and Content Filtering, protect your network from unauthorized access and malicious activities.

6. Mantentzea

6.1 Ohiko egiaztapenak

• LED adierazleak: Periodically check the status LEDs on the front panel to ensure normal operation. Refer to the router's hardware installation guide for LED descriptions.
• Ikuskapen fisikoa: Inspect cables and connections for any signs of wear or damage. Ensure all modules are securely seated.
• Ingurumen-baldintzak: Verify that the operating environment remains within specified temperature and humidity ranges. Ensure ventilation openings are clear.

6.2 Firmware eguneraketak

Aldian-aldian egiaztatu Cisco laguntza website for the latest Cisco IOS software updates. Applying updates can provide new features, performance enhancements, and security patches. Always follow Cisco's recommended procedures for software upgrades to avoid service interruptions.

6.3 Garbiketa

To clean the exterior of the router, use a soft, dry, lint-free cloth. Do not use liquid or aerosol cleaners, as they may damage the device. Ensure the router is powered off before cleaning.

7. Arazoak

Atal honek aurki ditzakezun arazo ohikoenei irtenbideak eskaintzen ditu.

• Potentziarik gabe:
  • Check if the power cord is securely connected to both the router and the electrical outlet.
  • Egiaztatu entxufea funtzionatzen duela beste gailu bat konektatuz.
  • Ensure the power switch on the router is in the 'ON' position.
• Sare konexiorik ez:
  • Egiaztatu Ethernet kablearen konexioak ondo finkatuta daudela eta kalterik ez dagoela ziurtatzeko.
  • Verify the status of the link/activity LEDs on the connected ports.
  • Confirm that the router's network interfaces are correctly configured in Cisco IOS.
  • Check for IP address conflicts or incorrect subnet mask settings.
• Errendimendu motela:
  • Monitor CPU and memory utilization using Cisco IOS commands.
  • Check for high network traffic or potential denial-of-service attacks.
  • Ensure QoS policies are correctly applied to prioritize critical traffic.
• Voice/Fax Issues:
  • Verify that voice/fax modules are correctly installed and recognized by the router.
  • Check voice port configurations and dial-peer settings in Cisco IOS.
  • Ensure proper connectivity to the telephony network.
• Routerrak ez du erantzuten:
  • Attempt to access the router via the console port.
  • If unresponsive, perform a power cycle (power off, wait 10 seconds, then power on).
  • As a last resort, consider a factory reset (consult Cisco documentation for the specific procedure, as this will erase all configurations).

For more advanced troubleshooting, refer to the comprehensive Cisco documentation available on the Cisco support webgunearekin edo jarri harremanetan Cisco Laguntza Teknikoaren Zentroarekin (TAC).

8. Zehaztapenak

9. Bermea eta Laguntza

9.1 Produktuaren bermea

Cisco products typically come with a limited hardware warranty. The exact terms and duration of the warranty may vary depending on your region and the specific purchase agreement. Please refer to the warranty documentation included with your product or visit the official Cisco webbermearen informazio zehatza lortzeko gunea.

9.2 Laguntza Teknikoa

For technical assistance, troubleshooting, or further information regarding your Cisco CISCO3925-V/K9 router, please utilize the following resources:

• Cisco laguntza Webgunea: Access comprehensive documentation, software downloads, and knowledge base articles at www.cisco.com/support.
• Cisco Technical Assistance Center (TAC): For direct support, contact Cisco TAC. Contact information can be found on the Cisco support webgunea.
• Cisco Community: Engage with other Cisco users and experts for peer-to-peer support and discussions.

When contacting support, please have your product model number (CISCO3925-V/K9) and serial number readily available.