1. Sarrera
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Intermatic WG157010D 110V Pool Timer Motor. Please read these instructions thoroughly before proceeding with installation or use. Retain this manual for future reference.
2. Segurtasun informazioa
OHARRA: Risk of electric shock. This product must be installed by a qualified electrician in accordance with all national and local electrical codes. Disconnect power at the circuit breaker or fuse box before installing or servicing this motor.
- Ziurtatu elikatze-iturria motorraren bolumenarekin bat datorrelatage balorazioa (110V).
- Do not operate the motor if it is damaged.
- Mantendu haurrak tresna elektrikoetatik urrun.
- All wiring connections must be secure and properly insulated.
3. Produktua amaitu daview
The Intermatic WG157010D is a replacement motor designed for use in Intermatic pool and spa timers. It provides the necessary mechanical drive to advance the timer mechanism, ensuring accurate scheduling of pool equipment operation.
Figure 1: Intermatic WG157010D 110V Pool Timer Motor. This image displays the Intermatic WG157010D 110V Pool Timer Motor. It features a compact metallic housing with visible internal gears and two white electrical wires extending from one end, each terminated with a ring terminal for connection.
4. Konfigurazioa eta instalazioa
This motor is intended as a direct replacement for existing Intermatic timer motors. Always ensure the replacement motor matches the voltage and specifications of the original motor.
- Potentzia deskonexioa: Before beginning any work, turn off all power to the pool timer at the main circuit breaker. Verify power is off using a voltage probatzailea.
- Access Timer Enclosure: Open the timer enclosure door. Depending on your specific timer model, you may need a screwdriver to remove screws securing the cover.
- Identify and Disconnect Old Motor: Locate the existing timer motor. Note how it is mounted and connected. Carefully disconnect the two electrical wires from the old motor. You may need to loosen terminal screws.
- Motor zaharra kendu: Unmount the old motor from its position. It is typically held in place by screws or clips.
- Motor berria instalatu: Position the new Intermatic WG157010D motor in the same location as the old one. Secure it using the appropriate screws or clips. Ensure the motor's shaft properly engages with the timer's gear mechanism.
- Wire New Motor: Connect the two white electrical wires of the new motor to the corresponding terminals in the timer. Ensure connections are tight and secure. Refer to your specific timer's wiring diagram if unsure.
- Itxi itxitura: Carefully close and secure the timer enclosure door.
- Berrezarri boterea: Piztu berriro etengailu nagusian.
- Proba funtzionamendua: Observe the timer to ensure the motor is functioning correctly and advancing the timer mechanism.
If you are unsure about any step, consult a qualified electrician or pool technician.
5. Funtzionamendu-argibideak
The WG157010D is a motor component of a larger timer system. Its operation is integrated with the timer's overall function. Once installed, the motor continuously drives the timer mechanism as long as power is supplied to it, allowing the timer to accurately track time and activate/deactivate connected pool equipment according to its set schedule.
- Ensure the timer's clock face is set to the correct time after installation.
- Verify that the ON/OFF trippers (if applicable to your timer model) are correctly positioned for your desired schedule.
- The motor operates silently; a lack of movement on the timer's clock face or an incorrect schedule indicates a potential issue.
6. Mantentzea
The Intermatic WG157010D motor is designed for long-term, maintenance-free operation. However, periodic checks of the overall timer system are recommended.
- Ikus-ikuskapena: Periodically inspect the timer enclosure for signs of moisture, insect intrusion, or physical damage.
- Kableatu konexioak: Ensure all electrical connections remain tight and free from corrosion. (Always disconnect power before inspecting wiring.)
- Garbitasuna: Keep the timer enclosure clean and free of debris.
7. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Timer clock not advancing. | No power to the timer; faulty motor; gears jammed. | Check circuit breaker. Verify wiring connections. If power is present, the motor may need replacement. Inspect for obstructions in gears. |
| Timer making unusual noise. | Motor malfunction; foreign object in gears. | Disconnect power and inspect the motor and gears for obstructions. If noise persists, the motor may be failing and require replacement. |
| Timer not switching equipment ON/OFF at set times. | Incorrect tripper settings; timer clock not advancing (see above). | Verify tripper positions. Ensure the timer clock is advancing correctly. |
For issues not listed here, or if troubleshooting steps do not resolve the problem, contact Intermatic customer support or a qualified technician.
8. Zehaztapenak
- Eredua: WG157010D
- liburukiatage: 110V
- Mota: Pool Timer Motor
- Marka: Intermatic
- Paketearen neurriak: 6 x 6 x 6 hazbete
- ASIN: B007OGVADE
- UPC: 852673946488
9. Bermea eta Laguntza
Intermatic products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty statement included with your original timer unit or visit the official Intermatic website. For technical support or replacement parts, please contact Intermatic customer service directly.
Informazio gehiago eta harremanetarako datuak aurki ditzakezu hemen: Intermatic Brand Store on Amazon.
