Buffalo CD400 Professional 800W Meat Grinder Instruction Manual

1. Segurtasun-argibide garrantzitsuak

Please read all instructions carefully before operating the Buffalo CD400 Meat Grinder. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Segurtasun elektrikoa: Ziurtatu elikadura hornidura bolumenarekin bat datorrelatage specified on the appliance. Always plug into a grounded outlet. Do not operate with wet hands or near water. Disconnect power before cleaning or servicing.
• Pala zorrotzak: The grinding plates and blade are extremely sharp. Handle with extreme care during assembly, disassembly, and cleaning. Keep fingers and utensils away from the feeding opening and grinding head during operation.
• Segurtasun pertsonala: Always use the food pusher provided to feed meat into the grinder. Never use your hands or other objects. Keep loose clothing, hair, and jewelry away from moving parts.
• Gainbegiratzea: Tresna hau ez dago gaitasun fisiko, sentsorial edo mental murriztuak dituzten pertsonek erabiltzeko, edo esperientzia eta ezagutza falta dutenek, baldin eta haien segurtasunaz arduratzen den pertsona batek tresna erabiltzeari buruzko gainbegiratzea edo argibideak eman ez baditu. Haurrak gainbegiratu behar dira tresnarekin jolasten ez daitezen.
• Gainkarga babesa: The unit is equipped with overload protection. If the motor stops due to overload, switch off the unit, unplug it, and allow it to cool before attempting to restart. Remove any obstructions.
• Eragiketa egonkorra: Ensure the meat grinder is placed on a stable, level, and dry surface before operation. The non-slip feet help maintain stability.
• Aurreikusitako erabilera: Use this appliance only for its intended purpose of grinding meat. Do not attempt to grind bones, nuts, or other hard materials that could damage the machine.
• Mantentzea: Only perform maintenance as described in this manual. For repairs, contact qualified service personnel.

2. Produktua amaitu daview

The Buffalo CD400 Professional Meat Grinder is a robust appliance designed for efficient meat processing in commercial settings. It features a powerful 800W motor and durable stainless steel components.

2.1. irudia: Aurrealdea view of the Buffalo CD400 Meat Grinder, showcasing its robust stainless steel construction.

2.1 Osagaiak

The meat grinder consists of several key parts:

• Motor-etxebizitza: The main body containing the 800W motor and control panel.
• Elikatzeko erretilua: Haragia xehatu aurretik gordetzeko altzairu herdoilgaitzezko erretilua.
• Elikadura-hodia: Where meat is pushed into the grinding mechanism.
• Auger (Worm): Propels meat through the grinding head.
• Ebakitzeko pala: Sharp blade that cuts the meat against the grinding plate.
• Artezteko plakak: Perforated discs (fine, medium, coarse) that determine the texture of the ground meat.
• Eusteko eraztuna: Artezteko buruaren osagaiak finkatzen ditu.
• Janari-saltzailea: Used to safely push meat into the feeding tube.
• Sausage Stuffing Attachments: Various nozzles for making sausages.
• Kontrol-panela: Includes ON/OFF switch and Reverse function.

Figure 2.2: All components of the Buffalo CD400 Meat Grinder laid out, including the feeding tray, auger, cutting blade, various grinding plates, and sausage stuffing nozzles.

3. Konfigurazioa eta Muntaketa

Before first use, clean all removable parts thoroughly. Ensure the unit is unplugged from the power outlet during assembly.

1. Lekua: Place the motor housing on a stable, level, and dry countertop. Ensure there is adequate space around the unit for ventilation and operation.
2. Lotu ehotzeko burua: Insert the grinding head into the motor housing opening and secure it by turning the locking knob clockwise until tight.
3. Assemble Grinding Components:
   • Insert the auger (worm) into the grinding head.
   • Jarri ebaketa-pala torloju-ardatzean, ertz zorrotzak kanporantz, ehotzeko plakara begira daudela ziurtatuz.
   • Select the desired grinding plate (fine, medium, or coarse) and place it over the cutting blade, aligning the notch on the plate with the pin on the grinding head.
   • Screw on the retaining ring clockwise until it is hand-tight. Do not overtighten.
4. Elikatzeko erretilua erantsi: Place the stainless steel feeding tray onto the top of the grinding head.
5. Potentzia-konexioa: Entxufatu elikatze-kablea lurrera konektatutako entxufe elektriko egoki batera (220 V).

Figure 3.1: The Buffalo CD400 Meat Grinder fully assembled, demonstrating the correct placement of the feeding tray and grinding head.

4. Funtzionamendu-argibideak

Always ensure the unit is properly assembled and plugged in before operation. Prepare your meat before starting the grinder.

4.1 Preparing Meat

• Cut meat into pieces that fit easily into the feeding tube (approximately 2-3 cm cubes).
• Remove any bones, large gristle, or tough tendons to prevent damage to the grinder.
• For best results, chill the meat and grinder components (auger, blade, plates) in the refrigerator for 30 minutes before grinding. This helps prevent smearing and ensures cleaner cuts.

4.2 Grinding Meat

1. Place a suitable container under the grinding head to collect the ground meat.
2. Switch the unit ON using the control switch.
3. Place prepared meat into the feeding tray.
4. Using the food pusher, gently feed the meat into the feeding tube. Never use your hands or fingers.
5. Continue feeding meat until all desired quantity is ground.
6. Once finished, switch the unit OFF and unplug it from the power outlet.

Figure 4.1: Detail of the feeding tray and tube, illustrating the entry point for meat into the grinding mechanism.

4.3 Using the Reverse Function

The reverse function is useful for clearing blockages or processing tougher, fattier meats that might get stuck.

1. If the grinder jams or slows significantly, switch the unit OFF immediately.
2. Switch the unit to the "REV" (Reverse) position. This will cause the auger to rotate in the opposite direction, pushing the meat back out.
3. Once the blockage is cleared, switch the unit OFF, then back to the "ON" position to resume normal grinding.
4. If the blockage persists, unplug the unit, disassemble the grinding head, and manually clear the obstruction.

Figure 4.2: The control panel with the ON/OFF/Reverse switch, indicating the operational controls.

4.4 Making Sausages

To make sausages, replace the grinding plate and cutting blade with the appropriate sausage stuffing attachment.

1. After grinding your meat, disassemble the grinding plate and cutting blade.
2. Attach the desired sausage stuffing nozzle to the grinding head and secure it with the retaining ring.
3. Prestatu zure txistorra casing (natural or artificial) according to its instructions.
4. Irristatu casing onto the sausage nozzle, leaving a small overhang at the end.
5. Switch the unit ON and feed the seasoned ground meat into the feeding tube.
6. Gidatu c-aasing as it fills, ensuring even distribution and avoiding air pockets. Do not overfill.
7. Behin casing is filled, switch the unit OFF, remove the sausage, and twist or tie it into links.

5. Garbiketa eta Mantentze-lanak

Regular cleaning and proper maintenance will ensure the longevity and hygienic operation of your Buffalo CD400 Meat Grinder. Always unplug the unit before cleaning.

5.1 Garbiketa

1. Desmihiztatu: Unplug the unit. Disassemble the feeding tray, retaining ring, grinding plate, cutting blade, auger, and grinding head.
2. Hasierako garbiketa: Rinse all removable parts under warm running water to remove large meat residues.
3. Garbiketa: Wash all removable parts with warm, soapy water and a soft brush. Pay special attention to the holes in the grinding plates and the sharp edges of the blade.
4. Motor-etxebizitza: Garbitu motorren karkasa iragarkiarekinamp oihal. Never immerse the motor housing in water or spray it directly with water.
5. Lehortzea: Thoroughly dry all parts immediately after washing to prevent rust, especially for the cutting blade and grinding plates. Air drying is not recommended for these parts.
6. Lubrifikazioa: After drying, apply a thin layer of food-grade mineral oil to the cutting blade and grinding plates to protect them from corrosion.
7. Berriz muntatzea: Reassemble the unit once all parts are dry and lubricated.

5.2 Biltegiratzea

Store the meat grinder in a clean, dry place, away from direct sunlight and extreme temperatures. Keep all accessories together to prevent loss.

6. Arazoak

This section addresses common issues you might encounter with your Buffalo CD400 Meat Grinder.

7. Produktuaren zehaztapenak

Key technical specifications for the Buffalo CD400 Professional Meat Grinder.

Figure 7.1: Dimensional diagram of the Buffalo CD400 Meat Grinder.

8. Bermea eta bezeroarentzako laguntza

For warranty information and customer support, please refer to the documentation provided with your purchase or contact Buffalo customer service directly. Keep your proof of purchase for any warranty claims.

For technical assistance or spare parts inquiries, please contact your local Buffalo dealer or authorized service center. Information regarding spare parts availability may vary by region.