ARB R/Drawer R/Floor RDRF1355 Instruction Manual

1. Sarrera

This manual provides essential information for the safe and effective installation, operation, and maintenance of your ARB R/Drawer R/Floor RDRF1355 cargo management system. Please read these instructions thoroughly before proceeding with installation or use to ensure proper function and longevity of the product.

2. Segurtasun informazioa

Irakurri eta ulertu beti argibide guztiak instalatu eta erabili aurretik.
Ensure the unit is securely mounted to the vehicle's floor according to the installation guidelines to prevent movement during transit.
Do not exceed the maximum weight capacity of the drawer or the roller floor. Refer to the specifications section for details.
Secure all cargo within and on top of the drawer system to prevent shifting during vehicle movement, which could cause injury or damage.
Mantendu eskuak eta hatzak mugikorreko piezen aurka, batez ere tiradera irekitzean edo ixtean.
Regularly inspect the unit for any signs of wear, damage, or loose fasteners. Address any issues promptly.

3. Paketearen edukia

Verify that all components are present and undamaged before beginning installation. The package should contain:

ARB R/Drawer R/Floor RDRF1355 unit
Mounting hardware kit (bolts, washers, nuts, brackets)
Keys for drawer lock (if applicable)
Argibide eskuliburua (dokumentu hau)

Note: Specific contents may vary slightly. Contact your dealer if any parts are missing or damaged.

4. Konfigurazioa eta instalazioa

Proper installation is critical for the safety and performance of your ARB R/Drawer R/Floor system. It is recommended that installation be performed by a qualified technician if you are unsure of any steps.

Prepare Vehicle Cargo Area: Clear the vehicle's cargo area of any existing mats, liners, or obstructions. Ensure the surface is clean and dry.
Unitatea kokatu: Carefully place the ARB R/Drawer R/Floor unit into the desired position in the vehicle's cargo area. Ensure it is centered and aligned as required.
Markatu Muntatze Puntuak: Using the provided mounting brackets and the unit's base, mark the drilling locations on the vehicle's floor. Ensure no critical vehicle components (fuel lines, wiring, etc.) are beneath the drilling points.
Zulagailuak muntatzeko zuloak: Drill pilot holes and then the appropriate size holes as indicated in the mounting hardware instructions. Deburr any sharp edges.
Segurtatu unitatea: Attach the ARB R/Drawer R/Floor unit to the vehicle floor using the supplied mounting hardware. Tighten all bolts securely, but do not overtighten.
Azken Ikuskapena: Verify that the unit is firmly secured and does not move. Check that the drawer slides smoothly and locks correctly.

ARB R/Drawer R/Floor RDRF1355 installed in a vehicle's cargo area, with a portable fridge secured on top and a spare tire carrier visible. — This image illustrates the ARB R/Drawer R/Floor RDRF1355 system installed in the rear cargo area of a vehicle. The drawer unit is securely mounted, providing a stable platform. A portable refrigerator is shown strapped down to the top of the drawer system, demonstrating how cargo can be safely transported. A vehicle's rear spare tire carrier is also visible on the left.

5. Funtzionamendu-argibideak

Tiradera irekitzea: Locate the latch or handle on the front of the drawer. Engage the release mechanism and pull the drawer outwards until it fully extends.
Tiradera ixtea: Push the drawer firmly inwards until it is fully retracted and the latch engages, securing it in the closed position. Ensure it is properly latched before driving.
Blokeatzeko mekanismoa: If your unit includes a lock, use the provided key to secure the drawer in the closed position. This helps prevent unauthorized access and accidental opening.
Cargo Loading: Distribute weight evenly within the drawer and on the roller floor. Always secure items using tie-down points or cargo barriers to prevent movement during transit.
Pisu-gaitasuna: Adhere strictly to the specified weight limits for both the drawer and the top roller floor to prevent damage to the unit or vehicle.

6. Mantentzea

Regular maintenance will ensure the smooth operation and longevity of your ARB R/Drawer R/Floor system.

Garbiketa: Clean the drawer interior and exterior with a mild detergent and water. Avoid abrasive cleaners. Wipe down the roller slides to remove dirt and debris.
Lubrifikazioa: Periodically apply a silicone-based lubricant to the drawer runners and moving parts to ensure smooth operation. Do not use oil-based lubricants as they can attract dirt.
Ikuskapena: Regularly check all mounting bolts and fasteners for tightness. Inspect the drawer slides, latch mechanism, and overall structure for any signs of wear, damage, or corrosion.
Kalteak: If any damage is observed, discontinue use and contact ARB support or a qualified technician for repair.

7. Arazoak

Arazoa	Kausa posiblea	Irtenbidea
Drawer is difficult to open or close	Dirt/debris in runners, lack of lubrication, overloaded drawer, bent runner.	Clean runners, apply silicone lubricant, reduce load, inspect for damage.
Drawer does not latch securely	Obstruction, misaligned latch, damaged latch mechanism.	Clear obstruction, check alignment, inspect latch for damage.
Unit feels loose or rattles	Loose mounting bolts, unsecured cargo.	Tighten all mounting bolts, ensure all cargo is secured.

8. Zehaztapenak

Modelo zenbakia: RDRF1355
Marka: ARB
Fabrikatzailea: ARB
Elementuaren pisua: 121 kilo (gutxi gorabehera)
Produktuaren neurriak (kanpokoa): 55.51 x 21.65 x 14.57 hazbete (Luzera x Zabalera x Altuera)
Internal Drawer Dimensions (Approximate): 49 x 17 x 10 hazbete (Luzera x Zabalera x Altuera)
Materiala: Durable construction for off-road use

9. Bermea eta Laguntza

For warranty information, technical support, or to purchase replacement parts, please contact your authorized ARB dealer or visit the official ARB webgunea. Gorde erosketaren egiaztagiria bermearen erreklamazioetarako.

	ARB Summit Combar muntatzeko argibideak Toyota Tacoma 2016rako 2016ko Toyota Tacoma batean ARB Summit Combar babes-barra instalatzeko gida osoa. Urrats zehatzak, piezen zerrenda, beharrezko tresnak, segurtasun neurriak eta mantentze-lanetarako aholkuak barne hartzen ditu.
	ARB Berreskuratze Puntuko Muntaketa Argibideak Toyota LandCruiser Prado 150 eta FJ Cruiser-erako Toyota LandCruiser Prado 150 eta FJ Cruiser ibilgailuetarako diseinatutako ARB Berreskuratze Puntuen (2821020 eta 2821030 pieza zenbakiak) muntatzeko argibide zehatzak, fabrikako paraxokeen eta ARB babes-babesen prozedurak barne.
	ARB Berreskuratze Puntuko Muntaketa Argibideak Toyota LandCruiser Prado 150 eta FJ Cruiser-erako Toyota LandCruiser Prado 150 eta FJ Cruiser ibilgailuetarako diseinatutako ARB Berreskuratze Puntuen (2821020 LH, 2821030 RH pieza zenbakiak) muntatzeko argibide zehatzak, piezen zerrenda eta zaintzari buruzko informazioa, fabrikako paraxokekin edo ARB babes-barrekin bateragarriak.
	ARB RD09 Nissan H233Brako aireztapen bidezko blokeatzeko diferentziala: piezen zerrenda eta zehaztapenak Nissan H233B ardatzekin bateragarria den ARB RD09 airez operatutako blokeatzeko diferentzialaren piezen zerrenda zehatza, zehaztapenak eta diagrama lehertua. Pieza zenbakiak, datu teknikoak eta harremanetarako informazioa barne hartzen ditu.
	ARB 4x4 Osagarrien Ibilgailuen Aplikazio Gida - 2016ko martxoa Ezagutu ARB 4x4 Osagarrien Ibilgailuen Aplikazio Gida (2016ko martxoa), Toyota, Ford, Jeep, Nissan eta Chevrolet bezalako fabrikatzaileen ibilgailu sorta zabal baterako berreskuratze ekipamendu, argiztapen, txirrika eta gehiago zehaztuz.
	ARB 4480010 Harri-irristagailuen muntaketa-argibideak 2021eko Ford Broncorako ARB-ren 4480010 arroka-irristagailuak 2021eko Ford Bronco batean instalatzeko muntaketa-argibide ofizialak. Piezen zerrenda, beharrezko tresnak, segurtasun-oharrak eta urratsez urratseko instalazio-gida barne hartzen ditu.

ARB RDRF1355