Fluke 355 True RMS Clamp-Neurgailuaren erabiltzailearen eskuliburua

Sarrera

The Fluke 355 digital clamp-meter is a true RMS sensing, auto-ranging multimeter designed for precise measurement of current, voltage, frequency, and resistance in various electrical testing applications. It features a robust clamp mechanism for non-contact current measurement and a comprehensive set of functions for professional use, ensuring accurate readings for both linear and non-linear loads.

Segurtasun Informazioa

Always adhere to safety precautions when working with electrical equipment. This device is designed to meet IEC safety standard 61010-2-032.

• CAT IV, 600V: Suitable for measurements at the source of the low-voltage installation, such as electricity meters and primary over-current protection equipment.
• CAT III, 1,000V: Suitable for measurements within fixed installations, including switches and industrial equipment permanently connected to the fixed installation.

Ensure proper personal protective equipment (PPE) is used, and always follow local safety regulations when operating this device.

Kutxan dagoena

Your Fluke 355 Clamp-Meter package includes the following components:

• Fluke 355 digital clamp-metroa
• Proba berun multzoa
• Proba-zunda multzoa
• Alligator klip multzoa
• (6) AA bateriak
• Eramateko zorro leuna
• Erabiltzailearen eskuliburua

Image: All components included with the Fluke 355 Clamp-Meter, neatly arranged.

Produktuaren Ezaugarriak

• Egiazko RMS sentsazioa: Provides accurate readings for both linear and non-linear loads, regardless of waveform.
• Korronte Handiko Neurketa: Measures AC and DC current up to 2,000A (1,400A AC RMS).
• Masailezur-irekidura handia: 58mm (2.3 inches) jaw opening accommodates large or multiple conductors for non-contact current measurement.
• liburukiatage Neurketa: Neurriak AC voltage 600V eta DC boltage 1,000V arte.
• Frequency and Resistance: Measures frequency up to 1kHz and resistance up to 400kΩ.
• Inrush Current Function: Analyzes surge current during motor startup and other inductive loads for stable measurements.
• Behe-iragazkia: Reduces high-frequency interference for accurate measurements of complex waveforms.
• Min/Max funtzioa: Toggles to display lowest, highest, and average readings.
• Datuak gordetzea: Freezes the reading on the display for easy documentation in tight spaces.
• Jarraitasun-buzzlea: Confirms electrical continuity.
• Atzeko argiztatutako LCDa: Improves visibility in low-light conditions, with automatic backlight shut-off.
• Itzali automatikoa: Conserves battery life by automatically turning off after 20 minutes of non-use.
• Bateria baxuaren adierazlea: Signals when batteries need replacement.

Konfigurazioa

Bateriaren instalazioa

The Fluke 355 requires six 1.5V AA batteries for operation. These are typically included with your purchase.

1. Bilatu bateriaren konpartimentuaren estalkia gailuaren atzealdean.
2. Erabili bihurkin bat estalkia irekitzeko.
3. Insert the six AA batteries, ensuring correct polarity (+/-).
4. Jarri bateriaren konpartimentuaren estalkia eta ziurtatu.

Hasierako Ikuskapena

Before first use, inspect the clamp-meter, test leads, and accessories for any signs of damage. Do not use the device if any damage is observed.

Funtzionamendu-argibideak

Piztu/Itzaltzea

Turn the rotary switch to any measurement function to power on the device. Turn the rotary switch to "OFF" to power off. The device will automatically power off after 20 minutes of inactivity to conserve battery life.

Measuring AC/DC Current (Clamp Funtzioa)

1. Turn the rotary switch to the "A AC+DC" position.
2. Sakatu masailezurra askatzeko palanka itxiera irekitzeko.amp barailak.
3. Jarri clamp jaws around a single conductor. Ensure the jaws are fully closed.
4. Irakurri uneko balioa LCD pantailan.

Irudia: KLamp jaws of the Fluke 355 securely closed around an electrical conductor for current measurement.

Neurketa Boltage (AC/DC)

1. Connect the test leads to the appropriate input jacks (COM and V).
2. Turn the rotary switch to the "V AC+DC" position.
3. Konektatu proba-zundak neurtu beharreko zirkuituan edo osagaian.
4. Irakurri liburukiatagLCDaren balioa.

Measuring Resistance (Ω)

1. Connect the test leads to the appropriate input jacks (COM and Ω).
2. Biratu biraketa-etengailua "Ω" posiziora.
3. Ziurtatu zirkuitua deskonektatuta dagoela erresistentzia neurtu aurretik.
4. Konektatu proba-zundak neurtu beharreko osagaira.
5. Irakurri erresistentziaren balioa LCD pantailan.

Beste Funtzio batzuk

• GAMA: Manually select the measurement range if auto-ranging is not desired.
• EUTSI: Sakatu pantailan uneko irakurketa izozteko. Sakatu berriro askatzeko.
• ZERO: Used to zero out DC current readings or resistance readings for lead compensation.
• Hz: Measures frequency.
• INRUSH: Measures the peak current during motor startup.
• MIN MAX: Toggles through minimum, maximum, and average readings captured during a measurement session.
• Iragazkia: Activates a low-pass filter to reduce electrical noise for stable readings.

Irudia: Xehetasun handikoa view of the Fluke 355 Clamp-Meter's display and control panel.

Mantentzea

Garbiketa

Garbitu neurgailua casiniragarkiarekin gamp oihal eta detergente leun batekin. Ez erabili urratzailerik edo disolbatzailerik. Mantendu pantaila garbi eta lehor.

Bateria ordezkatzea

When the low-battery indicator appears on the display, replace all six AA batteries promptly to ensure accurate measurements. Follow the battery installation steps outlined in the Setup section.

Biltegiratzea

Gorde klamp-meter in its soft carrying case in a dry, dust-free environment when not in use. Remove batteries if storing for extended periods to prevent leakage.

Arazoak konpontzea

If the Fluke 355 Clamp-Meter is not functioning as expected, consider the following:

• Pantailarik/Energiarik ez: Check if the batteries are correctly installed and have sufficient charge. Replace batteries if necessary. Ensure the rotary switch is not in the "OFF" position.
• Irakurketa okerrak: Verify that the correct measurement function is selected. Ensure test leads are properly connected and not damaged. For current measurements, ensure the clamp masailezurrak eroale bakarraren inguruan guztiz itxita daude.
• Jarraitasun-buzzerrak ez du funtzionatzen: Ensure the device is in the continuity measurement mode and the circuit is de-energized.

For persistent issues, refer to the official Fluke support resources or contact customer service.

Zehaztapenak

Bermea eta Laguntza

Fluke Corporation provides high-quality testing tools. For warranty information, technical support, or service, please visit the official Fluke webwebgunean edo jarri harremanetan bere bezeroarentzako arreta zerbitzuarekin.

Informazio gehiago eta laguntza baliabideak aurki ditzakezu hemen: Fluke Store on Amazon.