Behringer Xenyx 1204USB Mixer User Manual

1. Sarrera

The Behringer Xenyx 1204USB is a versatile 12-input, 2/2-bus analog mixer designed for professional audio applications. It features premium Xenyx mic preamps, one-knob compressors, and a built-in USB audio interface, making it ideal for live sound, studio recording, and podcasting. This manual provides detailed instructions for setting up, operating, and maintaining your mixer to ensure optimal performance.

2. Zer dago kutxan

Upon unboxing your Behringer Xenyx 1204USB Mixer, please ensure all the following items are present:

• Behringer Xenyx 1204USB Mixer
• Elikatze-kablea
• Erabiltzailearen eskuliburua (dokumentu hau)
• USB kablea

3. Konfigurazio gida

Follow these steps to properly set up your Behringer Xenyx 1204USB Mixer.

3.1 Kokapen fisikoa

Place the mixer on a stable, flat surface away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the unit.

3.2 Energia-konexioa

Connect the supplied power cable to the mixer's power input on the rear panel and then to a suitable AC power outlet. Ensure the power switch is in the OFF position before connecting.

Figure 1: Rear panel connections including power input.

3.3 Mikrofonoak eta instrumentuak konektatzea

Nahastaileak sarrera aukera ugari eskaintzen ditu:

• XLR Inputs (Mic): Use balanced XLR cables for microphones. For condenser microphones requiring phantom power, ensure the +48V Phantom Power switch (located near the main output section) is engaged.
• 1/4" Line Inputs: Use 1/4" TS or TRS cables for line-level instruments (keyboards, guitars with preamps) or other audio devices.
• RCA Inputs (2-Track/USB): Connect external playback devices like CD players or media players using RCA cables to the 2-Track/USB Input.

2 Irudia: Gainetikview of input channels and control layout.

3.4 Connecting to a Computer (USB Interface)

Connect the mixer to your computer using the supplied USB cable. The mixer acts as a 2-in/2-out USB audio interface, allowing you to record audio from the mixer to your computer and play back audio from your computer through the mixer. No special drivers are typically required for most operating systems.

3.5 Irteerak konektatzea

• Irteera nagusiak: Connect these XLR outputs to your main PA system or studio monitors.
• ALT 3-4 Outputs: These 1/4" outputs provide an alternative stereo mix, useful for sending signals to a separate recording device or monitor mix.
• Control Room Out: Connect these 1/4" outputs to dedicated control room monitors.
• Telefonoak: Plug your headphones into the 1/4" Phones jack for monitoring.

4. Funtzionamendu-argibideak

Understanding the mixer's controls is key to achieving desired audio results.

4.1 Input Channel Controls (Channels 1-8)

• IRABAZIA: Adjusts the input sensitivity for each channel. Set this to achieve a strong signal without clipping (indicated by the CLIP LED).
• LOW CUT (75 Hz): Activates a high-pass filter to remove unwanted low-frequency rumble or hum.
• COMP (Compression): A one-knob compressor for dynamic range control. Turn clockwise to increase compression.
• EQ (Ekualizatzailea): Three-band equalizer for High (12 kHz), Mid (2.5 kHz), and Low (80 Hz) frequencies. Adjust to shape the tone of each channel.
• AUX 1 (MON PRE): Sends signal to the AUX 1 output, typically used for a pre-fader monitor mix.
• AUX 2 (FX POST): Sends signal to the AUX 2 output, typically used for a post-fader effects send.
• PAN/BAL: Pans mono signals left/right in the stereo field or balances stereo signals.
• MUTE/ALT 3-4: Mutes the channel from the Main Mix and routes it to the ALT 3-4 outputs.
• Kanalen desagertzaileak: Controls the individual volume level of each channel in the Main Mix.

3. irudia: Xehetasuna view of channel strips and their respective controls.

4.2 Atal Nagusiko Kontrolak

• AUX SENDS: Master level controls for AUX 1 and AUX 2 outputs.
• STEREO AUX RETURNS: Controls the level of incoming stereo signals from external effects processors connected to the AUX Returns.
• 2-TR/USB TO MAIN/PHONES: Routes the 2-Track/USB input signal to the Main Mix or Phones/Control Room output.
• TELEFONOA/CTRL GELA: Adjusts the volume for headphones and control room monitors.
• MAIN MIX Faders: Controls the overall output volume of the main stereo mix.
• ALT 3-4 Faders: Controls the overall output volume of the ALT 3-4 stereo mix.
• Maila-neurgailuak: LED meters display the output level of the Main Mix, helping to prevent clipping.

5. Mantentzea

Mantentze egokiak zure nahasgailuaren iraupena eta errendimendu optimoa bermatzen ditu.

• Garbiketa: Use a soft, dry cloth to clean the exterior of the mixer. Avoid abrasive cleaners or solvents. For dust accumulation around knobs and faders, use compressed air.
• Biltegiratzea: When not in use, store the mixer in a cool, dry place, ideally covered to protect from dust.
• Kableen kudeaketa: Ziurtatu kableak txukun antolatuta daudela eta ez daudela tentsiopean konektoreak eta atakak kaltetu ez daitezen.

6. Arazoak

Arazoak badituzu, saiatu arazoak konpontzeko ohiko urrats hauekin:

• Soinu-irteerarik ez:
  • Check all power connections and ensure the mixer is powered on.
  • Verify that channel faders, Main Mix faders, and Phones/Control Room knob are turned up.
  • Ensure input sources are connected correctly and are active.
  • Check if any MUTE buttons are engaged on active channels.
  • Confirm output cables are securely connected to monitors/PA system.
• Soinu distortsionatua:
  • Reduce the GAIN knob on the input channel.
  • Check if the CLIP LED is constantly lit; if so, reduce input gain.
  • Lower the Main Mix faders or the volume on your connected speakers.
• Burrunba edo zarata:
  • Ziurtatu kable guztiak behar bezala blindatu eta konektatuta daudela.
  • Use balanced cables (XLR or TRS) whenever possible.
  • Check for ground loops; try connecting all audio equipment to the same power strip.
  • Engage the LOW CUT filter on channels with potential low-frequency noise.

7. Zehaztapenak

8. Bermea eta Laguntza

The Behringer Xenyx 1204USB Mixer comes with a standard manufacturer's warranty. For detailed warranty information, product registration, or technical support, please visit the official Behringer webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzura. Gorde erosketa-agiria berme-erreklamazioetarako.

Baliabide gehiago lortzeko, jo dezakezu ofizialki Erabiltzailearen eskuliburua (PDF) provided by Behringer.