1. Sarrera
Thank you for choosing the Benro S4 S-Series Video Head. This instruction manual provides essential information for the safe and effective use of your video head. The Benro S4 is designed for compact and lightweight camera setups, offering smooth and precise camera movements for professional video capture. Please read this manual thoroughly before use and retain it for future reference.
2. Segurtasun informazioa
- Always ensure the video head is securely mounted to a stable tripod or support system before attaching any camera equipment.
- Do not exceed the maximum load capacity of 8.8 lbs (4 kg) for the S4 video head. Overloading can cause damage to the equipment and potential injury.
- Ensure all locks are engaged when transporting the video head or when the camera is unattended.
- Avoid exposing the video head to extreme temperatures, moisture, or corrosive substances.
- Mantendu haurren eskura.
3. Paketearen edukia
Egiaztatu elementu guztiak zure paketean daudela:
- Benro S4 Video Head
- Azkar askatzeko plaka
- Pan Barra Heldulekua
- Argibide eskuliburua (dokumentu hau)
3.1. irudia: The Benro S4 Video Head shown with its quick release plate and pan bar handle. This image illustrates the main components included in the package.
4. Konfigurazioa
4.1 Bideo-burua tripode bati lotzea
- Ensure your tripod is stable and capable of supporting the combined weight of the S4 head and your camera equipment.
- Locate the 3/8"-16 threaded mounting hole on the base of the S4 video head.
- Screw the video head onto the tripod's mounting screw until it is firmly secured. Some tripods may require an adapter from 1/4"-20 to 3/8"-16.
- Tighten any locking mechanisms on your tripod to prevent the head from rotating unintentionally.
4.1. irudia: The Benro S4 Video Head securely attached to a tripod. This demonstrates the typical setup for mounting the head onto a stable support.
4.2 Kamera muntatzea
- Attach the quick release plate to the bottom of your camera using the 1/4"-20 or 3/8"-16 screw. Ensure it is tightened securely to prevent rotation.
- Unlock the quick release plate clamp on the video head by pulling the blue lever.
- Sartu kamera erantsitako askapen azkarreko plakarekin giltza barruan.amp on the video head.
- Push the blue lever back to lock the quick release plate securely in place. Verify the camera is firmly attached before releasinzure heldulekua eutsi.
4.3 Balancing the Camera
Proper camera balance is crucial for smooth operation and effective counterbalance. The S4 features a sliding quick release plate for precise balancing.
- With the camera mounted, slightly loosen the quick release plate clamp (if your camera is heavy, support it with one hand).
- Slide the camera forwards or backwards on the quick release plate until the camera remains level when the tilt lock is disengaged.
- Once balanced, securely tighten the quick release plate clamp.
5. Funtzionamendua
5.1 Pan and Tilt Adjustments
- Pan Lock: The knob located at the base of the head controls the 360-degree panning rotation. Loosen to pan, tighten to lock.
- Okertu blokeoa: The larger knob on the side of the head controls the vertical tilt movement. Loosen to tilt, tighten to lock.
5.1. irudia: Gertu bat view of the Benro S4 Video Head, highlighting the pan and tilt locking mechanisms and the pan bar attachment point.
5.2 Drag Control
The S4 video head features adjustable drag for both pan and tilt movements, allowing for smooth and controlled camera operation. The drag control knobs are typically integrated with the pan and tilt lock knobs or located nearby. Adjust these to achieve your desired level of resistance for fluid motion.
5.3 Pan Bar Handle
Attach the pan bar handle to the designated port on the side of the video head. This handle provides leverage for precise and smooth panning and tilting movements. The angle of the pan bar can often be adjusted for user comfort.
6. Mantentzea
- Garbiketa: Use a soft, dry cloth to wipe down the video head after each use. For stubborn dirt, a slightly damp oihal bat erabil daiteke, eta berehala lehortu ondoren. Saihestu produktu kimiko gogorrak edo material urratzaileak.
- Biltegiratzea: Store the video head in a clean, dry environment, away from direct sunlight and extreme temperatures.
- Ikuskapena: Periodically check all screws and connections to ensure they are tight. Do not attempt to disassemble the fluid head mechanism.
7. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Camera not stable on head. | Quick release plate not fully locked or improperly attached to camera. | Ensure the quick release plate is securely fastened to the camera and the blue lever on the head is fully engaged. |
| Jerky pan/tilt movements. | Drag settings too tight or too loose; camera not balanced. | Adjust pan and tilt drag controls. Re-balance the camera on the quick release plate. |
| Head feels stiff or difficult to move. | Locks are engaged; cold temperatures affecting fluid. | Disengage pan and tilt locks. Allow the head to warm up in cold conditions. |
8. Zehaztapenak
- Eredua: S4
- Marka: Benro
- Produktuaren neurriak: 3.9 x 3 x 3 hazbete (9.9 x 7.6 x 7.6 cm)
- Elementuaren pisua: 1.54 libra (0.7 kg)
- Pisu muga: 8.8 libra (4 kg)
- Materiala: Magnesio aleazioa
- Tripode buru mota: Pan Buruak
- Ezaugarri berezia: Biratugarria, erregulagarria
- Gailu bateragarriak: Kamera
- Kolorea: Beltza
- Lehenengo eskuragarri: 26ko irailaren 2012a
9. Bermea eta laguntza
The Benro S4 Video Head comes with a Urtebeteko bermea mugatua. For warranty claims, technical support, or service inquiries, please contact Benro customer service or visit the official Benro website. Retain your proof of purchase for warranty validation.
You can find more information and register your product on the Benro Store.
