Sarrera
The Behringer UltraBass BXD3000H is an ultra-compact 300-Watt 2-channel bass amplifier head designed for powerful and versatile bass amplification. It features revolutionary Class-D amplifier technology, delivering enormous power and incredible sonic performance in a lightweight package. This manual provides essential information for setting up, operating, and maintaining your BXD3000H.
Segurtasun-argibide garrantzitsuak
- Irakurri argibide hauek.
- Jarrai argibide hauek.
- Kontuan izan abisu guztiei.
- Jarraitu argibide guztiak.
- Ez erabili aparatu hau uraren ondoan.
- Garbitu zapi lehorrekin bakarrik.
- Ez blokeatu aireztapen-zulorik. Instalatu fabrikatzailearen argibideen arabera.
- Ez instalatu bero-iturri inongo ondoan, esate baterako, erradiadoreak, bero-erregistroak, sukaldeak edo beste aparatu batzuk (barne ampberoa sortzen duten argitzaileak).
- Ez zapaldu polarizatutako edo lurreko entxufearen segurtasun-helburua. Entxufe polarizatu batek bi pala ditu, bata bestea baino zabalagoa dutenak. Lurreratze motako entxufe batek bi pala eta lurreko hirugarren ahoa ditu. Pala zabala edo hirugarren ahoa zure segurtasunerako eskaintzen dira. Emandako entxufea zure entxufean sartzen ez bada, kontsultatu elektrizista bati zaharkitutako entxufea ordezkatzeko.
- Babestu korronte-kablea entxufeetan, erosotasun-harguneetan eta aparatutik irteten den puntuan ibiltzetik edo atzamarra ez dadin.
- Erabili soilik fabrikatzaileak zehaztutako eranskinak/osagarriak.
- Erabili fabrikatzaileak zehaztutako edo aparatuarekin saltzen den saskiarekin, euskarria, tripodea, euskarria edo mahaiarekin soilik. Orga bat erabiltzen denean, kontuz ibili saskia/aparatuaren konbinazioa mugitzean, iraultzeagatik zauririk ez izateko.
- Deskonektatu aparatu hau tximista-ekaitzetan edo denbora luzez erabiltzen ez duzunean.
- Jarri zerbitzu-zerbitzu guztiak zerbitzu-pertsonal kualifikatuari. Zerbitzua behar da aparatua edozein modutan hondatu denean, hala nola, elikatze-kablea edo entxufea hondatuta dagoenean, likidoa isuri denean edo objektuak aparatura erori direnean, aparatua euria edo hezetasuna jasan duenean, ez du normalean funtzionatzen. , edo erori egin da.
Ezaugarriak
- D-Klase Iraultzailea amplifier technology: enormous power, incredible sonic performance and ultra-lightweight.
- Clean channel with dedicated gain control.
- Distortion channel with dedicated gain, shape and level controls.
- Switchable Ultrabass subharmonics processor for incredible low-end power.
- Integrated compressor for smooth out volume peaks and deliver punchy bass.
- Ultra-musical 7-band graphic EQ with FBQ Spectrum Analyzer for instant sound shaping.
- Dedicated headphone output for silent practice.
- Balanced XLR DI output for direct connection to a mixing console.
- FX Insert for external effects devices.
- Dual footswitch for channel selection and Ultrabass function included.
Konfigurazioa
Before powering on your BXD3000H, ensure all connections are secure and correct. This section guides you through the initial setup process.
Potentziara konektatzen
Connect the supplied power cord to the AC input on the rear panel of the amplifier and then to a suitable wall outlet. Ensure the power switch on the front panel is in the OFF position before connecting to power.
Zure tresna konektatzea
Plug your bass guitar or other compatible instrument into the SARRERA jack on the front panel using a standard 1/4-inch instrument cable. The BXD3000H is compatible with various bass types, including double bass, via its XLR connector type.
Connecting to a Speaker Cabinet
Konektatu amplifier's speaker output to your bass speaker cabinet using a high-quality speaker cable. Ensure the impedance of your speaker cabinet matches the amplifier's output requirements. Refer to your speaker cabinet's manual for impedance information.
Oin-etengailuaren konexioa
Connect the included dual footswitch to the dedicated footswitch input on the rear panel. This allows for convenient switching between channels and activating the Ultrabass function during performance.
Figure 1: Front Panel Layout of the BXD3000H. This image displays the input, gain controls, equalizer, compressor, Ultrabass, master volume, and headphone jack.
2. irudia: Angeludun View of the BXD3000H. This image provides a perspective view ren ampbizitzailea, erakustaldiaasing its overall design and compact form factor.
Funtzionamendu-argibideak
The BXD3000H offers a range of controls to shape your bass tone. Familiarize yourself with each control to achieve your desired sound.
Piztu/Itzaltzea
- To power on, ensure all volume controls are set to minimum, then press the BOTEREA aldatu ON posiziora.
- To power off, set all volume controls to minimum, then press the BOTEREA aldatu OFF posiziora.
Kanalaren funtzionamendua
The BXD3000H features two distinct channels:
- Kanala garbia: Erabili IRABAZIA 1 control to adjust the input sensitivity for a clean, uncolored bass tone.
- Distortion Channel: Activate this channel for a powerful, overdriven bass sound. Use IRABAZIA 2 to control the amount of distortion, FORMA to sculpt the mid-range character, and MAILA to set the output volume of the distortion channel.
- Switch between channels using the dedicated button on the front panel or the included footswitch.
FBQ Equalizer
The 7-band graphic equalizer allows for precise tone shaping. Adjust the sliders to boost or cut specific frequencies (63 Hz, 160 Hz, 315 Hz, 630 Hz, 1.6 kHz, 2.5 kHz, 5 kHz). The FBQ Spectrum Analyzer function provides visual feedback on frequency content, helping you identify and eliminate feedback.
Konpresorea
The integrated compressor smooths out volume peaks and adds sustain to your bass notes. Adjust the KONPRESOREA knob to control the amount of compression applied to your signal.
Ultrabass
Inplikatu ULTRABASSOA function to add a subharmonics processor, generating an octave below your played notes for an incredibly deep and powerful low-end. Use the dedicated knob to blend the effect into your signal. This feature can also be toggled via the footswitch.
Master Volume and Headphones
- MAISU: Irteera bolumen orokorra kontrolatzen du ampbiziagoa.
- TELEFONOAK: Connect headphones to this jack for silent practice. The headphone volume is independent of the master volume.
DI Output and FX Loop
- IRTEERA: The balanced XLR DI output allows for direct connection to a mixing console or recording interface, providing a clean signal for live sound or studio recording.
- FX txertatzea: Use the FX Insert jacks to connect external effects processors (e.g., pedals, rack units) into your signal chain.
Mantentzea
Proper maintenance ensures the longevity and optimal performance of your BXD3000H.
- Garbiketa: Deskonektatu amplifier from power before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use liquid cleaners or solvents.
- Aireztapena: Ensure that the ventilation openings are not blocked. Adequate airflow is crucial to prevent overheating.
- Biltegiratzea: Denbora luzez erabiltzen ez denean, gorde amplifizer-a leku fresko eta lehor batean, eguzki-argitik eta muturreko tenperaturetatik urrun.
- Garraioa: When transporting the unit, use appropriate protective cases to prevent physical damage.
Arazoak konpontzea
This section addresses common issues you might encounter with your BXD3000H.
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Ez dago soinu irteerarik. | Power not connected, master volume too low, speaker cable disconnected, instrument cable faulty, instrument volume off. | Check power connection, increase master volume, ensure speaker and instrument cables are securely connected and functional. Check instrument volume. |
| Distorted or weak sound. | Input gain too high/low, speaker impedance mismatch, faulty cables, damaged speaker. | Adjust input gain (GAIN 1/GAIN 2), ensure speaker impedance matches, try different cables, inspect speaker for damage. |
| Haizagailuaren zarata nabaria da. | Normal operation, restricted airflow. | A certain level of fan noise is normal for cooling. Ensure ventilation openings are clear and not obstructed. |
| Footswitch not working. | Footswitch cable disconnected or faulty, footswitch itself is damaged. | Ensure footswitch cable is securely connected. Test with another compatible footswitch if available. |
Irtenbide hauek saiatu ondoren arazoa konpontzen ez bada, jarri harremanetan Behringer bezeroarentzako arreta-zerbitzuarekin edo zerbitzu-teknikari kualifikatu batekin.
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Eredua | BXD3000H |
| Irteera Wattage | 300 Watt |
| Elementuaren pisua | 7.7 libra (gutxi gorabehera 3.5 kg) |
| Produktuaren neurriak (L x W x H) | 8.86" x 17.72" x 4.61" (22.5 cm x 45 cm x 11.7 cm) |
| Energia iturria | Kable elektrikoa |
| Konektore mota | XLR (for DI Out) |
| Gailu bateragarriak | Bass Guitar, Double Bass |
| Kanalak | 2 (Clean, Distortion) |
| Berdinketa | 7-band graphic EQ with FBQ Spectrum Analyzer |
| Ezaugarri bereziak | Ultrabass subharmonics processor, Compressor, Headphone output, DI output, FX Insert |
Bermea eta Laguntza
Bermeari buruzko informazio zehatza eta laguntza teknikoa lortzeko, jo Behringer-en webgune ofizialera. webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Gorde erosketa-agiria erosketaren frogagiri gisa, berme-erreklamazioetarako.
Lineako baliabideak eta harremanetarako informazioa normalean hemen aurki daitezke: www.behringer.com.
