Testo 0560 8312 830-T1 IR termometroaren instrukzio eskuliburua

1. Sarrera

This manual provides essential instructions for the safe and effective use of the Testo 0560 8312 830-T1 IR Thermometer. This device is designed for non-contact measurement of surface temperatures in various industrial and trade applications. It features 12:1 optics and a dual laser for precise targeting, allowing for accurate temperature readings even on smaller objects from a safe distance.

2. Segurtasun informazioa

Please read this section carefully before operating the device to ensure safe and proper use.

• Do not point the laser directly into eyes or at other people.
• Ez erabili gailua atmosfera lehergarrietan.
• Protect the device from extreme temperatures, impacts, and strong vibrations.
• Mantendu gailua garbi eta lehorra.
• Erabili gailua bere helbururako soilik, eskuliburu honetan deskribatzen den bezala.
• Konponketak baimendutako langileek bakarrik egin behar dituzte.

3. Produktua amaitu daview

The Testo 830-T1 IR Thermometer is a handheld device designed for quick and accurate non-contact temperature measurements.

Figure 1: Testo 830-T1 Infrared Thermometer with included battery.

2. irudia: Aurrealdea view of the Testo 830-T1, showing the display, measurement trigger, and control buttons.

3.1 Osagaiak

• Sentsore infragorria: Located at the front of the device, used for non-contact temperature measurement.
• Laser erakusle bikoitzak: Two laser dots indicate the measurement spot size.
• Pantaila: Shows temperature readings, measurement units, battery status, and other indicators.
• Neurketa-abiarazlea: Neurketa eta laserra aktibatzen ditu.
• Kontrol-botoiak: For navigating menus, adjusting settings (e.g., emissivity, units), and accessing functions like MIN/MAX.
• Bateriaren konpartimendua: Bateria instalatzeko heldulekuan kokatuta.

4. Konfigurazioa

4.1 Bateriaren instalazioa

1. Aurkitu bateriaren konpartimentuaren estalkia termometroaren heldulekuan.
2. Ireki estalkia.
3. Insert two AAA batteries, ensuring correct polarity (+/-). The device requires 2 AAA batteries, which are included.
4. Itxi bateriaren konpartimenduaren estalkia ondo.

4.2 Hasierako piztea eta unitatearen hautaketa

Upon first use or after battery replacement, the device will power on. You may need to select your preferred temperature unit (Celsius or Fahrenheit).

• To change units: Typically, this involves pressing and holding a specific button (often the 'Mode' or 'Set' button, or an arrow button) while the device is off, then powering it on, or accessing a menu option. Refer to the on-screen prompts or the official Testo documentation for the exact procedure for your specific device firmware, as methods can vary.

5. Funtzionamendu-argibideak

5.1 Neurketa bat egitea

1. Zuzendu infragorri sentsorea helburuko objekturantz.
2. Press and hold the measurement trigger. The dual laser pointers will activate, indicating the measurement spot.
3. Tenperaturaren irakurketa pantailan agertuko da.
4. Release the trigger to hold the last measured value (HOLD function).

Figure 3: The Testo 830-T1 in use, measuring the surface temperature of a radiator.

5.2 Understanding 12:1 Optics and Dual Laser

The 12:1 optics mean that at a distance of 12 inches, the measurement spot diameter is 1 inch. The dual laser pointers converge at the center of this measurement spot, helping you accurately identify the area being measured. This is particularly useful for measuring smaller objects or from a greater distance.

5.3 MIN/MAX funtzioa

The device can display the minimum and maximum temperatures recorded during a continuous measurement. This function is useful for monitoring temperature fluctuations over a period.

• To activate MIN/MAX: Press the appropriate button (refer to your device's specific button layout, often an arrow or 'Mode' button) while taking a measurement. The display will cycle through current, minimum, and maximum values.

5.4 Emisibitatearen doikuntza

Emissivity is a measure of an object's ability to emit infrared energy. Different materials have different emissivities. For accurate readings, adjust the emissivity setting on your thermometer to match the material being measured. Common emissivity values:

• 0.95 (default for many devices): Most organic materials, painted surfaces, water, plastic.
• 0.85-0.90: Concrete, brick, rough wood.
• 0.60-0.70: Polished metals (can vary significantly).

Consult an emissivity table for specific materials. Incorrect emissivity settings will lead to inaccurate temperature readings.

6. Mantentzea

6.1 Garbiketa

To ensure optimal performance and longevity, keep the device clean.

• Wipe the device exterior with a clean, damp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Carefully clean the infrared lens with a soft, lint-free cloth or a lens cleaning wipe. Avoid scratching the lens.

6.2 Bateria ordezkatzea

When the battery indicator on the display shows low power, replace the batteries promptly to avoid interruption of operation. Follow the battery installation steps in Section 4.1.

6.3 Biltegiratzea

Store the thermometer in a dry, dust-free environment within the recommended temperature range (refer to specifications). If storing for extended periods, remove the batteries to prevent leakage.

7. Arazoak

If you encounter issues with your Testo 830-T1, refer to the following common problems and solutions:

• Gailua ez da pizten:
  • Check if batteries are correctly inserted with proper polarity.
  • Ordeztu bateriak berriekin.
• Irakurketa zehaztugabeak:
  • Ensure the infrared lens is clean.
  • Egiaztatu emisibitatearen ezarpena helburuko materialarekin bat datorrela.
  • Ensure the measurement distance is appropriate for the target size (12:1 optics).
  • Avoid measuring through glass or highly reflective surfaces.
• Laserra ez da ikusten:
  • Egiaztatu bateriaren maila.
  • Ensure the measurement trigger is pressed.

If problems persist, contact Testo customer support for assistance.

8. Zehaztapenak

9. Bermea eta Laguntza

For warranty information, technical support, or service inquiries, please contact Testo SE & Co. directly. Details regarding specific warranty periods and terms are typically provided with the product packaging or on the manufacturer's official webgunea.

Fabrikatzailea: Testo SE & Co.

Mesedez, gorde zure erosketa-froga berme-erreklamazioetarako.