1. Sarrera
This instruction manual provides essential information for the proper installation, maintenance, and troubleshooting of the Candy 92130871 washing machine replacement belt. Please read this manual thoroughly before attempting any installation or repair to ensure safe and effective operation.
2. Segurtasun informazioa
- Deskonektatu beti garbigailua korronte-iturritik before attempting any installation, maintenance, or repair work. Failure to do so can result in electric shock or serious injury.
- Erabili babes pertsonaleko ekipamendu egokia, hala nola eskularruak, lesioak saihesteko.
- Urrats baten inguruan ziur ez bazaude, kontsultatu teknikari kualifikatu bati.
- Keep children and pets away from the appliance during repair.
- Ensure all tools are in good condition and used correctly.
3. Produktua amaitu daview
The Candy 92130871 is an authentic replacement drive belt designed for various Candy washing machine models. This belt is crucial for transmitting power from the motor to the drum, enabling the washing machine to operate correctly.
Image 1: The Candy 92130871 washing machine replacement belt. This image shows the black rubber belt, typically ribbed on one side for grip.
4. Bateragarritasuna
This replacement belt (Manufacturer Code: 92130871) is compatible with a wide range of Candy washing machine models. Please verify your washing machine's model number against the list below to ensure proper fitment.
Compatible Models include:
- CANDY AC16, ACTIVA50, ACTIVA51, ACTIVA60, ACTIVA61, ACTIVA64SLIM, ACTIVA66SL, ACTIVA6CI
- ALISE060, ALISE065, ALISE066, ALISE'160XT, ALISE190X, ALISE6190X0, ALISE'.610B, ALISE'65 ARG, ALISE'650, ALISE'696
- AQUAV.6, AQUAVIVA60, AQUAVIVA63, AQUAVIVA650, AQUAVIVA66
- C36ZXT, C532, C535T, C536T, C55XT (I), C564XT plata, C577T, C588XT, C58XT (I), C6077T, XT AQUAM, CM.608XT (I)
- C616XT (I), C625XT, C634XT, C634XT (CE), C634XT (NORD), C636XT, C647XT (I), C657XT (I)
- CB52T, CB52TCKD, CB53XTR, CB612XT, CB613TR, CB623XTTR HC, CB62T, CB62TR, CB633XTR, CB634XT, CB63TES, CB63TR, CB63TRCKD, CB63XTR
- CE520T, CE530, CE615, CE621T, CE623R, CE625TR, CE629T, CE637XT, CE650TR
- CG5444T, CG5544T, CG623T, CG644.3T, CG644T, CG654XT, CGAQ665XT
- CH630, CHIARA51XT, CHIARA540XTR, CHIARA552TR, CHIARA55XTR, CHIARA5XT, CHIARA5XTV, CHIARA642XTR, CHIARA65XTR, CHIARA65XT, CHIARA65XTV, CHIARA65XTR, CHIARA65X2XTR, CHIARA6XT
- CI50XTR, CI537T, CI57TR, CI589XT, CI60XTR, CI60XTR H/C, CI620TP, CI622T, CI624T, CI626XT, CI627T, CI637T, CI648XT, CI658XT
- CJ6514, CJ543T, CJ613XT, CJ643T, CJA52T
- CL66XT, CN50T, CN50T-04S, CN60T, CN63T, CN63T CI, CN63TCKD, CN63TRU-03S
- IPC 610, CR61, CS47XT (I), CSB640XTR, CSE640XTR, CSE615XT, CM.SE635XT, CSG624T, CSI615T, CSI635XTR, CSI635XTRSY, CSN62T, CSN62T-03S
- EXCL.S641XTR, EXCLUS.60, EXCLUS.6000, EXCLUS540XTR, EXCLUS65XTR
- HOL165XTR, HOL62, VACANZAS 6, HOLIDAY161, HOLIDAY60, HOLIDAY603, HOLIDAY61
- ICL60T, LADYC.623CKD, SEL.S643XTR, SELEC 0.631 XTR, SELECTA600, SELECTA60X, SELECTA61XXTR
- SL5000EXC, SL50EXCLUS., SLIM644AQUAV, SLIMMY508XT, SLIMMY634XT, SLIMMY655XT, SLIMMY6AQUAV, SLIMMYCB62XT, WM601.
5. Instalazioa (Konfigurazioa)
Replacing a washing machine drive belt requires careful attention. Follow these general steps. Specific machine designs may vary, so refer to your washing machine's primary service manual if available.
- Prestaketa:
- Deskonektatu garbigailua korronte-iturri nagusitik.
- Itzali makinaren ur-hornidura.
- Pull the washing machine away from the wall to access the rear panel.
- Gerrikora sartzeko:
- Locate and remove the screws securing the rear access panel of the washing machine.
- Carefully remove the panel to expose the motor, drum pulley, and the old belt (if still present).
- Gerriko zaharra kendu:
- If the old belt is still partially attached, carefully pry it off the motor pulley and then the larger drum pulley. Note its orientation.
- Gerriko berria instalatu:
- First, loop the new Candy 92130871 belt around the smaller motor pulley.
- Next, partially loop the belt around the larger drum pulley.
- While holding the belt firmly on the motor pulley and partially on the drum pulley, slowly rotate the drum pulley by hand. The belt should gradually roll onto the drum pulley until it is fully seated. Ensure the ribbed side of the belt (if applicable) faces the pulleys correctly.
- Check that the belt is centered on both pulleys and has proper tension. It should be snug but allow for a small amount of flex.
- Berriz muntatu:
- Replace the rear access panel and secure it with the screws.
- Push the washing machine back into its position.
- Reconnect the power supply and water supply.
- Proba:
- Run a short, empty wash cycle to ensure the belt operates smoothly and quietly.
6. Mantentzea
Regular inspection of the drive belt can help prevent future issues and extend the life of your washing machine.
- Aldizkako ikuskapena: Every 1-2 years, or if you notice unusual noises or performance issues, inspect the belt for signs of wear, cracking, fraying, or stretching.
- Tentsio egokia: Ensure the belt maintains proper tension. A loose belt can slip, causing the drum to not spin or spin intermittently. An overly tight belt can put undue stress on the motor and drum bearings.
- Garbitasuna: Keep the area around the motor and pulleys free from lint, debris, and moisture, which can affect belt performance and lifespan.
7. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Danborra ez da biratzen edo poliki biratzen da | Broken, stretched, or slipped drive belt. | Inspect the belt. Replace if broken or severely worn. Re-seat if slipped. |
| Loud squealing or grinding noise during spin cycle | Worn or misaligned drive belt. | Check belt for wear and proper alignment on pulleys. Replace if worn. |
| Erre usaina | Belt slipping due to improper tension or excessive load. | Check belt tension and ensure it's not overloaded. Replace if damaged from slipping. |
If troubleshooting steps do not resolve the issue, it is recommended to contact a qualified appliance technician.
8. Zehaztapenak
- Marka: Gozokiak
- Modelo zenbakia: 92130871
- Produktu mota: Washing Machine Replacement Belt
- Gailu bateragarriak: Garbigailua
- Paketearen neurriak: 30 x 20 x 3 cm (gutxi gorabehera)
- Produktuaren pisua: 100 g (gutxi gorabehera)
9. Bermea eta Laguntza
For information regarding warranty coverage, technical support, or to purchase additional parts, please refer to the official Candy webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Gorde erosketa-agiria erosketaren frogagiri gisa.
Official Candy Webgunea: www.candy-group.com