Sarrera
The Kestrel 3500 Pocket Weather Meter is a robust and portable device designed to provide accurate environmental measurements. It is ideal for a variety of applications including outdoor sports, agriculture, research, and industrial use. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Kestrel 3500.

Image: The Kestrel 3500 Pocket Weather Meter, a compact yellow device. It features a rotating impeller at the top for wind speed measurement, a clear digital display in the center showing numerical readings, and three control buttons (left arrow, center select, right arrow) positioned below the screen for navigation and settings adjustment. The model number '3500' is visible on the right side of the display.
Konfigurazioa
Bateriaren instalazioa
- Bilatu bateriaren konpartimentua unitatearen atzealdean.
- Using a coin, twist the battery compartment cover counter-clockwise to open.
- Insert the supplied AAA battery, ensuring the positive (+) end faces the correct direction as indicated inside the compartment.
- Replace the cover and twist clockwise to secure it. Do not overtighten.
Hasierako piztea
- Press and hold the center button (O) for approximately 2 seconds to power on the device.
- The display will illuminate and show the current measurement mode.
Funtzionamendua
Nabigazio moduak
- Use the left (◀) eta eskuineko (▶) arrow buttons to cycle through the available measurement modes.
- Available modes typically include: Wind Speed (current, average, max gust), Temperature, Relative Humidity, Barometric Pressure, Altitude, and Dew Point.
Neurketak hartzea
- Haizearen abiadura: Point the back of the unit into the wind, allowing the impeller to rotate freely. The display will show the current wind speed.
- Tenperatura/Hezetasuna: Ensure the sensors are exposed to the ambient air. Avoid direct sunlight or holding the unit for extended periods, as body heat can affect readings.
- Barometric Pressure/Altitude: For accurate altitude readings, calibrate the unit to a known reference altitude or pressure. Refer to the calibration section in the full manual for detailed steps.
Unitatearen hautaketa
- To change measurement units (e.g., mph to km/h, °F to °C), navigate to the desired measurement mode.
- Press and hold the center button (O) for 2 seconds. The unit will flash.
- Use the arrow buttons to select the desired unit.
- Sakatu erdiko botoia (O) again to confirm your selection.
Mantentzea
Garbiketa
- Garbitu unitatearen kanpoaldea leun batekin, damp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
- For the impeller, gently blow air through it to remove dust or debris. Avoid using compressed air directly on the bearings.
Bateria ordezkatzea
- When the low battery indicator appears on the display, replace the AAA battery promptly.
- Jarraitu Konfigurazio atalean azaldutako bateria instalatzeko urratsak.
Biltegiratzea
- Store the Kestrel 3500 in a cool, dry place away from direct sunlight and extreme temperatures.
- Denbora luzez gordetzen baduzu, kendu bateria isuriak saihesteko.
Arazoak konpontzea
- Unitatea ez da pizten: Egiaztatu bateriaren instalazioa eta ziurtatu bateria berria dela.
- Irakurketa zehaztugabeak: Ensure sensors are clean and unobstructed. Allow the unit to acclimate to the environment for a few minutes before taking readings. For wind speed, ensure the impeller is spinning freely.
- Pantaila hutsik edo izoztuta dago: Remove and reinsert the battery to perform a soft reset. If the issue persists, contact customer support.
Zehaztapenak
- Neurriak: Gutxi gorabehera 4.8 x 1.7 x 1.1 hazbete (122 x 42 x 28 mm)
- Pisua: Approximately 2.3 ounces (65 grams) with battery
- Potentzia: 1 x AAA bateria (barne)
- Funtzionamendu-tenperatura: -22 eta 122 °F artean (-30 eta 50 °C artean)
- Uraren erresistentzia: IP67 (submersible to 1 meter for 30 minutes)
- Neurriak: Wind Speed (current, average, max gust), Temperature, Relative Humidity, Barometric Pressure, Altitude, Dew Point, Heat Index, Wind Chill.
Bermea eta Laguntza
Kestrel products are designed for durability and accuracy. For specific warranty details and to register your product, please refer to the official Kestrel website or the warranty card included with your purchase. For technical support, troubleshooting assistance beyond this manual, or replacement parts, please contact Kestrel customer service directly.
Note: Specifications and features are subject to change without notice. Always refer to the latest information available from the manufacturer.





