Sarrera
This manual provides essential information for the proper use, maintenance, and troubleshooting of your Exergen TemporalScanner Infrared Thermometer. This device is designed for accurate measurement of arterial (core) temperature, offering a reliable alternative to traditional oral, rectal, and tympanic methods.
The Exergen TemporalScanner, model 124275S, is a clinical-grade instrument widely used in professional healthcare settings due to its precision and ease of use.
Produktua amaituview
Figure 1: Exergen TemporalScanner Infrared Thermometer. The image displays the device with its sensor head, main body, and digital display showing "37.4". A label on the device indicates "Dirty lens = low temps" and provides instructions to "Clean center lens every two weeks with Q-tip and alcohol."
The Exergen TemporalScanner measures temperature by scanning the temporal artery on the forehead. Key features include:
- Measures arterial (core) temperature, which is comparable to rectal temperature and approximately 0.8°F (0.4°C) higher than oral temperatures.
- Rugged and reliable construction, designed for durability in various environments.
- Chemically resistant materials allow for thorough disinfection.
- Digital display for clear temperature readings.
Konfigurazioa
Bateriaren instalazioa
The Exergen TemporalScanner requires one 9V battery for operation. To install or replace the battery:
- Bilatu bateriaren konpartimentuaren estalkia, normalean gailuaren atzealdean edo behealdean.
- Ireki konpartimenduaren estalkia.
- Sartu 9V-ko bateria berri bat, polaritate zuzena (+/-) ziurtatuz.
- Itxi bateriaren konpartimenduaren estalkia ondo.
Hasierako Ikuskapena
Before first use, inspect the device for any visible damage. Ensure the sensor lens is clean and free of debris. Refer to the Maintenance section for cleaning instructions.
Funtzionamendu-argibideak
For accurate temperature measurement, follow these steps:
- Kokalekua: Place the sensor head gently on the center of the forehead, midway between the eyebrow and the hairline.
- Activate Scan: Press and hold the scan button (often a large, prominent button on the device body).
- Scan Motion: While holding the button, slowly slide the thermometer straight across the forehead to the hairline, then lift it off the forehead.
- Irakurri tenperatura: Release the scan button. The temperature reading will be displayed on the LCD screen.
Oharra: For optimal accuracy, ensure the skin is dry and free of obstructions like hair or sweat. If the patient is sweating, scan behind the earlobe on the neck for a more accurate reading.
Mantentzea
Cleaning the Sensor Lens
A dirty sensor lens can lead to inaccurate or low temperature readings. It is recommended to clean the center lens every two weeks, or more frequently if needed.
- Gently clean the center of the lens with a cotton swab (Q-tip) moistened with rubbing alcohol.
- Allow the lens to air dry completely before using the thermometer.
General Cleaning and Disinfection
The device is made of chemically resistant materials, allowing for effective disinfection.
- Wipe the exterior of the thermometer with a soft cloth dampened with a mild disinfectant solution or rubbing alcohol.
- Ez murgildu termometroa likidoetan.
- Saihestu gailua kaltetu dezaketen garbitzaile urratzaileak edo disolbatzaileak erabiltzea.
Biltegiratzea
Store the thermometer in a clean, dry place at room temperature, away from direct sunlight and extreme temperatures.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Inaccurate or Low Readings | Dirty sensor lens; improper scanning technique; patient sweating. | Clean the sensor lens as per Maintenance section. Ensure proper scanning technique. If sweating, scan behind the earlobe. |
| No Display/Device Not Turning On | Bateria agortuta edo gaizki instalatuta. | Ordeztu 9V-ko bateria, polaritate zuzena ziurtatuz. |
| Errore-mezua pantailan | Device malfunction or environmental issue. | Refer to the specific error code in the full product manual (if available) or contact customer support. Try re-scanning. |
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Modelo zenbakia | 124275S |
| Marka | Exergenoa |
| Bistaratzeko mota | Digitala |
| Energia iturria | 9V-ko bateria 1 (beharrezkoa) |
| Ezaugarri Berezia | Zehaztasun handia |
| Kolorea | Zuria |
| Kanpoko Materiala | Plastikoa |
| Dakarten osagaiak | Thermometer, battery, sample covers |
| Konektibitate Teknologia | Bluetootha |
| Paketearen neurriak | 9.45 x 6.65 x 2.83 hazbete |
| Elementuaren pisua | 7.51 ontza |
| Fabrikatzailea | Exergenoa |
Bermea eta Laguntza
Bermearen informazioa
The Exergen TemporalScanner is protected by a BIZITZA GARAIKO BERMEA, reflecting the manufacturer's confidence in its rugged and reliable construction.
Bezeroarentzako Arreta
For further assistance, technical support, or warranty claims, please contact Exergen customer service. Refer to the official Exergen webgunea edo produktuaren ontzia kontaktu-informazio eguneratuena lortzeko.
