Sarrera
This manual provides essential information for the safe and effective use, installation, and maintenance of the Sealey SA406F Professional Air Filter. Designed for industrial workshop air supply setups requiring high volume applications, this unit features a polycarbonate bowl, manual drain control, and a protective metal bowl cage.
Image: Sealey SA406F Professional Air Filter, showing its compact design with a clear bowl and metal cage.
Segurtasun Informazioa
Always observe the following safety precautions to prevent injury or damage to the equipment.
- Ensure the air supply is disconnected before performing any installation, maintenance, or troubleshooting.
- Do not exceed the maximum operating pressure specified in the specifications section.
- The unit is suitable for use in solvent-free spray booths up to 70°C. Do not expose to temperatures outside this range.
- Clean the polycarbonate bowl with water only. DO NOT USE ALCOHOL or other solvents, as they can damage the bowl.
- Wear appropriate personal protective equipment (PPE), such as eye protection, when working with compressed air systems.
- Ziurtatu konexio guztiak ondo finkoak direla eta ihesik ez dutela martxan jarri aurretik.
Konfigurazioa eta Instalazioa
Follow these steps for proper installation of the air filter:
- Muntaketa: Securely mount the air filter to a stable surface using the integrated bracket. Ensure it is installed in a vertical position with the drain valve at the bottom.
- Sarrera/Irteerako konexioak: Connect the incoming air supply line to the inlet port (marked "IN" or with an arrow indicating flow direction) and the outgoing air line to the outlet port. The port size is 1/2" BSP. Use appropriate thread sealant on all connections.
- Drainatze-balbula: Ensure the manual drain valve (female 1/8" BSP outlet) is accessible for draining accumulated moisture.
- Presioaren egiaztapena: After installation, slowly open the air supply valve and check all connections for leaks using a soapy water solution. Tighten any leaking connections.
Funtzionamendu-argibideak
The Sealey SA406F air filter operates automatically once installed in the air line. Its primary function is to remove moisture and particulate matter from the compressed air supply.
- Aire-fluxua: The filter is designed to handle a maximum airflow of 212 cfm. Ensure your system's airflow does not consistently exceed this limit.
- Moisture Drainage: Regularly check the polycarbonate bowl for accumulated water. When water reaches the indicated maximum level, open the manual drain valve to release the moisture. Close the valve once all water has been drained. The frequency of drainage will depend on the humidity of the air and the usage rate.
- Tenperatura tartea: Operate the filter within the specified temperature range of up to 70°C (140°F).
Mantentzea
Regular maintenance ensures optimal performance and extends the life of your air filter.
- Ontzien garbiketa: Periodically, or when the bowl appears dirty, disconnect the air supply and carefully remove the polycarbonate bowl. Clean the bowl with clean water only. Do not use solvents, alcohol, or abrasive cleaners, as these can cause cracking or damage. Reinstall the bowl securely.
- Iragazki elementua: The filter element should be inspected periodically for excessive contamination. If the element appears clogged or significantly reduces airflow, it may need replacement. Refer to Sealey's official documentation or contact support for replacement part numbers.
- Zigiluaren ikuskapena: Check O-rings and seals for signs of wear or damage. Replace any worn seals to prevent air leaks.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Aire ihesa | Loose connections, damaged seals, cracked bowl. | Tighten connections. Inspect and replace damaged seals or bowl. |
| Aire fluxu murriztua | Clogged filter element, excessive water in bowl. | Drain water from bowl. Inspect and replace filter element if necessary. |
| Water Not Draining | Drain valve clogged or faulty. | Clear any obstruction from the drain valve. If faulty, replace the valve. |
Zehaztapenak
| Modelo zenbakia | SA406F |
| Portuaren tamaina | 1/2" BSP |
| Gehienezko aire-fluxua | 212 cfm |
| Funtzionamendu-tenperatura maximoa | 70 °C (140 °F) |
| Drain Valve Outlet | Female 1/8" BSP |
| Neurriak (L x W x H) | 279 mm x 146 mm x 76 mm |
| Pisua | 520 g |
| Materiala | Metal (cage), Polycarbonate (bowl) |
Bermea eta Laguntza
Sealey products are manufactured to high standards and are subject to rigorous quality control. This product comes with a standard manufacturer's warranty against defects in materials and workmanship.
- Bermearen erreklamazioetarako, gorde erosketaren egiaztagiria.
- Do not attempt to repair the unit yourself, as this may void the warranty.
- For technical support, spare parts, or service inquiries, please contact Sealey customer service or visit the official Sealey webgunea.
- Informazio gehiago eta harremanetarako datuak aurki ditzakezu hemen: Sealey Store.
