Produktua amaituview
The Einhell GE-GP 9041 E garden pump is a high-quality, powerful, and intelligent device from the Eco Power series, designed to assist ambitious hobby gardeners in watering their gardens using collected rainwater. This energy-efficient 900-watt pump can deliver up to 4,100 liters of water per hour.
Figure 1: The Einhell GE-GP 9041 E garden pump, showcasing its red and black design with a clear filter housing.
Ezaugarri nagusiak:
- Eco Power Technology: Ensures higher flow rate with reduced power consumption.
- Gainkarga termikoaren babesa: Prevents motor overheating during high-performance operation.
- Integrated Pre-filter: Protects the pump from impurities in the drawn water.
- Eramateko helduleku erosoa: Allows for easy and convenient transport.
- Separate Water Filling Opening: Facilitates easy priming of the pump before use.
- Practical Water Drain Screw: Enables easy draining of residual water for winterization.
- High-Quality Connections: 33.3 mm (1") IG suction and pressure connections made of durable metal for extended lifespan.
Figure 2: The Eco Power logo, indicating efficient technology for higher flow and lower consumption.
Konfigurazioa eta Instalazioa
Proper setup is crucial for the optimal performance and longevity of your Einhell GE-GP 9041 E garden pump. Follow these steps carefully.
1. Ponparen kokapena
Place the pump on a stable, level surface, protected from direct weather exposure. Ensure adequate ventilation around the pump.
Figure 3: Detail of the pump's stable base, designed for secure placement.
2. Mahuka konektatzea
Connect the suction hose to the 33.3 mm (1") IG suction connection and the pressure hose to the 33.3 mm (1") IG pressure connection. Ensure all connections are tight to prevent air leaks, which can affect pump performance.
4. irudia: View of the durable metal suction and pressure connections on the pump.
Figure 5: Another perspective of the robust hose connection point.
3. Ponpa prestatzea
Before first use or after the pump has been drained, it must be primed. Open the large water filling opening and fill the pump housing completely with water until it overflows. Close the filling opening securely.
Figure 6: Diagram illustrating the large water filling opening for easy priming.
4. Integrated Pre-filter and Non-Return Valve
The pump features an integrated pre-filter and non-return valve. The pre-filter protects the pump from debris, while the non-return valve prevents water from flowing back, maintaining prime. Regularly check and clean the pre-filter to ensure optimal performance.
Figure 7: Close-up of the transparent pre-filter housing, allowing visual inspection of the filter.
Figure 8: Diagram depicting the integrated pre-filter, designed to capture impurities.
Figure 9: Diagram illustrating the function of the non-return valve, preventing backflow.
Funtzionamendu-argibideak
Once the pump is set up and primed, you can begin operation. Always ensure the pump is connected to a suitable power supply.
1. Ponpa martxan jartzea
Plug the power cord into a grounded electrical outlet. Use the ON/OFF switch to start the pump. The pump will begin drawing water and building pressure.
Figure 10: A user demonstrating the Einhell garden pump in action, watering a garden.
2. Errendimenduaren jarraipena
The GE-GP 9041 E is designed for continuous operation within its specified limits. The Eco Power technology ensures efficient water delivery. The thermal overload protection will automatically shut off the pump if the motor temperature becomes too high, preventing damage.
Figure 11: Diagram illustrating the internal cooling system of the pump, crucial for preventing overheating.
3. Itzaltzea
To turn off the pump, simply switch the ON/OFF switch to the OFF position. Disconnect the power cord from the outlet when the pump is not in use for extended periods.
Mantentzea
Regular maintenance ensures the longevity and efficient operation of your garden pump.
1. Aurreiragazkia garbitzea
Periodically inspect the integrated pre-filter for debris. If clogged, remove the filter housing, clean the filter element under running water, and reassemble. Ensure the seal is properly seated to prevent leaks.
2. Winterization (Draining)
Before the first frost, or if the pump will not be used for an extended period in cold conditions, it is essential to drain all residual water to prevent freezing damage. Use the practical water drain screw located at the bottom of the pump to completely empty the unit.
Figure 12: Close-up of the water drain screw, used for emptying the pump for winter storage.
Gorde ponpa leku lehor eta izozteetatik babestuan.
Arazoak konpontzea
This section provides solutions to common issues you might encounter with your garden pump.
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Ponpa ez da martxan jartzen. | No power supply; Thermal overload protection activated; Motor fault. | Check power connection and fuse. Allow pump to cool down if thermal protection activated. Contact service if motor fault suspected. |
| Pump runs but no water is delivered or pressure is low. | Pump not primed; Suction hose leaking air; Suction hose blocked; Water source empty; Pre-filter clogged. | Prime the pump completely. Check all suction hose connections for leaks. Clear any blockages in the suction hose. Ensure water source is sufficient. Clean the pre-filter. |
| Pump stops during operation. | Thermal overload protection activated; Water source empty; Air in pump. | Allow pump to cool down. Check water source. Re-prime the pump. |
| Unusual noise from pump. | Air in pump; Debris in pump; Worn bearings. | Re-prime the pump. Check for and remove any debris. Contact service if noise persists. |
Zehaztapen Teknikoak
| Zehaztapena | Balioa |
|---|---|
| Marka | Einhell |
| Modelo zenbakia | GE-GP 9041 E |
| Fabrikatzailea | Einhell |
| Energia iturria | Kable elektrikoa |
| liburukiatage | 230 Volt |
| Wattage | 900 watt |
| Gehienezko Emaria | 4100 litro orduko |
| Buruaren Gehieneko Altuera | 48 metro |
| Produktuaren neurriak (L x W x H) | 49 x 24 x 30.99 cm |
| Elementuaren pisua | 10.9 kilogramo |
| Materiala | Metala |
| Kolorea | Gorria |
Bermea eta Laguntza
For warranty information, technical support, or spare parts, please contact Einhell customer service directly. Keep your purchase receipt and product model number handy when contacting support.
You can find more information and contact details on the official Einhell webgunea edo zure tokiko dendariaren bidez.
Note: Specific warranty terms may vary by region. Please refer to the warranty card included with your product or the manufacturer's official webinformazio zehatza lortzeko gunea.
