Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign User Manual

Model: EDG 1 R EL M6

1. Sarrera

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign. This edge-lit sign is designed for emergency egress lighting in commercial and institutional environments, ensuring clear visibility during power outages.

The EDG 1 R EL M6 features a durable aluminum construction, energy-efficient LED illumination, and a reliable battery backup system. Adherence to these instructions will ensure proper function and compliance with safety standards.

2. Segurtasun informazioa

Irakurri argibide guztiak: Before beginning installation or maintenance, carefully read and understand all instructions provided in this manual.
Deskonektatu energia: Always disconnect power at the circuit breaker before installing, servicing, or cleaning the unit. Failure to do so may result in electric shock or serious injury.
Pertsonal kualifikatua: Installation, servicing, and testing must be performed by qualified personnel in accordance with all national and local electrical codes and safety regulations.
UL 924 betetzea: This product is designed to meet UL 924 standards for emergency lighting and power equipment. Ensure all installations comply with these and other applicable standards.
Bateriaren maneiua: The unit contains a sealed, maintenance-free nickel-cadmium battery. Do not attempt to open or service the battery. Dispose of batteries according to local regulations.
Ingurumen baldintzak: Install in locations where ambient temperatures are within the specified operating range. Do not install near gas or electric heaters.

3. Paketearen edukia

Egiaztatu osagai guztiak daudela eta kalterik gabe daudela paketea irekitzean:

Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign (Battery-Powered, Red)
Mounting Hardware (typically includes screws, anchors, and canopy)
Instruction Sheet / Wiring Diagram

4. Konfigurazioa eta instalazioa

The EDG 1 R EL M6 is designed for surface mounting. Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight.

4.1 Muntatzeko aukerak

This unit supports various surface mounting configurations. Refer to the included wiring diagram for specific instructions on ceiling, wall, or end mounting.

Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign, red letters, top-down view.

Irudia: Goitik behera view of the Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign, showing the brushed aluminum housing and clear acrylic panel with red 'EXIT' letters.

4.2 Konexio elektrikoak

Elikatze-iturria: The unit is dual voltage (120/277V). Connect the appropriate AC power supply wires to the fixture's input terminals as indicated in the wiring diagram.
Bateria konexioa: Ensure the internal battery is properly connected after wiring the AC power. The battery is typically pre-connected but may require a final plug-in during installation.
Hasierako karga: After installation and power connection, allow the unit to charge for a minimum of 24 hours before conducting any tests. This ensures the nickel-cadmium battery reaches full capacity.

Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign, red letters, side view.

Irudia: Albokoa view of the Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign, highlighting its slim profile and edge-lit design.

5. Funtzionamendu-argibideak

The Lithonia Lighting EDG 1 R EL M6 operates automatically once properly installed and charged.

Funtzionamendu normala: When AC power is present, the LED 'EXIT' letters will be illuminated. The internal battery will continuously charge to maintain readiness for emergency operation.
Larrialdi Eragiketa: In the event of an AC power failure, the unit will automatically switch to battery power, illuminating the 'EXIT' letters for a minimum of 90 minutes.
Proba botoia: A test button is typically located on the side or bottom of the unit. Pressing this button simulates an AC power failure, allowing you to verify the emergency lighting function. The 'EXIT' letters should illuminate when the button is pressed and extinguish when released (assuming AC power is present).

Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign, red letters, front view.

Irudia: Aurrealdea view of the Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign, clearly showing the red 'EXIT' letters.

6. Mantentzea

The EDG 1 R EL M6 is designed for low maintenance. However, regular checks are essential to ensure continued reliability.

Hileko probak: Press the test button for at least 30 seconds to ensure the emergency lights operate.
Urteko proba: Disconnect AC power to the unit for a full 90-minute discharge test. The unit should remain illuminated for the entire duration. Reconnect AC power after the test.
Garbiketa: Clean the exterior surfaces and acrylic panel with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure power is disconnected before cleaning.
Bateria ordezkatzea: The nickel-cadmium battery is maintenance-free and has a long lifespan. If the unit fails to hold a charge or operate for the required 90 minutes during testing, the battery may need replacement by qualified service personnel.
NFPA Compliance: All life safety equipment, including emergency lighting for paths of egress, must be maintained, serviced, and tested in accordance with all National Fire Protection Association (NFPA) and local codes.

7. Arazoak

If your EDG 1 R EL M6 LED Emergency Exit Sign is not functioning as expected, refer to the following common issues and solutions:

Arazoa	Kausa posiblea	Irtenbidea
'EXIT' letters do not illuminate during AC power failure.	Battery not charged or faulty; AC power not connected.	Ensure AC power is connected and allow 24 hours for initial charge. If problem persists, battery may need replacement.
'EXIT' letters do not illuminate when test button is pressed.	Battery not connected or faulty; unit not receiving AC power.	Verify AC power connection. Check battery connection. Allow 24 hours for charge.
Unit does not stay illuminated for 90 minutes during annual test.	Battery capacity reduced due to age or defect.	Battery needs replacement. Contact qualified service personnel.
'EXIT' letters are dim.	Low battery charge; dirty acrylic panel.	Allow unit to charge for 24 hours. Clean the acrylic panel.

For issues not listed above, or if troubleshooting steps do not resolve the problem, contact Lithonia Lighting customer support or a qualified electrician.

8. Zehaztapenak

Detailed technical specifications for the Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign:

Modelo zenbakia: EDG 1 R EL M6
Parte-zenbakia: LTHEDG1RELM6
Fabrikatzailea: Lithonia Argiztapena
Neurriak: Gutxi gorabehera 13 hazbete (zabalera) x 11.12 hazbete (altuera)
Elementuaren pisua: 2.2 libra (1 kilogramo)
Kolorea: Red (letters)
Estiloa: Bateriaren bidez
Amaiera: Eskuila Aluminioa
Materiala: Aluminum (housing), Acrylic (panel)
Energia iturria: Korronte alternoa (kargatzeko)
liburukiatage: 120/277V (Dual Voltage)
Wattage: 3 watt
Bonbilla mota: LED
Muntatze mota: Surface Mount (Ceiling, Wall, End)
Ziurtagiria: UL zerrendatua
Bateria: Sealed, maintenance-free Nickel-Cadmium
Emergency Operation Duration: 90 minutu gutxienez
LED Lamp Bizitza: Gehienez 100,000 ordu
Letter Height: 6 hazbetekoa
Stroke Width: 3/4 hazbetekoa
Viewdistantzia: 100 feet (UL 924 standard)

Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign with dimensions: 13 inches wide, 8 inches high.

Image: Lithonia Lighting EDG 1 R EL M6 LED Emergency Exit Sign with key dimensions indicated.

9. Bermea eta Laguntza

For detailed warranty information, product registration, or technical support, please visit the official Lithonia Lighting webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Gorde erosketa-agiria berme-erreklamazioetarako.

Lithonia Lighting Customer Service: Refer to the contact information provided on the product packaging or the official brand webgunea.

	Lithonia Lighting ELT Serieko Altzairuzko Larrialdietako Argiztapen Industriala - Zehaztapenak eta Eskaerak Lithonia Lighting-en ELT16, ELT24, ELT36 eta ELT50 altzairu industrialeko larrialdiko argiztapen unitateen zehaztapen zehatzak, ezaugarriak eta eskaera-informazioa. Informazio elektrikoa, bateria, muntaketa eta bermearen xehetasunak barne hartzen ditu.
	Lithonia Lighting LRP/LRP2 LED ertz-argiztatutako larrialdi-irteera seinalearen instalazio eta mantentze-lanen gida Lithonia Lighting LRP/LRP2 Serieko 120/277V LED Ertz-Argitutako Larrialdietako Irteera Seinaleen instalazio, ikuskapen eta mantentze-lanetarako argibide osoak, F, FA eta FI aukerak barne, DC keinukaria eta alarma akustikoa dutenak.
	Lithonia Lighting LED Combo Exit & Emergency Light Installation Instructions Comprehensive installation, operation, and maintenance guide for Lithonia Lighting's LED Combo Exit & Emergency Light, covering safety, mounting procedures, wiring, and battery backup.
	Lithonia Lighting ECBRM Quantum Running Man LED Light Bar Combo Unit - Emergency Lighting Specification Detailed specifications for the Lithonia Lighting ECBRM Quantum Running Man LED Light Bar Combo Unit, an emergency lighting fixture designed for path of egress illumination and marking. Includes features, construction, electrical, battery, installation, listings, warranty, ordering information, and spacing guidelines.
	Lithonia Lighting LED Combo Exit & Emergency Light Installation Instructions (EMCSA00802) Detailed installation instructions for the Lithonia Lighting LED Combo Exit & Emergency Light (Model EMCSA00802 Rev. F). Includes safety warnings, mounting procedures for back, top, and side installations, wiring diagrams, and operation details.
	Lithonia LED Combo Exit & Emergency Light Installation Instructions Comprehensive installation guide for the Lithonia LED Combo Exit & Emergency Light, covering safety warnings, installation procedures for various mounting types, operation details, maintenance, and wiring diagrams.