YSI 251401Y

YSI 251401Y DPD Kloro Libreko Erreaktibo Hautsaren Erabiltzaile Eskuliburua

For pHotoFlex and 900 Chlorine Colorimeter

1. Produktua amaitu daview

The YSI 251401Y DPD Free Chlorine Reagent Powder is an EPA-approved chemical reagent designed for accurate measurement of free chlorine concentrations. This product is specifically formulated for use with YSI pHotoFlex and 900 Chlorine Colorimeter instruments, providing reliable results within a range of 0.02 to 2 mg/L. Each pack contains 100 individual 10ml volume powder packets, ensuring convenience and consistent dosing for laboratory and field applications.

YSI 251401Y DPD Free Chlorine Reagent Powder Packet

Image 1.1: A single packet of YSI 251401Y DPD Free Chlorine Reagent Powder. The label indicates "Powder Packets," "Part Number: 251401Y," "Lot Code: L 01 A," and "Exp: 01.2017." It also includes safety warnings and manufacturer contact information.

2. Safety Information and Handling

This product is intended for professional laboratory and field use only. Adherence to all safety guidelines is critical for proper and safe operation.

3. Konfigurazioa eta prestaketa

Before beginning any measurement, ensure you have the necessary equipment and that your colorimeter is calibrated according to its specific user manual.

3.1 Beharrezko materialak (ez daude barne)

3.2 Erreaktiboak prestatzea

The YSI 251401Y DPD Free Chlorine Reagent is provided in pre-measured powder packets, eliminating the need for manual weighing or dilution. Each packet contains the precise amount of reagent for a 10ml sample bolumena.

4. Operating Instructions for Free Chlorine Measurement

Follow these steps for accurate free chlorine measurement using the YSI 251401Y DPD Free Chlorine Reagent Powder with a compatible YSI colorimeter.

  1. Prestatu SampZelula: Rinse a clean sample cell thoroughly with deionized water, then with a small amount of the sample probatu beharrekoa.
  2. Bete SampZelula: Bete sample cell with 10 ml of the water sample to be analyzed. Ensure the sample volume is precise.
  3. Gehitu erreaktiboa: Carefully open one YSI 251401Y DPD Free Chlorine Reagent Powder packet. Add the entire contents of the powder packet to the 10 ml sample zelulan.
  4. Nahasketa: Txapela sample cell and invert it gently several times to dissolve the powder completely. Avoid shaking vigorously, which can introduce air bubbles. A pink color will develop if free chlorine is present.
  5. Erreakzio denbora: Allow a reaction time of approximately 1 minute for the color to fully develop. Consult your colorimeter's manual for specific reaction time recommendations.
  6. Neurria: Insert the prepared sample cell into the YSI pHotoFlex or 900 Chlorine Colorimeter. Follow the instrument's instructions to initiate the measurement. The colorimeter will display the free chlorine concentration in mg/L.
  7. Erregistroaren emaitzak: Record the measurement results immediately.
  8. Garbiketa: After measurement, empty the sample cell and rinse it thoroughly with deionized water.

Oharra: For best results, perform measurements promptly after sample collection. The DPD method is sensitive to light and temperature; protect samples and reagents from direct sunlight and extreme temperatures.

5. Mantentzea eta biltegiratzea

Proper storage of the reagent packets is essential to maintain their integrity and ensure accurate results.

6. Arazoak

This section addresses common issues that may arise during the use of the DPD Free Chlorine Reagent.

ArazoaKausa posibleaIrtenbidea
No color development or faint color when chlorine is expected.
  • Expired reagent.
  • Insufficient mixing.
  • Sample pH outside optimal range.
  • Interfering substances in sample.
  • Check expiration date; use fresh reagent.
  • Ensure complete dissolution of powder.
  • Egiaztatuample pH is within the colorimeter's specified range for DPD method.
  • Consult colorimeter manual for known interferences.
Inconsistent or erratic readings.
  • desegokia sample bolumena.
  • Kutsatutako sample zelulak.
  • Aire burbuilak s-tanample cell.
  • Colorimeter calibration issue.
  • Ensure precise 10 ml sample bolumena.
  • Thoroughly clean sample cells before each use.
  • Gently invert to mix, avoid vigorous shaking.
  • Perform colorimeter calibration as per instrument manual.

7. Zehaztapenak

8. Bermea eta Laguntza

For technical support, product inquiries, or to request a Safety Data Sheet (SDS), please contact YSI directly using the information below.

YSI stands behind the quality of its products. Please refer to the official YSI website or contact customer support for detailed warranty information applicable to this reagent.

Erlazionatutako dokumentuak - 251401Y

Aurreview YSI 32 modeloko konduktantzia-neurgailuaren argibideen eskuliburua
YSI 32 modeloko konduktantzia-neurgailuaren instrukzio-eskuliburua, non deskribapen orokorra, zehaztapenak, funtzionamendu-prozedurak, mantentze-lanak eta kalibrazioa zehaztu daitezkeen.
Aurreview YSI Pro20/Pro20i Hasiera Azkarreko Gida: Kalibrazioa eta Funtzionamendua
YSI Pro20/Pro20i oxigeno disolbatuaren neurgailuak kalibratzeko eta erabiltzeko gida laburra, mintzaren instalazioa, sentsoreen konfigurazioa, barometroaren eta DOaren kalibrazioa, gazitasun-konpentsazioa eta neurketak egitea barne hartzen dituena. Funtzionamendu-urrats garrantzitsuak eta harremanetarako informazioa barne hartzen ditu.
Aurreview YSI 3821 Buffer Soluzioa pH 4.00 Segurtasun Datuen Orria (SDS)
YSI 3821 pH 4.00ko Buffer Soluzioaren Segurtasun Datuen Orri Osoa (SDS), produktuaren identifikazioa, arriskuak, osaera, lehen sorospenak, manipulazioa, biltegiratzea eta araudiari buruzko informazioa zehaztuz.
Aurreview YSI EcoSense DO200A/DO200M Oxigeno Disolbatu eta Tenperatura Tresnen Erabiltzaile Eskuliburua
Erabiltzailearen eskuliburu honek YSI EcoSense DO200A eta DO200M oxigeno disolbatuko eta tenperaturako tresnak erabiltzeko, instalatzeko, mantentzeko eta arazoak konpontzeko argibide osoak eskaintzen ditu. Zehaztapenei, osagarriei eta bermeari buruzko informazioa ere ematen du.
Aurreview YSIT-1 satelite transmisorearen funtzionamendu eta mantentze-lanen eskuliburua
YSI YSIT-1 modeloko satelite-igorlearen erabiltzailearen eskuliburu osoa, funtzionamendua, mantentze-lanak, hardwarearen konfigurazioa eta serieko komandoen erreferentzia azaltzen dituena. Xehetasunen artean daude denbora-kudeaketa, datuen biltegiratzea, GOES datuen formatua, RF igorlearen kontrola eta GPS sinkronizazioa.
Aurreview YSI IQ Sensor Net MIQ/CHV PLUS funtzionamendu eskuliburua
Erabilera-eskuliburu honek YSI IQ Sensor Net MIQ/CHV PLUS balbula-modulurako argibide zehatzak eskaintzen ditu, aire konprimituz funtzionatzen duten sentsore-garbiketa-buruen instalazioa, ezarpenak, mantentze-lanak eta segurtasun-jarraibideak barne hartzen dituena.