1. Produktua amaitu daview
The EBL 8-Bay Individual Charger is designed for Ni-MH and Ni-Cd AA and AAA rechargeable batteries. It features individual charging slots, smart LED indicators, and automatic shut-off for safe and efficient charging.
Figure 1: EBL 8-Bay Battery Charger and power cable.
Figure 2: The upgraded C9042W charger supports independent charging for each battery slot, unlike older models that required charging in pairs.
2. Konfigurazioa
- Unpack the EBL 8-Bay Battery Charger and its power cable from the packaging.
- Connect the AC power cable to the charger's AC port.
- Plug the other end of the AC power cable into a standard wall outlet (AC 100-240V).
Figure 3: Detail of the AC port for power connection.
3. Funtzionamendu-argibideak
- Sartu bateriak: Carefully insert 1 to 8 Ni-MH or Ni-Cd AA or AAA rechargeable batteries into the charging slots. Ensure correct polarity (+ and - ends) as indicated on the charger.
Figure 4: Proper insertion of AA and AAA batteries, aligning positive and negative terminals.
- LED adierazleak: Each charging bay has a dedicated LED indicator to show the charging status:
- Argi gorria: Bateria kargatzen ari da.
- Argi berdea: Bateria guztiz kargatuta dago.
- Red LED Flash: Indicates a bad battery or a non-rechargeable battery has been inserted.
Figure 5: Smart LED indicators provide real-time charging status for each battery.
- Itzaltze automatikoa: The charger is controlled by an MCU (Microcontroller Unit) and will automatically stop charging when batteries are full, preventing over-voltage, gehiegizko korrontea edo gehiegizko beroa.
Figure 6: The charger features an auto shut-off function for safety and battery longevity.
- Korronte konstanteko kargatzea: This feature protects 1.2V batteries against current fluctuation, ensuring safe operation and maximizing battery performance.
4. Mantentzea
- Kargagailua garbi eta lehor mantendu. Saihestu hezetasunaren edo tenperatura altuen eraginpean jartzea.
- Wipe the charger with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- When not in use, store the charger and batteries in a cool, dry place away from direct sunlight.
5. Arazoak
- Batteries not charging (Red LED Flash):
- Ensure the batteries are rechargeable Ni-MH or Ni-Cd types. The charger is not compatible with alkaline or other non-rechargeable batteries.
- Egiaztatu bateriak polaritate zuzenarekin sartuta dauden.
- The battery might be defective or too old to hold a charge. Try a different battery.
- Karga motela:
- Ensure the charger is connected to a stable power source.
- Charging time varies depending on the battery capacity (mAh) and its current charge level.
- Refreshing Low Voltage Batteries: The charger has a feature to refresh low voltage batteries, which can sometimes help revive them.
Figure 7: The charger can help refresh low voltage bateriak.
6. Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Produktuaren neurriak | 1 x 3 x 6.9 hazbete (1"S x 3"Z x 6.9"A) |
| Elementuaren pisua | 0.01 ontza |
| Modelo zenbakia | C9042W |
| Marka | EBL |
| Kolorea | Zuria |
| Irteera boltage | 1.2 Volt |
| Bateria mota bateragarriak | Ni-MH, Ni-Cd (AA, AAA) |
| Charging Bays | 8 (Individual) |
7. Bermea eta laguntza
For warranty information and customer support, please refer to the official EBL website or contact EBL customer service directly. You can visit the EBL Store on Amazon for more products and support resources.
