NETGEAR R7000 Nighthawk AC1900 banda bikoitzeko Gigabit WiFi bideratzailearen erabiltzailearen eskuliburua

1. Sarrera

1.1 Produktua gainditzeaview

The NETGEAR R7000 Nighthawk AC1900 is a high-performance dual-band wireless router designed to provide fast and reliable internet connectivity for homes and small offices. It supports the 802.11ac Wi-Fi standard, offering combined speeds of up to 1900 Mbps across its 2.4 GHz and 5 GHz bands. Equipped with Gigabit Ethernet ports and a powerful dual-core processor, this router is suitable for demanding applications such as online gaming, HD video streaming, and connecting multiple devices simultaneously.

1.2 Paketearen edukia

• NETGEAR R7000 Nighthawk AC1900 WiFi bideratzaile adimenduna
• Three (3) Detachable Antennas
• Ethernet kablea
• Power Adapter (Input Voltage: 100-240V)
• Hasierako gida azkarra

2. Konfigurazioa

2.1 Konexio fisikoa

1. Routerraren kokapena: Place the router in a central location to ensure optimal Wi-Fi coverage throughout your area. Avoid placing it near large metal objects, concrete walls, or other electronic devices that may cause interference.
2. Lotu antenak: Screw the three detachable antennas onto the connectors on the back and sides of the router. Adjust them vertically for best performance.
3. Modemera konektatu: Connect one end of the provided Ethernet cable to the yellow Internet port (WAN) on the back of the R7000 router. Connect the other end to an Ethernet port on your modem.
4. Konektatu energiara: Connect the power adapter to the router's power port and plug it into an electrical outlet. Press the Power On/Off button if necessary. Wait for the Power LED on the front of the router to turn solid white.
5. Konektatu gailuak: You can connect your computer or other devices to the router using an Ethernet cable (to one of the four yellow LAN ports) or wirelessly using the default Wi-Fi network name (SSID) and password found on the router's label.

Figure 1: Rear panel connections of the NETGEAR R7000 router.

2.2 Hasierako konfigurazioa

After physical setup, you will need to configure the router:

1. Ireki a web browser on a computer or device connected to the router.
2. Mota routerlogin.net or 192.168.1.1 helbide-barran sartu eta Sartu sakatu.
3. Follow the on-screen instructions of the NETGEAR genie setup wizard to configure your internet connection and personalize your Wi-Fi network name (SSID) and password.
4. It is recommended to change the default administrator password for security purposes.

3. Routerraren funtzionamendua

3.1 Gailuak konektatzea

Wi-Fi konexioa: On your wireless device, search for available Wi-Fi networks. Select your router's Wi-Fi network name (SSID) and enter the password. The R7000 supports both 2.4 GHz and 5 GHz bands, allowing you to connect devices to the most suitable network for their needs.

WPS (Wi-Fi Babestutako Konfigurazioa): For compatible devices, press the WPS button on the router and then activate WPS on your device within two minutes to establish a secure wireless connection without entering a password.

Ethernet konexioa: For wired devices, connect an Ethernet cable from the device to any of the four yellow LAN ports on the router.

3.2 Hari gabeko ezarpenak

You can customize your Wi-Fi settings by logging into the router's web interfazea (routerlogin.net). Here you can:

• Change the Wi-Fi network names (SSIDs) for both 2.4 GHz and 5 GHz bands.
• Update your Wi-Fi passwords.
• Select different security protocols (WPA2-PSK is recommended).
• Adjust wireless channels to avoid interference.

3.3 Gonbidatuen sarea

The R7000 allows you to set up a separate guest Wi-Fi network. This provides internet access to guests while keeping your main network and connected devices secure and private. You can enable, configure, and set a unique password for the guest network through the router's web interfazea.

3.4 USB biltegiratzea

The router features a USB 3.0 port on the front and a USB 2.0 port on the rear. You can connect a USB storage device (like a flash drive or external hard drive) to either port to create network-attached storage (NAS). This allows you to share files and media across your network or access them remotely using NETGEAR ReadySHARE features.

2. irudia: Aurrealdea view of the NETGEAR R7000 router, showing the USB 3.0 port.

4. Mantentzea

4.1 Firmware eguneraketak

Regularly updating your router's firmware is crucial for security, performance, and access to new features. You can check for and install firmware updates through the router's web interface, usually found under the 'Advanced' or 'Administration' sections. It is recommended to perform updates during off-peak hours and not to interrupt the process once started.

4.2 Routerraren berrezarpena

If you encounter persistent issues or forget your router's login credentials, you may need to perform a factory reset. This will revert all settings to their default values. To perform a factory reset:

1. With the router powered on, use a paperclip or similar pointed object to press and hold the Reset button (located on the rear panel) for about 7-10 seconds.
2. Release the button when the Power LED starts blinking.
3. The router will restart with factory default settings. You will then need to reconfigure it using the initial setup process.

5. Arazoak

5.1 Gai arruntak

• Ez dago Interneteko konexiorik: Check the Internet LED on the router. If it's amber or off, ensure your modem is working correctly and the Ethernet cable is securely connected to the router's yellow Internet port. Restart both your modem and router.
• Wi-Fi abiadura motela: Ensure your devices are connected to the appropriate Wi-Fi band (5 GHz for faster speeds, 2.4 GHz for better range). Check for interference from other devices. Consider repositioning the router.
• Ezin da bideratzailearen ezarpenetara sartu: Verify that your device is connected to the router (either wired or wirelessly). Try clearing your browser's cache or using a different browser. Ensure you are typing routerlogin.net or 192.168.1.1 correctly. If you forgot the password, perform a factory reset.

5.2 LED adierazleak

The LEDs on the front of the router provide status information:

• Power LED: Solid white indicates the router is powered on and operating normally. Blinking white indicates a firmware upgrade or factory reset.
• Interneteko LEDa: Solid white indicates a successful internet connection. Amber indicates no internet connection. Blinking white indicates data activity.
• Wi-Fi 2.4 GHz / 5 GHz LEDs: Solid white indicates the respective Wi-Fi band is enabled. Blinking white indicates wireless activity.
• Ethernet LAN LEDs (1-4): Solid white indicates a device is connected to that port. Blinking white indicates data activity.
• USB LEDa: Solid white indicates a USB device is connected. Blinking white indicates data activity on the USB port.

6. Zehaztapenak

7. Bermea eta Laguntza

7.1 Bermearen informazioa

This product is covered by a manufacturer's limited warranty. The specific terms and duration of the warranty may vary by region and purchase date. Please refer to the warranty card included with your product or visit the official NETGEAR webbermearen informazio zehatza lortzeko gunea.

7.2 Laguntza Teknikoa

For further assistance, technical support, or to access the latest drivers and documentation, please visit the official NETGEAR support webgunea. Maiz egiten diren galderak, arazoak konpontzeko gidak eta bezeroarentzako arreta-zerbitzuaren harremanetarako informazioa aurki ditzakezu bertan.

NETGEAR laguntza Webgunea: www.netgear.com/support/