SSV Works WP3-UO4LA

SSV Works WP3-UO4LA Universal Overhead Stereo System

Model: WP3-UO4LA

Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of your SSV Works WP3-UO4LA Universal 4 Speaker Overhead Stereo System. This system is designed to deliver high-quality audio in various UTV models, including Kawasaki Teryx 2 and 4, Polaris Ranger 400, 800, and 900XP, Yamaha Viking and Rhino, and Honda Pioneer 700. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

Segurtasun Informazioa

Beti beti segurtasun-neurri hauek:

  • Ensure the vehicle's ignition is off and the battery is disconnected before beginning any electrical installation.
  • Instalazioan zehar, segurtasun-ekipo egokia erabili, begien babesa barne.
  • Verify all wiring connections are secure and properly insulated to prevent short circuits.
  • Do not operate the system at excessively high volumes for extended periods, as this may cause hearing damage.
  • Keep the system clear of obstructions that could impede sound or airflow.
  • Produktu honek Kaliforniako Estatuak minbizia eta jaiotza-akatsak edo ugalketa-kalte batzuk eragiten dituen produktu kimikoak ditu. Eskuak garbitu ondoren.

Paketearen edukia

Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:

  • SSV Works WP3-UO4LA Universal Overhead Stereo System Unit
  • Mounting Hardware (stainless steel)
  • Kableatu Harness
  • Instalazio argibideak (eskuliburu hau)

Instalazioa

The SSV Works WP3-UO4LA system is designed for overhead mounting in UTVs. Installation typically takes approximately 15 minutes with basic tools.

SSV Works WP3-UO4LA Universal 4 Speaker Overhead Stereo System

Buru bat view of the SSV Works WP3-UO4LA Universal 4 Speaker Overhead Stereo System. The unit features four 6.5-inch marine-grade speakers, two on each side, flanking a central control panel. The control panel includes a digital display for audio functions and buttons for operation. Below the main display, there is an integrated light bar. The entire unit is housed in a black, textured fiberglass enclosure designed for overhead mounting in UTVs.

Muntaketa

  • The system is compatible with roll cages ranging from 51 to 58.75 inches in width.
  • The mounting brackets are adjustable and slide along the back of the sound bar, allowing for flexible positioning (front, overhead, or rear) within the roll cage.
  • Securely attach the unit to the vehicle's roll cage using the provided stainless steel mounting hardware. Ensure all screws are tightened to prevent vibration. Applying thread-locking compound (e.g., Loctite) to screws is recommended to prevent loosening due to vehicle vibration.

Kableatua

  • The system requires a simple 2-wire hookup. Connect the positive (+) wire to a switched 12V power source and the negative (-) wire to a reliable ground point on the vehicle chassis.
  • For optimal performance and to prevent Bluetooth disconnection issues when the ignition is turned off, it is recommended to connect the power directly to the battery with an inline fuse, or to a constant 12V source via a separate switch.
  • The built-in 200-watt 4-channel amplifier powers the four 6.5-inch marine-grade speakers. The front two channels are internally configured for the soundbar speakers. The rear two channels are available for powering up to four additional 4-ohm speakers if wired correctly.
  • An optional RCA low-level output is available for system expansion (requires WP-HRCA adapter, sold separately).

Funtzionamendua

Bluetooth parekatzea

  • Power on the stereo system.
  • Navigate to the Bluetooth mode on the system's display.
  • Bilatu eskuragarri dauden Bluetooth gailuak zure telefonoan edo Bluetooth gaitutako beste gailu batean.
  • Select "SSV Works" (or similar name displayed on the unit) from the list to pair.
  • Once paired, you can stream audio from your device, including music streaming apps like Pandora, Spotify, and SoundCloud.

AM/FM irratia

  • Switch the system to AM/FM radio mode.
  • Use the controls on the unit to scan for stations or manually tune to a desired frequency.
  • The system includes an internal FM antenna for local radio reception.

External Audio Output

  • If using the optional RCA low-level output, connect it to an external amplifier or additional speakers as per the WP-HRCA adapter instructions.

Mantentzea

The WP3-UO4LA features a durable fiberglass construction and a weatherproof design, allowing it to withstand various environmental conditions.

  • Garbiketa: Erabili biguna, damp cloth to clean the exterior of the unit. Avoid harsh chemicals or abrasive cleaners that could damage the finish or components.
  • Ikuskapena: Periodically check all mounting hardware and wiring connections to ensure they remain secure, especially after off-road use.
  • Biltegiratzea: If storing the vehicle for an extended period, ensure the stereo system is powered off.

Arazoak konpontzea

GaiaKausa posibleaIrtenbidea
Unitateari ez dago energiarikLoose wiring connection, blown fuse, incorrect power source.Check all power and ground connections. Inspect the fuse in the wiring harness and replace if necessary. Ensure the power source is providing 12V.
Bluetootha maiz deskonektatzen daPower source issues (e.g., connected to a keyed ignition that cuts power), interference.Connect the unit directly to the battery with an inline fuse, or to a constant 12V source via a separate switch. Ensure your device is within range and there are no major sources of interference.
Irrati-harrera eskasaWeak signal, environmental factors.The system uses an internal FM antenna. Reception quality can vary based on location and terrain. Try moving to an area with better signal.
Unitateak bibratzen edo dardarka egiten duLoose mounting hardware, internal components rattling.Tighten all mounting screws. Consider using thread-locking compound. If internal rattling occurs, contact SSV Works support.
Bozgorailuen soinurik ezVolume too low, incorrect source selected, speaker wiring issue.Increase volume. Verify the correct audio source (Bluetooth, AM/FM) is selected. Check speaker connections if accessible.

Zehaztapenak

EzaugarriXehetasuna
Modelo zenbakiaWP3-UO4LA
MaterialaBeira-zuntza
Hizlari motaCoaxial, 6.5 Inches
AmpbiziagoaBuilt-in 200 Watt (50 Watts x 4 channels)
KonektibitateaBluetooth, AM/FM Radio
Ezaugarri bereziakIragazgaitza, Irratia
Gailu bateragarriakUTV (Kawasaki Teryx, Polaris Ranger, Yamaha Viking & Rhino, Honda Pioneer 700)
Muntatze MotaBar Mount (adjustable for 51" - 58.75" width)
Neurriak49 x 7 x 11 hazbete
Elementuaren pisua26 kilo
Audio irteera moduaEstereoa
Seinaleen eta zarataren arteko erlazioa90 dB
UPC815172011019

Bermea eta Laguntza

For warranty information and technical support, please refer to the official SSV Works webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzura zuzenean. Gorde erosketa-agiria erosketaren frogagiri gisa berme-erreklamazioetarako.

Erlazionatutako dokumentuak - WP3-UO4LA

Aurreview SSV Works RG4-Q3VRC 3 Speaker RGB LED Audio Kit Installation Guide for 2018-Up Polaris Ranger XP1000 with Ride Command
Comprehensive installation guide for the SSV Works RG4-Q3VRC 3 Speaker RGB LED Audio Kit, designed for the 2018-Up Polaris Ranger XP1000 with Ride Command. Includes parts lists, disassembly, assembly, and wiring instructions.
Aurreview SSV Works RG4-Q3A1 3 Speaker Audio Kit Installation Guide for Polaris Ranger XP1000
Comprehensive installation guide for the SSV Works RG4-Q3A1 3 Speaker Audio Kit Phase 3 with JVC MR1, designed for 2018-Up Polaris Ranger XP1000 models. Includes parts lists, wiring diagrams, and step-by-step instructions for installing speakers, ampbizigarri eta buru unitatea.
Aurreview SSV Works RZ5-PHZ2A Polaris RZR Pro Speaker System Installation Guide
This guide provides comprehensive, step-by-step instructions for installing the SSV Works RZ5-PHZ2A Phase-2 A-Spec 4 Speaker System with JVC MR1 into 2020-2024 Polaris RZR Pro vehicles. It covers panel disassembly, dash kit assembly, speaker pod installation for both dash and rear cage locations, and detailed wiring diagrams.
Aurreview SSV Works RZ4-2ARC Polaris RZR XP Turbo S 2 bozgorailu kitaren instalazio gida
Polaris RZR XP Turbo S-rako SSV Works RZ4-2ARC 2 bozgorailu kitaren instalazio gida pausoz pauso, Kicker bozgorailuak barne. Piezen zerrenda, beharrezko tresnak, bermearen informazioa eta kableatzeko argibide zehatzak barne hartzen ditu. amp erretiluaren instalazioa, bozgorailuen podaren muntaketa eta bateriaren konexioak.
Aurreview SSV Works RZ5-PHZ2A Polaris RZR Pro 4-Speaker System Installation Guide
Detailed installation guide for the SSV Works RZ5-PHZ2A Phase-2 A-Spec 4-Speaker System with JVC MR1 for 2020-2024 Polaris RZR Pro models. Includes parts lists, wiring diagrams, and step-by-step instructions for dash and rear cage pod installation.
Aurreview SSV Works RZ5-Q5A2 5 bozgorailu audio kitaren instalazio gida Polaris RZR Pro XPrako
SSV Works RZ5-Q5A2 5 bozgorailuko audio kitaren instalazio gida osoa, MRB2Rrekin, 2019tik aurrerako Polaris RZR Pro XP modeloetarako. Desmuntatzeko urrats zehatzak barne hartzen ditu, amp plakaren instalazioa, MRB2R konfigurazioa, subwooferren instalazioa, aurreko eta atzeko bozgorailuen pod-aren muntaketa eta kableatua.