Defiant 180 graduko mugimenduaren segurtasun-argiaren erabiltzailearen eskuliburua

Sarrera

Thank you for choosing the Defiant 180 Degree Motion Security Light. This outdoor motion-sensing security light is designed to provide enhanced safety and energy efficiency for your property. It features a wide 180-degree, 70 ft. motion sensor for reliable activation and is Energy Star qualified. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your security light.

Segurtasun Informazioa

Mesedez, irakurri eta ulertu argibide guztiak instalazioa hasi aurretik. Argibide hauek jarraitzen ez badira, deskarga elektrikoak, sua edo lesioak edo ondasunen kalteak eragin ditzaketen beste arrisku batzuk gerta daitezke.

• OHARRA: Deskarga elektrikoa jasateko arriskua. Deskonektatu korrontea fusiblean edo etengailutik instalatu edo zaindu aurretik.
• OHARRA: Risk of fire. Use only PAR38 incandescent (dimmable outdoor wet rated) or select PAR38 dimmable LED outdoor rated-wet rated bulbs. Do not exceed 120 watts per bulb.
• Instalazio-prozesuari buruz ziur ez bazaude, kontsultatu elektrizista kualifikatu batekin.
• Install the fixture in a location suitable for outdoor use, away from flammable materials.
• Ziurtatu konexio guztiak seguru eta behar bezala isolatuta daudela.
• Funtzionamendu-tenperatura tartea: -25 °C (-13 °F) eta +50 °C (+120 °F).

Paketearen edukia

Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:

• Defiant 180 Degree Motion Security Light Fixture
• Muntatzeko hardwarea (torlojuak, kable-azkoinak)
• Argibide eskuliburua
• Note: Bulbs are not included.

Konfigurazioa eta Instalazioa

1. Elementua muntatzea

Choose a suitable mounting location on a wall or eave. The motion sensor works best when mounted 6-10 feet above the ground. Ensure the sensor has an unobstructed view kontrolatu nahi duzun eremuarena.

1. irudia: Aurrealdea view of the Defiant 180 Degree Motion Security Light, showing the two adjustable light heads and the motion sensor unit below.

1. Itzali etengailuaren edo fusibleen kutxan.
2. Remove the existing fixture (if any) and disconnect wiring.
3. Lotu muntatzeko euskarria juntura-kutxan emandako torlojuak erabiliz.
4. Pull the electrical wires through the center hole of the mounting bracket.

2. Kableatu konexioak

Make sure power is still off before proceeding with wiring.

1. Konektatu beltza kablea aparatutik gailuaraino beltza kable (beroa) konexio-kutxatik kable-torloju bat erabiliz.
2. Konektatu zuria kablea aparatutik gailuaraino zuria (neutroa) kablea konexio-kutxatik kable-torloju bat erabiliz.
3. Konektatu berdea edo kobrezko (lurreko) kable biluzi bat aparatutik gailura lurra wire from the junction box using a wire nut.
4. Kontu handiz sartu hari guztiak lotura-kutxan.

3. Lanpara finkatzea eta bonbillak instalatzea

2. irudia: Aldea view of the security light, illustrating the adjustable swivel arms for positioning the light heads and sensor.

1. Lerrokatu euskarria muntatzeko euskarriarekin eta finkatu emandako torlojuekin.
2. Install two PAR38 bulbs (up to 120 watts each, not included) into the sockets. Ensure bulbs are outdoor wet-rated.
3. Adjust the swivel arms and light heads to direct the light as desired.
4. Adjust the motion sensor's field of vision using its adjustable head.

3. irudia: Close-up of a light fixture, showing the protective bulb shield and the textured reflector surface.

Funtzionamendu-argibideak

Once installed, turn on the power at the circuit breaker. The light will enter a warm-up period for approximately 30-60 seconds before becoming fully operational.

Mugimendu-sentsorearen ezarpenak

The motion sensor has adjustable settings, typically located on the bottom or side of the sensor unit.

• Detektatzeko tartea: Adjust the sensitivity to control the detection distance (up to 70 ft.).
• Ordu ezarpena: Select how long the light stays on after motion is detected (e.g., 1 minute, 5 minutes, 20 minutes).
• Iluntzetik iluntzerako ezaugarria: The light automatically deactivates during daylight hours to conserve energy. It will only activate with motion during nighttime.
• AlertFlash: This feature causes the lights to flash when motion is detected before illuminating to full brightness, providing an additional deterrent.
• DualBrite 2-level lighting: Provides energy-saving accent light at half power and full-power security light when motion is detected. (Note: Some models may not include this feature despite product descriptions.)

Refer to the specific labels on your sensor for exact dial positions and functions.

Mantentzea

Regular maintenance ensures optimal performance and extends the life of your security light.

• Garbiketa: Periodically wipe the fixture and sensor lens with a soft, damp oihal bat erabili zikinkeria eta hondakinak kentzeko. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Bonbillaren ordezkoa:
  1. Turn off power at the circuit breaker before replacing bulbs.
  2. Utzi bonbillak guztiz hozten manipulatu aurretik.
  3. Unscrew the old bulb and screw in a new PAR38 incandescent (dimmable outdoor wet rated) or select PAR38 dimmable LED outdoor rated-wet rated bulb (up to 120 watts).
  4. The bulb-saver feature extends bulb life up to 4 times the life of standard bulbs.
• Ikuskapena: Annually inspect wiring for any signs of wear or damage.

Arazoak konpontzea

If your security light is not functioning as expected, refer to the following common issues and solutions:

Zehaztapenak

Bermea eta Laguntza

Defiant products are manufactured to high-quality standards and are warranted to be free from defects in materials and workmanship for a specified period from the date of purchase. For warranty claims or technical support, please refer to the contact information provided on the product packaging or visit the official Defiant webgunea.

Gorde erosketaren egiaztagiria bermearen ondorioetarako.