1. Sarrera
The CyberPower BRG1500AVRLCD Intelligent LCD UPS System is designed to provide reliable battery backup and surge protection for desktop computers, workstations, networking devices, and home entertainment systems. This Uninterruptible Power Supply (UPS) system utilizes line interactive topology and simulated sine wave output to safeguard your valuable electronics from power interruptions and fluctuations.
Key features include Automatic Voltage Regulation (AVR) to correct minor power fluctuations without switching to battery power, thereby extending battery life. It also offers two USB charge ports (2.1 Amps shared) for portable devices.
Figure 1: CyberPower BRG1500AVRLCD UPS System in a typical office environment, providing power protection to connected devices.
2. Segurtasun-neurriak
Please read and follow all safety instructions carefully before installing or operating the UPS. Failure to do so may result in damage to the unit, connected equipment, or personal injury.
- Do not install the UPS in direct sunlight, near heat-emitting appliances, or in areas with excessive humidity.
- Ziurtatu UPSa lurrera konektatutako entxufe batera konektatuta dagoela.
- Ez ireki UPSa.asing. Ez dago erabiltzaileak konpondu beharreko piezarik barruan. Jo ezazu mantentze-lanetarako zerbitzu-langile kualifikatuei.
- Ez erabili UPSa medikuntzarako edo bizi-euskarrirako ekipoetarako.
- Ensure proper ventilation around the UPS. Do not block any ventilation openings.
- In case of fire, use a powder fire extinguisher. Do not use water.
3. Paketearen edukia
Egiaztatu elementu guztiak paketean daudela:
- UPS Unitatea
- Erabiltzailearen eskuliburua
4. Produktua amaitu daview
4.1 Aurreko panela
2. irudia: Aurrealdea view of the CyberPower BRG1500AVRLCD UPS, highlighting the Intelligent LCD panel and USB charging ports.
The front panel features the Intelligent LCD display, control buttons (Display, Mute, Enter, Setup), and two USB charge ports (USB-A and USB-C) for convenient charging of portable devices.
4.2 Atzeko panela
3. Irudia: Atzealdea view of the CyberPower BRG1500AVRLCD UPS, detailing the NEMA 5-15R outlets, network, cable, and serial ports.
The rear panel includes 12 NEMA 5-15R outlets: six battery backup & surge protected outlets and six surge protected outlets. It also features network (RJ45) and cable (Coax) surge protection ports, a serial port, and a USB port for management software connectivity. A circuit breaker reset button is also located on the rear panel.
5. Konfigurazioa
5.1 Hasierako karga
Before initial use, plug the UPS into a grounded wall outlet and allow it to charge for at least 8 hours to ensure maximum battery runtime. The unit will automatically turn on when connected to mains power.
5.2 Lotura ekipoak
- Bateriaren babeskopia eta tentsio-igoeren aurkako babes-entzungailuak: Connect critical equipment such as your computer, monitor, and external hard drives to these outlets. These devices will receive power from the UPS battery during an outage.
- Surge Babestutako Saltokiak: Connect non-critical equipment that still requires surge protection, such as printers or scanners, to these outlets. These devices will not receive battery backup power.
- USB karga-portuak: Use the front USB-A and USB-C ports to charge mobile phones, MP3 players, and cameras.
- Data Line Protection: Connect your network cable (RJ45) and coaxial cable (Coax) through the designated IN/OUT ports on the rear panel to protect against surges.
6. Funtzionamendu-argibideak
6.1 Turning On/Off the UPS
- Pizteko: Press and hold the Power button on the front panel for approximately 2 seconds. The LCD display will light up.
- Desaktibatzeko: Press and hold the Power button for approximately 2 seconds. The LCD display will turn off.
6.2 LCD pantailaren funtzioak
The multifunction LCD panel displays immediate, detailed information on battery and power conditions. Use the 'Display' button to cycle through various screens:
4. irudia: Adibamples of information displayed on the Intelligent LCD panel, including input/output voltage, karga eta bateriaren egoera.
- Sarrera boltage: Uneko bolumena erakusten dutage from the utility power.
- Irteera boltage: liburukia erakusten dutage supplied by the UPS to connected equipment.
- Bateriaren edukiera: Indicates the current charge level of the internal batteries.
- Karga-gaitasuna: ehunekoa bistaratzen dutage of the UPS's capacity being used by connected equipment.
- Aurreikusitako exekuzio-denbora: Provides an estimate of how long the UPS can supply power during an outage based on the current load.
- Gertaeren erregistroa: Records power events such as outages, surges eta voltaggorabeherak.
6.3 Vol. automatikoatagAraudia (AVR)
UPSak Bolumen Automatikoa dutage Regulation (AVR), which automatically corrects minor power fluctuations (sags and overvoltages) without switching to battery power. This extends the life of the battery by reducing the number of times it needs to discharge and recharge.
6.4 PowerPanel Personal Edition Management Software
The UPS comes with FREE PowerPanel Personal Edition Management Software (Download). This software allows for advanced power management features, including scheduled shutdowns, remote monitoring, and customizable alerts. Refer to the software's documentation for installation and usage instructions.
7. Mantentzea
7.1 Bateria ordezkatzea
The CyberPower BRG1500AVRLCD uses two 12V batteries. The batteries are designed to last approximately 3-5 years under normal operating conditions. When the batteries reach the end of their service life, they should be replaced by qualified personnel. For battery replacement, contact CyberPower Systems customer support or a certified technician.
7.2 Garbiketa
Regularly clean the exterior of the UPS with a dry cloth. Ensure ventilation openings are free from dust and debris to maintain proper airflow and prevent overheating.
8. Arazoak
If the UPS is not functioning correctly, refer to the following common issues:
- UPSak ez du pizten: Ensure the power cord is securely plugged into a grounded wall outlet and the UPS. Check the circuit breaker on the rear panel and reset if tripped.
- UPSak etengabe bip egiten du: This usually indicates the UPS is operating on battery power during an outage or a low battery condition. Save your work and shut down connected equipment if the outage luzatua da.
-
Erlazionatutako dokumentuak - BRG1500AVRLCD
CyberPower UPS funtzioen konfigurazio gida
CyberPower LCD UPS Sistemen funtzioak eta konfigurazioak konfiguratzeko gida zehatza, bolumena barne.tagezarpenak, sentikortasuna, alarmak eta pantaila aukerak.
CyberPower BRG1500AVRLCD2 UPS User Manual: Features, Installation, and Operation
Comprehensive user manual for the CyberPower BRG1500AVRLCD2 Intelligent LCD UPS. Learn about its features, installation, basic operation, battery replacement, troubleshooting, and technical specifications.
CyberPower PR750LCD3C UPS Serie Adimendunaren Erabiltzaile Eskuliburua
CyberPower PR750LCD3C UPS Adimendun Seriearen erabiltzailearen eskuliburua, etenik gabeko elikatze-iturri honen instalazioari, funtzionamenduari, segurtasun-abisuei, arazoak konpontzeari eta zehaztapen teknikoei buruzko informazio zehatza ematen duena.
CyberPower Intelligent UPS Series OR1000LCDRM1U/OR1500LCDRM1U User Manual | Power Protection Guide
Comprehensive user manual for CyberPower Intelligent UPS Series (OR1000LCDRM1U, OR1500LCDRM1U). Learn about installation, features, operation, battery replacement, troubleshooting, technical specs, and safety for reliable power protection.
CyberPower Intelligent UPS Series User Manual - CP850/1000/1350/1500AVRLCD
User manual for CyberPower Intelligent UPS Series models CP850AVRLCD, CP1000AVRLCD, CP1350AVRLCD, and CP1500AVRLCD. Covers features, safety, installation, operation, battery replacement, troubleshooting, technical specifications, and GreenPower UPS technology.
CyberPower PR5000RTXL2UC Smart App Sinewave UPS Seriearen Erabiltzaile Eskuliburua
Comprehensive user manual for the CyberPower PR5000RTXL2UC Smart App Sinewave UPS Series. Covers installation, basic and network operation, LCD settings, EPO/ROO configuration, dry contact monitoring, battery replacement, technical specifications, troubleshooting, and warranty information.