Radial Engineering R800 0155

Radial StageBug SB-5W 2-Channel Wall-Mount Stereo Direct Box

Model: R800 0155

1. Sarrera

The Radial StageBug SB-5W is a compact, 2-channel wall-mount stereo direct box designed to convert unbalanced consumer-level audio signals into balanced, professional-level signals. This device is ideal for integrating laptops, smartphones, CD players, and other consumer audio devices into professional sound systems, reducing noise and ensuring optimal audio quality. Its wall-mount design allows for discreet and permanent installation in studios, venues, or control rooms.

2. Segurtasun informazioa

Please read and understand all safety instructions before operating this device. Failure to do so may result in injury or damage to the unit or other equipment.

  • Segurtasun elektrikoa: This unit contains passive components and does not require external power. Ensure all connected equipment is properly grounded to prevent electrical hazards.
  • Instalazioa: Installation should be performed by a qualified professional in accordance with local electrical codes. Ensure the mounting location is secure and free from moisture.
  • Ingurumena: Do not expose the unit to water, excessive moisture, or extreme temperatures. Operate in a well-ventilated area.
  • Garbiketa: Disconnect all cables before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or solvents.
  • Zerbitzua: Ez saiatu unitate hau zeuk konpontzen. Konponketa guztiak zerbitzu-langile kualifikatuei eskatu.

3. Ezaugarri nagusiak

  • Wall-mounted design for permanent installation.
  • Dual isolation transformers for noise reduction.
  • 1/8-inch TRS and L/R RCA input terminals.
  • Front-panel level control.
  • Mono fold-down switch for summing stereo signals.
  • Ground-lift switch to eliminate hum and buzz.
  • Converts unbalanced consumer signals to balanced pro-level outputs.

4. Konfigurazioa eta instalazioa

The Radial StageBug SB-5W is designed for installation into a standard electrical junction box. Professional installation is recommended.

4.1 Instalazio fisikoa

  1. Ensure power is off to the junction box before beginning installation.
  2. Mount the SB-5W into a standard electrical junction box using appropriate screws.
  3. Secure the faceplate to the unit.

4.2 Sarrera iturriak konektatzea

The SB-5W accepts two types of stereo input connections: a 1/8-inch (3.5mm) TRS stereo jack and a pair of RCA (Left/Right) jacks.

Aurrealdea view of the Radial StageBug SB-5W showing input jacks and controls.

Figure 1: Front panel of the Radial StageBug SB-5W with 1/8-inch TRS and RCA inputs.

  • 1/8-inch TRS Input: Connect your laptop, smartphone, or tablet directly to the 1/8-inch TRS input jack.
  • RCA sarrerak: For devices with RCA stereo outputs (e.g., CD players, turntables), connect the Left and Right RCA cables to the corresponding jacks.
Connection diagram showing a laptop connected to the Radial StageBug SB-5W, which then connects to a mixer and speakers.

Figure 2: Connecting a laptop to the SB-5W.

Connection diagram showing a CD player connected to the Radial StageBug SB-5W, which then connects to a mixer and speakers.

Figure 3: Connecting a CD player to the SB-5W.

Connection diagram showing a tablet connected to the Radial StageBug SB-5W, which then connects to a mixer and speakers.

Figure 4: Connecting a tablet to the SB-5W.

4.3 Connecting Outputs to a Mixer/Console

The SB-5W provides balanced outputs via terminal blocks on the rear of the unit. These outputs are designed to be hard-wired to your console or mixing board using standard twisted-pair balanced audio cable.

Atzekoa view of the Radial StageBug SB-5W showing the terminal blocks for balanced audio outputs.

5. Irudia: Atzealdea view showing output terminal blocks.

  1. Connect the balanced audio cables from the SB-5W's output terminal blocks to the appropriate input channels on your mixing console or audio interface.
  2. Ensure correct polarity and channel assignment (Left/Right).

5. Operating the SB-5W

The SB-5W features a level control, a mono fold-down switch, and a ground-lift switch on its front panel for easy access and signal management.

Close-up of the Radial StageBug SB-5W front panel showing Level knob, Mono button, and Lift button.

Figure 6: Front panel controls.

5.1 Level Control

The large knob labeled MAILA adjusts the output volume of the stereo signal. Rotate clockwise to increase the level and counter-clockwise to decrease it. Start with the level at minimum and gradually increase it to achieve the desired output volume without clipping at your mixer.

5.2 Mono Fold-Down Switch

The button labeled MONO, when engaged, sums the left and right stereo input signals into a single mono output. This is useful when feeding a mono sound system or when you need to check for phase issues in a stereo mix. When disengaged, the unit operates in stereo.

5.3 Lurreko igogailu etengailua

The button labeled IGOGAILUA activates the ground-lift function. This switch disconnects the audio ground from the chassis ground, which can help eliminate hum and buzz caused by ground loops between the source device and the connected audio system. If you experience hum, try engaging this switch. If the hum persists, ensure all equipment is properly grounded and check cable connections.

6. Mantentzea

The Radial StageBug SB-5W is a robust and passive device designed for long-term reliability with minimal maintenance.

  • Garbiketa: Periodically wipe the unit's surface with a dry, soft cloth to remove dust. Avoid using abrasive cleaners or solvents, as these can damage the finish and labels.
  • Ikuskapena: Occasionally check all cable connections for secure fit. Ensure the unit is free from physical damage.
  • Ingurumena: Maintain a stable environment, avoiding extreme temperatures, humidity, or direct sunlight, which can shorten the lifespan of electronic components.

7. Arazoak

If you encounter issues with your Radial StageBug SB-5W, refer to the following common problems and solutions:

ArazoaKausa posibleaIrtenbidea
Ez dago soinu irteerarik
  • Kable konexio okerrak
  • Jatorrizko gailuak ez du audioa erreproduzitzen
  • Nahasgailuaren sarrerako irabazia baxuegia da
  • SB-5W level control set to minimum
  • Ziurtatu sarrera eta irteerako kable guztiak ondo konektatuta daudela.
  • Ensure the source device is playing audio and its volume is up.
  • Increase the input gain on your mixer.
  • Adjust the LEVEL knob on the SB-5W clockwise.
Hum edo Buzz
  • Lurraren begizta
  • Kable akastuna
  • Beste ekipo batzuen interferentziak
  • Inplikatu IGOGAILUA (ground-lift) switch on the SB-5W.
  • Saiatu beste audio kable bat.
  • Ziurtatu ekipamendu guztiak behar bezala lurrarekin lotuta daudela.
  • Move the unit or cables away from power transformers or other sources of electromagnetic interference.
Audio distortsionatua
  • Input signal too hot
  • Mixer input gain too high
  • Reduce the output volume from your source device.
  • Reduce the input gain on your mixer.
  • Adjust the LEVEL knob on the SB-5W counter-clockwise.
Only one channel (Left or Right) is working
  • Faulty input cable
  • Mono fold-down switch engaged
  • Problem with source device output
  • Check the stereo input cable (1/8-inch TRS or RCA pair).
  • Ziurtatu MONO switch is disengaged for stereo operation.
  • Test the source device with another stereo input.

If the problem persists after trying these solutions, contact Radial Engineering customer support or a qualified technician.

8. Zehaztapenak

  • Eredua: R800 0155
  • Elementuaren pisua: 0.01 ontza
  • Produktuaren neurriak: 5.1 x 2.85 x 2.15 hazbete
  • Konektore mota: 1/8-inch TRS, RCA
  • Wattage: 5 watts (passive device, refers to maximum signal handling)
  • Sarrerako kanalak: 2 (estereoa)
  • Irteerako kanalak: 2 (Balanced, via terminal blocks)
  • Kontrolak: Level, Mono Fold-Down, Ground Lift
  • Isolatze: Dual isolation transformers

9. Bermea eta laguntza

Radial Engineering products are designed for durability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Radial Engineering website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Radial Engineering customer support directly through their webgune edo zerbitzu-zentro baimenduak.

Sareko baliabideak: For the latest information, FAQs, and support, please visit the Ingeniaritza Erradiala webgunea.

Erlazionatutako dokumentuak - R800 0155

Aurreview Radial StageBug SB-2 Passive Direct Box Quick Start Guide
Quick start guide for the Radial StageBug SB-2, a compact passive direct box for active basses and keyboards. Learn how to connect and use the device with instruments and PA systems, including setup diagrams.
Aurreview Radial JDI Passive Direct Box Erabiltzailearen Gida
Radial JDI zuzeneko kaxa pasiboaren erabiltzailearen gida osoa, bere ezaugarriak, zehaztapenak, aplikazioak eta arazoak konpontzea zehaztuz. Ikasi Jensen transformadoreari, sarrera/irteerako inpedantziari eta audio errendimendu optimoa nola lortu.
Aurreview Radial J48 Active Direct Box erabiltzailearen gida
Radial J48 Active Direct Box-erako erabiltzailearen gida osoa, audio aplikazio profesionaletarako ezaugarriak, funtzioak, zehaztapenak eta bermeari buruzko informazioa zehazten duena.
Aurreview Radial HDI High Definition Studio Direct Box-en erabiltzailearen eskuliburua
Radial HDI High Definition Studio Direct Box-erako erabiltzailearen eskuliburu osoa, audio grabaketa profesionalerako eta zuzeneko emanaldietarako ezaugarriak, konexioak, aurrealdeko eta atzeko paneleko kontrolak, zehaztapenak eta aplikazioak zehaztuz.
Aurreview Radial HotShot MD Stage Mikrofono aldatzailearen erabiltzailearen gida
Radial HotShot MD-ren erabiltzailearen gidatagMikrofono-aldagailua mikrofono dinamikoak aldi baterako hainbat helmugara birbideratzeko diseinatuta dago, abeslarientzako eta taldearen komunikazioarentzako kontrol erraza eskaintzen duena.
Aurreview Radial J+4 Stereo Line Driver User Guide
User guide for the Radial J+4, a stereo line driver and unbalanced to +4dB balanced converter, detailing its features, operation, applications, and specifications.