1. Sarrera
The Behringer iNUKE NU1000 is an ultra-lightweight, high-density 1000-watt power amplifier designed for professional audio applications. This amplifier delivers significant power output while maintaining a compact and efficient design, making it suitable for various sound reinforcement needs. Its advanced Class-D technology ensures reliable performance with minimal thermal buildup.
Ezaugarri nagusiak hauek dira:
- 2 x 500 watt ematen ditu 2 ohmiotan; 2 x 300 watt 4 ohmiotan; 1000 watt 4 ohmiotan (zubi modua).
- Revolutionary cool-running High-Density Class-D technology for ultimate reliability.
- Zarata gabeko audioa eta erantzun iragankor hobea lortzeko etengailu moduko elikatze-iturri ultra-eraginkorra.
- "Zero-Attack" limiters provide maximum output level with reliable overload protection.
- Barneko estereo crossover-a, behe-mozketa, goi-mozketa eta gama osoko moduekin.
2. Segurtasun-argibide garrantzitsuak
Please read and follow all safety instructions before operating this device to prevent electric shock, fire, or injury. Keep these instructions for future reference.
- Energia iturria: Connect the unit only to an AC power outlet that matches the voltage eta maiztasuna atzeko panelean zehaztuta.
- Lurreratzea: Ensure the power cord has a grounding conductor. Do not defeat the safety purpose of the polarized or grounding-type plug.
- Aireztapena: Ez blokeatu aireztapen-irekidurak. Instalatu fabrikatzailearen argibideen arabera. Mantendu nahikoa leku unitatearen inguruan aire-fluxu egokia lortzeko.
- Ura eta hezetasuna: Ez erabili aparatu hau uraren ondoan, ezta tantaka edo zipriztinen eraginpean jarri ere. Ez jarri likidoz betetako objekturik aparatuaren gainean.
- Beroa: Ez instalatu bero-iturri inongo ondoan, esate baterako, erradiadoreak, bero-erregistroak, sukaldeak edo beste aparatu batzuk (barne ampberoa sortzen duten argitzaileak).
- Garbiketa: Garbitu zapi lehor batekin bakarrik.
- Zerbitzua: Jarri zerbitzu-zerbitzu guztiak zerbitzu-pertsonal kualifikatuari. Zerbitzua behar da aparatua edozein modutan hondatu denean, hala nola, elikatze-kablea edo entxufea hondatuta dagoenean, likidoa isuri denean edo objektuak aparatura erori direnean, aparatua euria edo hezetasuna jasan duenean, ez du normalean funtzionatzen. , edo erori egin da.
- Kableak: Use only specified attachments/accessories. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
3. Konfigurazioa eta konexioak
3.1 Desontziratzea eta kokatzea
Carefully unpack the Behringer iNUKE NU1000 amplifier. Inspect the unit for any signs of damage during transit. Place the amplifier in a well-ventilated area, ideally in a standard 19-inch equipment rack. Ensure sufficient space around the unit for proper airflow, especially around the rear fan.
3.2 Aurrealdeko panela gainditzeaview
Figure 3.1: Front panel of the Behringer iNUKE NU1000 ampargitzaile. Hau view shows the power button, channel level controls (CH A and CH B), and status indicators.
The front panel provides access to the main operational controls and indicators:
- Pizteko botoia: Biratzen du ampbiziago edo aktibatuta.
- Channel Level Controls (CH A, CH B): Adjust the output level for each channel.
- Signal/Clip LEDs: Indicate signal presence and clipping (overload) for each channel.
- Power LED: Unitatea pizten denean pizten da.
3.3 Atzeko panelaren konexioak
Figure 3.2: Rear panel of the Behringer iNUKE NU1000 ampargitzaile. Hau view displays the AC power inlet, input connectors (XLR/TRS combo), output connectors (Speakon-compatible), and crossover mode switches.
The rear panel houses all input, output, and power connections:
- AC korrontearen sarrera: Connect the supplied power cord here. Ensure the power source matches the unit's requirements.
- Inputs (CH A, CH B): These are combo XLR/TRS 6.35mm Jack connectors for balanced or unbalanced audio signals from your mixer or audio interface.
- Outputs (CH A, CH B): Speakon-compatible connectors for connecting to your loudspeakers. Ensure correct wiring for stereo or bridge mode.
- Modu aldaketa: Estereo, Paralelo edo Zubi funtzionamendu moduen artean hautatzen du.
- Crossover Switch: Configures the built-in stereo crossover for Low-Cut, High-Cut, or Full Range operation.
3.4 Audio-gailuak konektatzea
- Konektatu audio iturria (adibidez, nahasgailua, aurrebista)amplifier)-ri Input CH A eta Input CH B using appropriate XLR or 6.35mm TRS cables.
- Konektatu bozgorailuak Output CH A eta Output CH B using Speakon-compatible cables. Ensure the impedance of your speakers matches the amplifier's capabilities (2 Ohms, 4 Ohms, or 8 Ohms).
- Ezarri Modu aldatzailea to your desired operation (Stereo for two separate channels, Bridge for mono high-power output).
- Egokitu Crossover Switch based on your speaker setup. Use "Full Range" for full-range speakers, "Low-Cut" for subwoofers, or "High-Cut" for mid/high frequency speakers.
- Konektatu korronte kablea AC korronte hartunea and then to a grounded electrical outlet.
4. Funtzionamendua Ampbiziagoa
4.1 Piztu/Itzaltzea
- Before powering on, ensure all level controls on the amplifier and your audio source are set to their minimum positions.
- Sakatu Pizteko botoia on the front panel. The Power LED will illuminate.
- To power off, first reduce all levels, then press the Pizteko botoia.
4.2 Mailak doitzea
Gradually increase the level controls on your audio source, then slowly raise the Channel Level Controls (CH A, CH B) gainean amplifier until the desired volume is achieved. Monitor the Signal/Clip LEDs:
- Seinale LED: Indicates that an audio signal is present.
- Kliparen LEDa: If this LED illuminates frequently or stays lit, it indicates that the signal is too strong and clipping is occurring. Reduce the input level from your source or the amplifier's channel level to prevent distortion and potential speaker damage. The "Zero-Attack" limiters are designed to provide reliable overload protection, but continuous clipping should be avoided.
4.3 Gurutzaketa ezarpenak
The built-in stereo crossover allows for flexible system configuration:
- Sorta osoa: Passes the entire audio spectrum to the speakers. Suitable for full-range loudspeakers.
- Baxua: Filters out high frequencies, sending only low frequencies to the speakers. Ideal for subwoofers.
- Ebaki altua: Filters out low frequencies, sending only high frequencies to the speakers. Suitable for mid/high frequency speakers.
Adjust the crossover switch on the rear panel according to your speaker setup and desired sound reproduction.
5. Mantentzea
Proper maintenance ensures the longevity and optimal performance of your Behringer iNUKE NU1000 ampbiziagoa.
- Garbiketa: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or solvents.
- Aireztapena: Regularly check that the ventilation openings, especially the rear fan, are free from dust and obstructions. Blocked vents can lead to overheating and reduced performance.
- Kableen ikuskapena: Periodically inspect all audio and power cables for damage. Replace any frayed or damaged cables immediately.
- Biltegiratzea: gordez gero amplifier for an extended period, ensure it is in a dry, dust-free environment.
6. Arazoak
This section addresses common issues you might encounter with your iNUKE NU1000 ampbiziagoa.
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Botererik ez | Kable elektrikoa ez dago konektatuta; Entxufea akastuna; AmpLifter-aren etengailua itzalita. | Ensure power cord is securely connected. Test the power outlet. Press the power button on the front panel. |
| Ez dago soinu irteerarik | Input cables disconnected; Output cables disconnected; Channel level controls at minimum; Source device not sending signal; Incorrect mode selection. | Check all input and output cable connections. Increase channel level controls. Verify audio source is active. Ensure Mode switch is set correctly (Stereo/Bridge). |
| Distorted sound / Clipping LED constantly on | Sarrerako seinalea altuegia; Amplifier output overloaded; Speaker impedance mismatch. | Reduce the input level from your audio source. Lower the amplifier's channel level controls. Ensure speaker impedance is within the amplifier-aren zehaztutako barrutia. |
| Haizagailuaren zarata gehiegi | Dust buildup in fan/vents; Unit operating in a hot environment; Fan malfunction. | Clean fan and ventilation openings. Ensure adequate airflow around the unit. If noise persists and is abnormal, contact qualified service personnel. |
7. Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Eredua | NU1000 |
| Irteera Wattage | 1000 Watts (Bridge Mode into 4 Ohms); 2 x 500 Watts (2 Ohms); 2 x 300 Watts (4 Ohms) |
| Elementuaren pisua | 6.61 libra (gutxi gorabehera 3.0 kg) |
| Produktuaren neurriak (L x W x H) | 19.02 x 9.76 x 3.5 hazbete (gutxi gorabehera 48.3 x 24.8 x 8.9 cm) |
| Konektore mota | 6.35mm Jack (Inputs), Speakon-compatible (Outputs) |
| Material Mota | Metala |
| Energia iturria | Kable elektrikoa |
| Kolorea | Black (with silver/grey chassis) |
8. Bermea
Behringer products are designed and manufactured to the highest quality standards. For detailed warranty information, including terms and conditions, please refer to the warranty statement provided with your product or visit the official Behringer webgunea. Gorde erosketaren egiaztagiria berme-erreklamazioetarako.
9. Laguntza
If you encounter issues not covered in this manual or require further assistance, please contact Behringer customer support. You can find contact information and additional resources on the official Behringer website. Please have your product model (NU1000) and serial number ready when contacting support.
Sareko baliabideak: For the latest drivers, software, and product information, visit www.behringer.com.
