1. Segurtasun Jarraibide Orokorrak
Irakurri eta ulertu beti tresna elektriko honekin batera datozen segurtasun-abisu, argibide, ilustrazio eta zehaztapen guztiak. Jarraian zerrendatutako argibide guztiak ez betetzeak deskarga elektrikoa, sua eta/edo lesio larriak eragin ditzake.
- Lan eremuko segurtasuna: Mantendu zure lan-eremua garbi eta ondo argiztatuta. Gune nahasi edo ilunetan istripuak gerta daitezke. Ez erabili tresna elektrikorik leherketa-atmosferan, hala nola likido, gas edo hauts sukoien aurrean.
- Segurtasun elektrikoa: Erreminta elektrikoen entxufeak entxufearekin bat etorri behar dira. Ez aldatu inoiz entxufea inola ere. Ez erabili kablea gaizki. Ez erabili inoiz kablea erreminta elektrikoa eramateko, tiratzeko edo deskonektatzeko. Mantendu kablea berotik, oliotik, ertz zorrotzetatik edo mugitzen diren piezen ondoan.
- Segurtasun pertsonala: Always wear eye protection, dust mask, non-skid safety shoes, hard hat, or hearing protection for appropriate conditions. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Tresnaren erabilera eta zaintza: Ez behartu tresna elektrikoa. Erabili zure aplikaziorako tresna elektriko egokia. Deskonektatu entxufea energia-iturritik doikuntzak egin, osagarriak aldatu edo tresna elektrikoak gorde aurretik.
- Specific Miter Saw Safety: Ziurtatu pieza ondo dagoela clamped before cutting. Keep hands clear of the cutting area and the blade. Allow the blade to reach full speed before beginning a cut.
2. Produktua amaitu daview eta Osagaiak
The Einhell TC-MS 2513 L Miter Saw is designed for precise and efficient cutting tasks. Familiarize yourself with its key components for safe and effective operation.
2.1. irudia: Orokorrean view of the Einhell TC-MS 2513 L Miter Saw, showcasing its compact and robust design with the dust collection bag attached.
2.2. irudia: A user demonstrating the proper stance and operation of the miter saw for cutting a wooden workpiece.
2.3. irudia: Gertutik view of the integrated laser guide, projecting a precise line onto the workpiece for accurate cutting alignment.
2.4. irudia: The adjustable X-Tend supports, designed to provide stable support for longer workpieces during cutting operations.
2.5. irudia: Illustration of the saw head tilting mechanism, allowing for easy adjustment to achieve precise miter cuts.
2.6. irudia: A close-up of the high-quality carbide-tipped saw blade, designed for clean and powerful cuts.
Funtsezko osagaiak:
- Swivel Plate: High-quality base with exact angle adjustment for angular cuts.
- Saw Head: Can be tilted to the left for miter cuts.
- Laser gida: Mains-powered laser marks the cutting line for quick and precise positioning.
- Clampgailua: Robust mechanism to securely fix workpieces.
- X-Tend Supports: Adjustable supports for processing long workpieces.
- Integrated Stop: Ensures precise and repeatable cuts.
- Zerra-xafla: Superior quality carbide-tipped blade for clean and powerful cutting.
- Hautsa biltzeko poltsa: Effective for maintaining a clean workplace by collecting sawdust.
- Eramateko heldulekua: For simple and safe transportation of the tool.
3. Konfigurazioa
Before operating the miter saw, ensure it is properly set up and secured.
- Despaketatzea eta ikuskatzea: Carefully remove the saw from its packaging. Inspect all components for any damage that may have occurred during transit. Ensure all listed parts are present.
- Mounting the Saw: For stable operation, it is recommended to mount the miter saw to a workbench or a stable stand using appropriate fasteners.
- Attaching the Dust Bag: Connect the provided dust collection bag to the dust extraction port on the saw. Ensure it is securely fastened to effectively collect sawdust during operation.
- Adjusting X-Tend Supports: Extend the X-Tend supports as needed to provide adequate support for the length of your workpiece. These supports can be adjusted with one hand.
- Potentzia-konexioa: Connect the saw's power cord to a suitable 230V power outlet. Ensure the power switch is in the OFF position before plugging in.
4. Funtzionamendu-argibideak
Follow these steps for safe and effective operation of your Einhell TC-MS 2513 L Miter Saw.
- Workpiece Placement: Place the workpiece firmly against the fence and on the saw table.
- Securing the Workpiece: Use the robust clamping device to securely fix the workpiece in place. This is crucial for preventing movement during cutting and ensuring safety.
- Setting the Cutting Angle (Miter Cut):
- Loosen the locking handle for the swivel plate.
- Rotate the swivel plate to the desired angle, indicated on the scale. The high-quality swivel plate allows for exact angle adjustment.
- Lock the swivel plate in position with one hand.
- Setting the Bevel Angle (Tilt Cut):
- To make miter cuts, the saw head can be tilted to the left.
- Adjust the tilt angle as required and secure it.
- Using the Laser Guide: Activate the mains-powered laser. The laser line will project onto your workpiece, indicating the precise cutting path. Use this guide for quick and accurate positioning.
- Ebaketa egitea:
- Ensure the area around the blade is clear of obstructions and your hands.
- Press the power switch to start the saw. Allow the blade to reach its full operating speed (4000 rpm) before beginning the cut.
- Slowly and steadily lower the saw blade through the workpiece. Do not force the saw.
- Ebaketa amaitutakoan, askatu etengailua eta utzi xafla erabat gelditzen zerraren burua altxatu aurretik.
- Using the Integrated Stop: For repetitive cuts of the same length, utilize the integrated stop feature to ensure consistent and precise results.
4.1. irudia: Diagram illustrating various cutting angles and their corresponding maximum cutting capacities (e.g., 90°x90°: 130x75 mm, 45°x45°: 95x35 mm).
5. Mantentzea
Regular maintenance ensures the longevity and optimal performance of your miter saw.
- Garbiketa: After each use, disconnect the saw from the power supply. Clean the saw thoroughly, especially around the blade guard, table, and dust collection port, to remove sawdust and debris. The sawdust collection bag should be emptied regularly.
- Pala ikuskatzea eta ordezkatzea: Regularly inspect the carbide-tipped saw blade for sharpness and damage. A dull or damaged blade can lead to poor cuts and increased strain on the motor. Replace the blade when necessary, following the instructions in your detailed product manual for safe blade removal and installation.
- Lubrifikazioa: Periodically lubricate moving parts as recommended in the full product manual to ensure smooth operation.
- Kableen ikuskapena: Check the power cord for any signs of damage, cuts, or fraying. Replace damaged cords immediately by a qualified professional.
6. Arazoak
Atal honek zure inguratzaile-zerrarekin izan ditzakezun arazo ohikoenak jorratzen ditu.
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Zerra ez da hasten | No power supply; Faulty switch; Motor overload protection activated | Egiaztatu konexio elektrikoa; Jarri harremanetan zerbitzu-zentroarekin; Utzi motorra hozten |
| Ebaki zehaztugabeak | Dull blade; Incorrect angle setting; Workpiece not clamped modu seguruan | Replace blade; Re-adjust angle precisely; Secure workpiece firmly with clampgailua |
| Excessive dust/chips | Dust bag full or improperly attached; Clogged dust port | Empty and reattach dust bag; Clear any blockages in the dust port |
| Saw blade binds in workpiece | Workpiece not supported; Forcing the cut; Dull blade | Use X-Tend supports; Do not force, let saw do the work; Replace blade |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact Einhell customer support.
7. Zehaztapenak
Technical data for the Einhell TC-MS 2513 L Miter Saw:
7.1. irudia: Icon indicating a blade diameter of 250 mm and 48 teeth.
7.2. irudia: Icon representing the integrated laser guide feature.
7.3. irudia: Icon indicating a maximum cutting width of 130 mm.
7.4. irudia: Icon indicating a maximum cutting height of 75 mm.
- Eredua: TC-MS 2513 L
- Modelo zenbakia: 4300850
- Potentzia sarrera: 1200 Watt
- liburukiatage: 230 Volt
- Kargarik gabeko abiadura: 4000 bira/min
- Zerra-orriaren diametroa: 250 mm
- Hortz kopurua: 48
- Max. Ebaketa-zabalera: 120 mm (at 90°)
- Gehienez Ebaketa sakonera: 75 mm (at 90°)
- Neurriak (L x W x H): 73 x 66.8 x 52.5 cm
- Pisua: 9.75 kilogramo
- Kablearen luzera: 1.4 metro
- Heldulekuaren materiala: Polipropilenoa
- Ezaugarri bereziak: Depth adjustment, Laser, X-Tend supports
- Dakarten osagaiak: 1 Miter Saw, 1 Saw Blade, 1 Dust Bag
8. Bermea eta Laguntza
Einhell is committed to the quality and longevity of its products.
- Berme Hedatua: In addition to the standard warranty, Einhell offers an extended 3-year warranty on all Einhell devices upon online registration. To activate this extended service, products must be registered on the official Einhell webgunean erosi eta 30 eguneko epean.
- Bezeroarentzako laguntza: For further assistance, technical support, or spare parts, please visit the official Einhell webwebgunean edo jarri harremanetan bere bezeroarentzako arreta zerbitzuarekin.
8.1. irudia: Badge indicating the 3-year warranty available upon online registration.
