Bosch Professional Tripode BT 150 Instrukzio eskuliburua

Sarrera

This manual provides essential information for the safe and efficient use of your Bosch Professional Tripod BT 150. Designed for stability and precision, this aluminum tripod is compatible with various Bosch lasers and levels featuring a 1/4-inch thread. Please read these instructions carefully before initial operation and keep them for future reference.

1. Konfigurazioa

1.1 Tripodea zabaltzea

1. Jarri tripodea gainazal lau eta egonkor batean.
2. Gently spread the tripod legs outwards until they are fully extended and stable.
3. Ensure the leg braces are securely locked into position to prevent accidental collapse.

Image: Bosch BT 150 Tripod in its unfolded state, ready for use.

1.2 Tripodearen altuera doitzea

1. Hanka luzatzea: Desblokeatu clamps on each leg section. Extend the legs to the desired height (between 55 cm and 157 cm). Securely close the clamps to lock the legs in place.
2. Erdiko zutabearen doikuntza: Use the crank handle to precisely raise or lower the center column for fine height adjustments.

Image: Hands adjusting the leg clamps to extend the tripod legs.

Image: Hands operating the crank handle to adjust the height of the tripod's center column.

1.3 Mounting a Device

1. The tripod head features a 1/4-inch mounting screw.
2. Attach your laser or level securely to the mounting screw on the tripod head. Ensure it is tightened firmly to prevent movement.

Image: A hand securing a device onto the 1/4-inch mounting screw of the tripod head.

2. Tripodea erabiltzea

2.1 Leveling the Device

• The tripod head includes a circular vial (bubble level) for accurate leveling.
• Adjust the tripod legs and/or the center column until the bubble in the circular vial is centered, indicating a level surface for your laser or level.

Image: Bosch BT 150 Tripod with a Bosch laser level mounted, demonstrating its use.

2.2 Pan and Tilt Adjustments

• Use the pan handle to smoothly rotate the mounted device horizontally (panning).
• Loosen the tilt knob to adjust the vertical angle of the device (tilting). Tighten the knob to secure the desired angle.

3. Mantentzea

• Garbiketa: Garbitu tripodea zapi leun batekin,amp cloth after each use to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
• Biltegiratzea: Store the tripod in a dry, clean environment. Collapse the legs and center column fully for compact storage.
• Ikuskapena: Aldian-aldian ikuskatu cl guztiakamps, screws, and moving parts for wear or damage. Ensure all components are functioning correctly before use.

4. Arazoak

4.1 Center Column Crank Not Adjusting Height

If the crank handle turns but the center column does not adjust, the internal gear may be stripped. This often occurs if the thumb screw (which locks the telescoping pole) is tightened before attempting to adjust the height with the crank. Always loosen the thumb screw before using the crank for height adjustment. If the gear is stripped, replacement parts may not be readily available, and manual adjustment of the pole might be necessary.

5. Zehaztapenak

6. Bermea eta Laguntza

The Bosch Professional Tripod BT 150 comes with a 3 urteko bermea if registered. For detailed warranty information, product support, or service inquiries, please visit the official Bosch webgunearekin edo jarri harremanetan Bosch bezeroarentzako arreta-zerbitzuarekin.

For additional information and product registration, please refer to the official Bosch webgunea: www.bosch-professional.com