1. Sarrera
Thank you for choosing the iBeam TE-CSC Chrome Push-in Camera. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new vehicle backup camera. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
The iBeam TE-CSC is designed to enhance parking accuracy and help avoid obstacles when reversing, offering a wide 170-degree view. Its durable, water-resistant chrome housing ensures longevity and a sleek appearance.
2. Segurtasun informazioa
- Always disconnect the vehicle's battery before performing any electrical work to prevent short circuits and electrical shock.
- Ensure all wiring is properly insulated and secured to prevent damage from vibration, heat, or moisture.
- Ez oztopatu gidariaren view or interfere with the operation of any vehicle controls or safety features during installation.
- This camera is an aid for reversing and parking; it does not replace the need for careful driving and direct observation of surroundings.
- Instalazio prozesuaren edozein atalen inguruan ziur ez bazaude, kontsultatu instalatzaile profesional bati.
3. Paketearen edukia
Mesedez, egiaztatu paketea elementu hauek dituen:
- iBeam TE-CSC Chrome Push-in Camera
- 22.5 mm-ko zulo-zerra
- Elikatze kablea
- 20-foot Video Cable (RCA type)
- Argibide eskuliburua
Image 1: iBeam TE-CSC Chrome Push-in Camera with its main components, including the camera unit, power cable, video cable, and hole saw.
4. Konfigurazioa eta instalazioa
The iBeam TE-CSC camera is designed for a push-in installation, typically above the rear license plate, mimicking an OEM camera setup. The camera is pre-set at a 45-degree angle for optimal viewing.
- Aukeratu muntatzeko kokapena: Identify a suitable flat surface above the rear license plate where the camera can be flush-mounted. Ensure there is enough space behind the mounting surface for the camera body and wiring.
- Zulatzeko zuloa: Use the included 22.5mm hole saw to drill a precise hole at the chosen mounting location. Ensure the hole is clean and free of burrs.
- Txertatu kamera: Carefully push the camera into the drilled hole until it sits flush with the mounting surface. Ensure the camera's lens is oriented correctly (facing downwards and outwards).
- Konektatu energia: Connect the camera's power cord to the vehicle's reverse light circuit. This will ensure the camera activates automatically when the vehicle is put into reverse. Connect the red wire to the positive (+) lead of the reverse light and the black wire to a chassis ground (-).
- Konektatu bideo-kablea: Route the 20-foot RCA video cable from the camera to your compatible monitor or head unit. Ensure the cable is securely routed away from moving parts, heat sources, and sharp edges. Connect the yellow RCA connector from the camera to the video input of your monitor.
- Proba sistema: Reconnect the vehicle's battery. Turn on the vehicle and engage reverse gear to test the camera's functionality. Adjust the camera's position slightly if needed (though it's fixed at 45 degrees, ensure the housing is seated correctly).
Oharra: For vehicles with complex wiring or if you are uncomfortable with electrical connections, professional installation is recommended.
5. Funtzionamendu-argibideak
The iBeam TE-CSC camera operates automatically in conjunction with your vehicle's reverse gear and compatible monitor.
- Aktibazio automatikoa: When the vehicle's transmission is shifted into reverse, the camera will automatically power on and transmit video to the connected monitor.
- ViewAngelua: The camera provides a wide 170-degree field of view, offering a comprehensive perspective of the area behind your vehicle.
- Aparkatzeko laguntza: Use the displayed image on your monitor to assist with parking maneuvers and to identify obstacles that may not be visible in your mirrors.
- Desaktibazioa: When the vehicle is shifted out of reverse, the camera will automatically power off, and your monitor will return to its previous display mode.
6. Mantentzea
To ensure the longevity and clear performance of your iBeam TE-CSC camera, follow these simple maintenance guidelines:
- Lenteen garbiketa: Aldian-aldian garbitu kameraren lentea zapi leun eta lehor batekinamp cloth to remove dirt, dust, or water spots. Avoid abrasive cleaners or materials that could scratch the lens.
- Etxebizitza ikuskatzea: Regularly inspect the camera housing for any signs of damage or loose connections. The chrome finish is designed to withstand elements, but extreme conditions may require more frequent checks.
- Kablearen egiaztapena: Ensure all cables remain securely connected and are not exposed to excessive tension or abrasion.
7. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| No image on monitor when in reverse. |
|
|
| Irudia distortsionatuta edo keinuka dago. |
|
|
| Camera lens is foggy or blurry. |
|
|
8. Zehaztapenak
| Modelo zenbakia | TE-CSC |
| Marka | iBeam |
| Fabrikatzailea | iBeam USA |
| Produktuaren neurriak | 40.5 x 17 x 8.5 hazbete (ontziratzeko/bidaltzeko neurriak) |
| Elementuaren pisua | 3.76 pounds (packaging/shipping weight) |
| Sentsore Optikoen Teknologia | CMOS |
| Sentsore optikoaren tamaina | 1/4 hazbetekoa |
| Lente mota | Fixed, Wide Angle |
| angelu erreala View | 170 gradu |
| Eremua View | 170 gradu |
| Instalazio mota | Surface Mount (Push-in) |
| Konektore mota | RCA |
| Gailu bateragarriak | Monitorea |
| Bistaratzeko beste ezaugarri batzuk | Wireless (Note: This might refer to compatibility with wireless video transmitters, but the product includes a 20ft video cable, implying wired connection for this specific model. Clarification needed if "Wireless" refers to a feature of the camera itself or a compatible accessory.) |
9. Bermea eta Laguntza
For warranty information and technical support, please contact iBeam USA directly. Details are typically provided with your product packaging or can be found on the official iBeam USA webgunea.
When contacting support, please have your product model number (TE-CSC) and purchase date available.
