Wohler 8440 HBF 420 Hezetasun-neurgailuaren erabiltzailearen eskuliburua

1. Sarrera

The Wohler HBF 420 Moisture Meter is a versatile hand-held instrument designed to assess moisture content in various materials. It uniquely combines electrical resistance and dielectric measurement techniques, making it ideal for quickly assessing moisture profiles in building materials and precisely determining moisture content in wood. This manual provides comprehensive instructions for the safe and effective use of your device.

2. Segurtasun informazioa

Please read all safety instructions carefully before operating the device. Failure to follow these instructions may result in injury or damage to the meter.

• Ez jarri gailua muturreko tenperatura, hezetasun edo eguzki-argitara.
• Mantendu gailua eremu magnetiko indartsuetatik urrun.
• Ez saiatu gailua zeuk irekitzen edo konpontzen. Mantendu konponketa guztiak langile kualifikatuen esku.
• Ensure the measurement pins are clean and free from debris before use.
• Handle the measurement pins with care to avoid injury.
• Bota bateriak tokiko araudiaren arabera.

3. Produktua amaitu daview

The Wohler HBF 420 is designed for ease of use and accurate measurements. Key features include:

• Dual measurement techniques: Dielectric for quick assessment and Resistance for precise wood moisture.
• Automatic temperature compensation for accurate readings.
• Pantaila digital argia.

3.1. irudia: Wohler HBF 420 Moisture Meter. This image shows the blue meter with its protective cap removed, revealing the digital display, control buttons (SET, M, power), and the two sharp measurement pins at the bottom. The display shows "16".

3.2. irudia: Using the Wohler HBF 420 Moisture Meter. A hand is shown holding the blue meter against a concrete surface, demonstrating its application for measuring moisture in building materials. The display shows "8.9".

4. Konfigurazioa

4.1 Bateriaren instalazioa

The Wohler HBF 420 requires 4 AAA batteries for operation.

1. Bilatu bateriaren konpartimentuaren estalkia gailuaren atzealdean.
2. Irristatu edo askatu estalkia konpartimentua irekitzeko.
3. Sartu 4 AAA pila, konpartimentuaren barruan adierazten den polaritate zuzena (+/-) ziurtatuz.
4. Jarri bateriaren konpartimenduaren estalkia ongi.

4.2 Hasierako piztea

Sakatu pizteko botoia (⏻) to turn on the device. The display will illuminate and show a brief startup sequence.

5. Funtzionamendu-argibideak

5.1 Selecting Measurement Mode

The HBF 420 supports two primary measurement techniques:

• Dielectric Measurement: For quick assessment of moisture in building materials. This mode uses the sensor on the back of the device.
• Erresistentzia neurketa: For precise determination of moisture content in wood using the integrated pins.

Erabili M button to toggle between measurement modes. The display will indicate the active mode.

5.2 Neurketa bat egitea

1. For Dielectric Measurement: Place the back of the device flat against the surface of the material you wish to measure. Ensure full contact. The reading will appear on the display.
2. For Resistance Measurement (Wood): Carefully press the two measurement pins into the wood surface. Ensure both pins penetrate the material. The moisture content will be displayed.
3. Read the value on the digital display.

5.3 Tenperatura-konpentsazioa

For accurate resistance measurements in wood, the device offers automatic temperature compensation. Enter the material temperature using the EZARTU button and navigation controls (if available, based on typical Wohler interfaces, assuming the SET button is for settings/calibration). Refer to the on-screen prompts for specific temperature input procedures.

5.4 Alarma funtzioa

The device features an alarm function (indicated by "ALARM" on the device). Consult the device's on-screen menu or specific button functions to set or adjust alarm thresholds for moisture levels.

6. Mantentzea

6.1 Garbiketa

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the measurement pins are clean and free of residue after each use.

6.2 Biltegiratzea

When not in use, store the Wohler HBF 420 in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.

7. Arazoak

8. Zehaztapenak

9. Bermea eta Laguntza

For warranty information and technical support, please contact Wohler customer service directly. Refer to the product packaging or the official Wohler webharremanetarako datuak lortzeko gunea.

Wohler Webgunea: www.wohler.com