Progress Lighting P6071-31 Outdoor Wall Lantern Instruction Manual

Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of your Progress Lighting P6071-31 outdoor wall lantern. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety.

For your safety, always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.

Segurtasun Informazioa

OHARRA: Always turn off power at the main circuit breaker before installing, cleaning, or servicing this fixture. Failure to do so may result in serious injury or death.

KONTUZ: Produktu hau instalazio-kode aplikagarriaren arabera instalatu behar du produktuaren eraikuntza eta funtzionamendua eta dakartzan arriskuak ezagutzen dituen pertsona batek.

GARRANTZITSUA: Inspect wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire's insulation, do not attempt installation. Contact customer service.

This fixture is designed for outdoor use and is suitable for wet locations. Ensure all connections are properly sealed to prevent water intrusion.

Paketearen edukia

Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela.

Light Fixture Assembly
Mounting Hardware Kit (screws, wire nuts, mounting strap)
Instalazio-argibideak

Diagram showing all components included in the package for the outdoor wall lantern.

1. Irudia: Lehertuta view of the P6071-31 outdoor wall lantern components.

Zehaztapenak

Atributua	Balioa
Marka	Aurrerapen Argiztapena
Eredua	P6071-31
Kolorea	Beltza
Materiala	Aluminioa
Estiloa	Tradizionala
Argi-tresnaren forma	Horma
Neurriak (gutxi gorabehera)	Height: 9-1/8", Width: 5-1/2", Depth from wall: 6-1/2"
Bonbilla mota	Incandescent, 100W Medium Base (Max)
liburukiatage	120V
Kokapenaren balorazioa	cCSAus Wet location listed

Dimensional drawing of the Progress Lighting P6071-31 outdoor wall lantern showing height, width, and depth measurements.

Figure 2: Product dimensions for the P6071-31 fixture.

Konfigurazioa eta Instalazioa

Before you begin, ensure the power is turned off at the circuit breaker. This fixture is designed for wall mounting over a standard 4" hexagonal recessed outlet box.

Prepare the Mounting Strap: Attach the mounting strap to the outlet box using the provided mounting screws. Ensure the strap is securely fastened.
Egin konexio elektrikoak:
- Connect the bare copper or green ground wire from the fixture to the green ground screw on the mounting strap.
- Connect the white wire from the fixture to the white (neutral) supply wire using a wire nut.
- Connect the black wire from the fixture to the black (hot) supply wire using a wire nut.
- Sartu arretaz hari guztiak irteerako kaxan.
Muntatu aparatua: Align the fixture with the mounting strap and secure it with the provided mounting screws. Ensure the fixture is flush against the wall and sealed to prevent water entry, especially in wet locations.
Instalatu bonbilla: Screw in a medium base incandescent bulb (max 100W) into the socket. Do not overtighten.
Berrezarri boterea: Piztu berriro etengailu nagusian.

Detailed diagram showing the electrical wiring connections and mounting steps for the outdoor wall lantern.

Figure 3: Installation diagram for the P6071-31 outdoor wall lantern.

Funtzionamendu-argibideak

Once installed and power is restored, the fixture can be operated via the wall switch connected to the circuit. This fixture does not include a built-in switch or sensor.

Ensure the light bulb is securely screwed into the socket.
Erabili hormako etengailu estandar bat argia pizteko edo itzaltzeko.
For optimal performance and longevity, use bulbs within the specified wattagbarrutia.

Mantentzea

Regular maintenance will help preserve the appearance and functionality of your outdoor wall lantern.

Garbiketa: To clean the fixture, turn off the power at the circuit breaker. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass. For glass panels, a mild glass cleaner can be used.
Bonbillaren ordezkoa: Turn off the power at the circuit breaker and allow the bulb to cool before replacing. Unscrew the old bulb and screw in a new medium base incandescent bulb (max 100W). Do not exceed the maximum wattage.
Ikuskapena: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Ensure the seal around the mounting surface remains intact to prevent water intrusion.

Gertutik view of the Progress Lighting P6071-31 outdoor wall lantern, highlighting the black finish and clear water glass panels.

Figure 4: The P6071-31 fixture, showing details of the finish and glass for cleaning reference.

Arazoak konpontzea

Zure gailuarekin arazoak badituzu, jo ezazu honako arazo eta irtenbide ohikoenei:

Arazoa	Kausa posiblea	Irtenbidea
Argia ez da pizten.	Zirkuitu-hauslean argindarra moztuta dago. Hari-konexio solteak. Bonbilla akastuna. Hormako etengailu akastuna.	Check circuit breaker and ensure it is in the "ON" position. Turn off power, check all wire connections and tighten if necessary. Ordeztu bonbilla berri batekin, funtzionatzen duen batekin. Consult a qualified electrician to check the switch.
Argi distira.	Bonbilla soltea. Hari-konexio solteak. Bonbilla mota/watt okerratage.	Estutu bonbilla entxufean. Turn off power, check and tighten wire connections. Ensure bulb is correct type and wattage (gehienez 100W-ko goritasun-bonbila).
Aparatuaren burrunba.	Muntaketa soltea. Argi-erregulatzaile bateraezina (hala badagokio).	Ensure fixture is securely mounted to the outlet box. If using a dimmer, ensure it is compatible with incandescent loads.

Bermea eta Laguntza

Produktu hau a 1 urteko berme mugatua from the date of purchase. This warranty guarantees your complete satisfaction and includes professional after-sales customer service support.

For warranty claims, technical assistance, or any questions regarding your Progress Lighting P6071-31 fixture, please contact Progress Lighting customer service. Please have your model number (P6071-31) and proof of purchase ready when contacting support.

You can find more information and contact details on the official Progress Lighting webgunea: www.progresslighting.com

	Progress Lighting 8715, 8718 Muntaketa eta Instalazio Argibideak Progress Lighting lanpara esekigarriak, 8715 eta 8718 modeloak, muntatu eta instalatzeko urratsez urratseko gida, kableatzeko argibideak eta segurtasun-abisuak barne.
	Progress Lighting P560341/P560342/P560343 1-LT Outdoor Wall Lantern Installation Guide Detailed installation instructions and safety information for the Progress Lighting P560341, P560342, and P560343 1-Light Outdoor Wall Lantern. Includes package contents, hardware list, assembly steps, care instructions, and warranty information.
	Progress Lighting 7206EB Muntaketa eta Instalazio Argibideak Progress Lighting 7206EB sabaiko lanpara fluoreszentearen muntaketa eta instalazio gida zehatza, segurtasun-abisuak, piezen identifikazioa eta ingelesez, gaztelaniaz eta frantsesez urratseko argibideak barne.
	Progress Lighting P400395 6-Light Chandelier Assembly Instructions Comprehensive assembly and installation guide for the Progress Lighting P400395 6-Light Chandelier. Features package contents, hardware details, safety precautions, and step-by-step installation procedures.
	Progress Lighting P500284-031 Atwell sabaiko lanpara - Ezaugarriak eta gehiagoview Ezagutu Progress Lighting P500284-031 Atwell lanpara zintzilikaria. Dokumentu honek zehaztapenak, ezaugarriak eta instalazio xehetasunak eskaintzen ditu, sarrera, sukalde eta jantokietarako aproposa.
	Progress Lighting Hartwick P710087-009 Nikel eskuilatuzko hormako lampa Progress Lighting Hartwick P710087-009 horma-lanpararen zehaztapen zehatzak, nikelezko akabera eskuilatua, opalozko beira grabatua, ADA betetzen duena eta barrualde modernoetarako egokia dena. Neurriak, xehetasun elektrikoak eta muntaketa barne hartzen ditu.

Aurrerapen Argiztapena P6071-31