Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount with AC Module Instruction Manual

Sarrera

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount with AC Module. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Image: Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount in Brushed Nickel finish.

Segurtasun Informazioa

OHARRA: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Do not attempt installation if you are not familiar with electrical wiring. Consult a qualified electrician.

• Irakurri arretaz argibide guztiak instalatu aurretik.
• Ensure the electrical supply is disconnected before handling the fixture.
• All wiring connections must be in accordance with local and national electrical codes.
• Ez gainditu zehaztutako bolumenatage (120 Voltio).
• Aparailu hau barruko erabilerarako soilik diseinatuta dago.

Paketearen edukia

Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:

• LED Flush Mount Fixture (with integrated AC Module)
• Beirazko itzala
• Mounting Hardware Kit (screws, wire nuts, mounting strap)
• Argibide eskuliburua

Beharrezko tresnak (ez daude barne)

• Phillips buru bihurkina
• Buru lauko bihurkina
• Hari-ebakitzaileak
• Aliketak
• Zinta Elektrikoa
• Segurtasun Betaurrekoak

Konfigurazioa eta Instalazioa

Follow these steps to properly install your LED flush mount fixture:

1. Itzali energia: Bilatu zirkuitu-hauslea edo fusible-kutxa eta itzali argindarra instalatuko den konexio-kutxako korrontea. Egiaztatu korrontea itzalita dagoela bolumen-neurgailu bat erabiliz.tage probatzailea.
2. Muntaketa prestatu: Attach the mounting strap to the junction box using the provided screws. Ensure the strap is securely fastened.
3. Kableatu konexioak:
   • Konektatu beltza kablea aparatutik gailuaraino beltza kable (beroa) konexio-kutxatik kable-torloju bat erabiliz.
   • Konektatu zuria kablea aparatutik gailuaraino zuria (neutroa) kablea konexio-kutxatik kable-torloju bat erabiliz.
   • Konektatu lurra kablea aparatutik gailuaraino lurra wire from the junction box (or to the green ground screw on the mounting strap) using a wire nut.
   • Kontu handiz sartu hari guztiak lotura-kutxan.
4. Erantsi tresna: Align the fixture base with the mounting strap and secure it with the provided mounting screws. Ensure the fixture is flush against the ceiling.
5. Instalatu beirazko itzala: Carefully attach the glass shade to the fixture according to the specific design. Typically, this involves twisting or securing with decorative nuts.
6. Berrezarri boterea: Piztu berriro korrontea etengailu elektrikoan edo fusible-kutxan.

Image: Product dimensions for installation planning. The fixture measures approximately 9.25 inches in diameter and 4.63 inches in height.

Irudia: Adibamples of flush mount light fixture placement in various rooms, including hallways, living areas, bedrooms, and utility spaces.

Funtzionamendu-argibideak

Once installed, operate your LED flush mount fixture as follows:

• Piztu/Itzali: Use a standard wall switch connected to the fixture's electrical circuit to turn the light on or off.
• dimming: This fixture is dimmable when used with a compatible wall dimmer switch. Ensure your dimmer switch is rated for LED lighting to prevent flickering or damage.

Image: Visual representation indicating the fixture is dimmable when connected to a compatible wall dimmer.

Mantentzea

The Progress Lighting P3408-0930K9 features an integrated LED AC module, meaning there are no bulbs to replace. Maintenance is minimal:

• Garbiketa: To clean the fixture, ensure power is off. Wipe the metal parts with a soft, dry cloth. Clean the glass shade with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or solvents.
• Ikuskapena: Aldian-aldian, ikuskatu aparatua kalterik edo konexio solterik dagoen ikusteko. Arazoren bat aurkitzen baduzu, deskonektatu korrontea eta kontsultatu elektrizista kualifikatu bati.

Arazoak konpontzea

Zure gailuarekin arazoak badituzu, jo ezazu honako arazo eta irtenbide ohikoenei:

Zehaztapenak

Detailed specifications for the Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount:

• Modelo zenbakia: P3408-0930K9
• Marka: Aurrerapen Argiztapena
• Kolorea: Nikel brotxatua
• Materiala: Aleaziozko altzairua, beira
• Estiloa: Garaikidea
• Argi-tresnaren forma: Sabaitik gertu
• Produktuaren neurriak: 9.25"L x 9.25"Z x 4.63"A
• Barruko/Kanpoko erabilera: Barruan
• Energia iturria: Kable elektrikoa
• Instalazio mota: Flush mendia
• Argi iturri mota: Integrated LED (AC Module)
• Argi-iturri kopurua: 1
• liburukiatage: 120 Volt
• Argi kolorea: Zuri epela (3000K)
• Distira: 1211 lumen
• Wattage: 17 Watt
• Koloreen errendatze indizea (CRI): 90
• Erregulagarria: Yes, with compatible wall dimmer
• Beharrezkoa den muntaia: Bai
• Jatorrizko herrialdea: Txina
• UPC: 785247189168

Image: Key LED specifications including 90 CRI for accurate color rendering and 3000K for a warm white light output.

Bermearen informazioa

This Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount is covered by a 5 urteko bermea from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact Progress Lighting customer support.

Bezeroarentzako Arreta

If you have any questions regarding the installation, operation, or maintenance of your Progress Lighting fixture, please contact Progress Lighting customer support. You can find contact information on the official Progress Lighting webgunea edo zure dendariaren bidez.

Sareko baliabideak: Informazio eta laguntza gehiago lortzeko, bisitatu Progress Lighting denda Amazonen.