Leitz 5530 Manual Stapler User Guide

Sarrera

This manual provides comprehensive instructions for the safe and efficient use of your Leitz 5530 manual stapler. Please read this guide thoroughly before operating the device to ensure proper function and longevity.

Segurtasun-argibideak

• Lesioak ekiditeko, mantendu hatzak grapatzeko mekanismotik urrun funtzionatzen ari den bitartean.
• Use only staples of the correct size and type recommended for the Leitz 5530 stapler.
• Do not attempt to staple materials thicker than the stapler's maximum capacity.
• Keep the stapler out of reach of children.
• Saihestu grapagailua erortzea, barneko osagaiak kaltetu baititzake.

Paketearen edukia

• 1 x Leitz 5530 Manual Stapler (Black)

Produktua amaituview

Familiarize yourself with the components of your Leitz 5530 stapler.

1. irudia: Angeludun view of the Leitz 5530 manual stapler, showcasinbere diseinu trinkoa eta akabera beltza ditu.

2. irudia: Aldea view of the Leitz 5530 manual stapler, illustrating its ergonomic shape and staple exit point.

3. irudia: Goikoa view of the Leitz 5530 manual stapler, highlighting the "PUSH" button for staple loading and the "OPEN" latch for the staple channel.

Setup: Loading Staples

1. Locate the "PUSH" button on the top rear of the stapler (refer to Figure 3).
2. Press the "PUSH" button firmly to release the staple channel. The top cover will spring open.
3. Pull the staple channel completely out until it locks into place.
4. Insert a strip of Leitz 24/6 or 26/6 staples into the channel with the staple points facing downwards.
5. Push the staple channel back into the stapler until it clicks securely into place.
6. Close the top cover until it latches.

Zure grapagailua erabiltzeko prest dago.

Funtzionamendu-argibideak

1. Bildu grapatu nahi dituzun paperak, ondo lerrokatuta daudela ziurtatuz.
2. Insert the papers into the stapler's throat, positioning them where you want the staple to be placed.
3. Press down firmly and evenly on the top of the stapler until the staple penetrates the paper and clinches underneath.
4. Release the stapler. The stapled papers can now be removed.

Do not force the stapler if it encounters resistance, as this may cause jams or damage.

Mantentzea

Grapa-blokeoak garbitzea

1. If a staple jam occurs, first remove any paper from the stapler.
2. Open the staple channel as described in the "Loading Staples" section.
3. Carefully remove any bent or jammed staples from the channel using tweezers or a small, flat tool. Be cautious to avoid injury.
4. Ensure the staple channel is clear before reloading new staples and closing the stapler.

Garbiketa

Wipe the exterior of the stapler with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.

Arazoak konpontzea

Zehaztapenak

Bermea eta Laguntza

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Leitz webgunea. Gorde erosketaren egiaztagiria bermearen erreklamazioetarako.

For further assistance, please contact Leitz customer service.