Bose Acoustimass 6 Seriea V Etxeko Zinemako Bozgorailu Sistemaren Erabiltzaile Eskuliburua

Sarrera

Welcome to your Bose Acoustimass 6 Series V Home Theater Speaker System. This system is engineered to deliver an immersive 5.1 surround sound experience for your home entertainment. It features compact Virtually Invisible Series II speakers and a powerful Acoustimass module designed for deep, impactful bass.

The Bose Acoustimass 6 Series V system components, including the Acoustimass module and five Virtually Invisible Series II satellite speakers.

Paketearen edukia

• 1 x Acoustimass modulua
• 5 x Virtually Invisible Series II satellite speakers
• Speaker cables and connectors
• Acoustimass modulurako elikatze-kablea

Konfigurazioa

Bozgorailuak jartzea

Optimal placement of your speakers is crucial for the best surround sound experience.

• Front Speakers (Left, Center, Right): Place the front left and right speakers equidistant from your primary listening position and at ear level. The center speaker should be positioned directly above or below your television, aligned with the screen.
• Atzeko bozgorailuak: Position the rear speakers behind your listening area, slightly wider than the front speakers, and at or slightly above ear level.
• Acoustimass modulua: The Acoustimass module can be placed discreetly, even behind furniture, as its non-directional bass output does not require direct line of sight. Ensure it has adequate ventilation.

Example setup showing the Virtually Invisible Series II speakers mounted on a wall around a television, demonstrating a typical home theater configuration.

Sistema konektatzea

The system includes clearly marked cables and connectors for straightforward installation.

1. Connect Satellite Speakers to Acoustimass Module: Use the provided speaker cables to connect each Virtually Invisible Series II speaker to the corresponding output on the Acoustimass module. Ensure correct polarity (positive to positive, negative to negative).
2. Connect Acoustimass Module to A/V Receiver: Connect the Acoustimass module's input to the subwoofer/LFE output of your A/V receiver using an appropriate audio cable (not included).
3. Connect A/V Receiver to Speakers: Connect the speaker outputs from your A/V receiver to the corresponding inputs on the Acoustimass module. Follow the color-coded or labeled connections.
4. Potentzia-konexioa: Plug the power cord into the Acoustimass module and then into a wall outlet.

Note: This system requires an A/V receiver (not included) for operation. Ensure your receiver supports 5.1 channel audio.

Sistema ustiatzea

Piztu/Itzaltzea

The Acoustimass module powers on automatically when it receives an audio signal from your A/V receiver and enters standby mode when no signal is detected.

Soinua doitzea

The Acoustimass module features adjustable controls for volume and low-frequency effects. These controls allow you to fine-tune the bass output to your preference and room acoustics.

• Bolumen kontrola: Adjusts the overall loudness of the bass.
• Low-Frequency Effects (LFE) Control: Modifies the intensity of the deep bass effects.

Further sound adjustments, such as individual speaker levels and surround sound modes, are typically managed through your A/V receiver. Refer to your receiver's manual for detailed instructions.

Mantentzea

Garbiketa

Clean the speaker surfaces and Acoustimass module with a soft, dry cloth. Do not use liquid cleaners or solvents.

Aireztapena

Ensure the Acoustimass module has adequate ventilation to prevent overheating. Do not block any ventilation openings.

Kableen kudeaketa

Periodically check all cable connections to ensure they are secure. Loose connections can affect sound quality.

Arazoak konpontzea

Soinurik ez

• Verify all power connections to the Acoustimass module and A/V receiver.
• Check all audio cable connections between the speakers, Acoustimass module, and A/V receiver. Ensure correct polarity.
• Confirm the A/V receiver is set to the correct input source.
• Adjust the volume on both the Acoustimass module and your A/V receiver.

Distorted Sound or Poor Bass

• Check for loose speaker wire connections.
• Ensure the Acoustimass module is not placed in an enclosed space without proper ventilation.
• Adjust the volume and low-frequency effects controls on the Acoustimass module.
• Review your A/V receiver's speaker settings, ensuring the subwoofer output is enabled and configured correctly.

Difficulty Mounting Speakers

The Virtually Invisible Series II speakers are designed for flush wall mounting. If you encounter difficulties, ensure you are using compatible mounting brackets (sold separately) designed for Bose Virtually Invisible speakers. Standard speaker mounts may not be compatible due to unique connector designs.

Non-Standard Wiring

The system uses proprietary connectors. If you need to run wires through walls or over long distances, consider consulting a professional installer to ensure proper integration and avoid damaging the specialized cables.

Zehaztapenak

Bermearen informazioa

This Bose Acoustimass 6 Series V Home Theater Speaker System comes with a limited warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Bose webgunea.

Laguntza

For further assistance, technical support, or to purchase accessories, please visit the official Bose support webgunera edo jarri harremanetan Bose bezeroarentzako arreta-zerbitzuarekin.

Lineako laguntza: www.bose.com/support

For additional product information, you may also visit the Bose denda Amazonen.