Sarrera
This manual provides essential instructions for the setup, operation, and maintenance of your Datalogic Heron HD3130-BK 1D Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
Paketearen edukia
- Datalogic Heron HD3130-BK 1D Barcode Scanner
- Eskanerraren euskarria
- (USB) Connection Cable (sold separately or included depending on package)
- Dokumentazioa (eskuliburu hau)
Note: The connection cable is required for operation and may be sold separately.
Konfigurazioa
Follow these steps to set up your Datalogic Heron HD3130-BK barcode scanner:
- Eskanerra deskonprimitu: Carefully remove the scanner and its stand from the packaging.
- Muntatu standa: If the stand is not pre-assembled, attach the scanner to the stand base according to the visual guide below. Ensure it is securely fastened.
- Konektatu kablea: Insert one end of the USB connection cable into the port at the base of the scanner. Connect the other end of the USB cable to an available USB port on your computer (desktop or laptop).
- Piztu: The scanner is powered via the USB connection. Once connected, it should power on automatically.
- Gidariaren instalazioa (beharrezkoa bada): In most cases, the scanner will be recognized as a standard HID keyboard device and will not require specific driver installation. If prompted, follow your operating system's instructions for new hardware detection.
This image displays the Datalogic Heron HD3130-BK 1D Barcode Scanner in black, positioned on its included stand. The scanner features a sleek, ergonomic design, suitable for both handheld and presentation scanning.
Funtzionamendu-argibideak
The Datalogic Heron HD3130-BK is designed for efficient 1D barcode scanning. It supports both handheld and presentation modes.
Eskuko eskaneatzea
- Pick Up the Scanner: Remove the scanner from its stand.
- Aim and Scan: Point the scanner's window at the 1D barcode you wish to read. Ensure the red aiming line covers the entire barcode.
- Berretsi eskaneatzea: A successful scan is typically indicated by an audible beep and/or a visual confirmation (e.g., a green light). The scanned data will be transmitted to your connected computer as keyboard input.
Presentation Scanning (using the stand)
- Jarri elementua: Position the barcode of the item in front of the scanner's window while it is in its stand.
- Detekzio automatikoa: The scanner will automatically detect and read the barcode when it is presented correctly within its field of view.
- Berretsi eskaneatzea: A successful scan is indicated by an audible beep and/or visual confirmation.
The scanner is capable of processing approximately 270 scans per second, ensuring quick and efficient data capture.
Mantentzea
Mantentze egokiak eskanerraren iraupena eta errendimendu optimoa bermatzen ditu.
- Garbiketa: Erabili lipurrik gabeko zapi leun bat dampened with water or a mild, non-abrasive cleaner to wipe the scanner's exterior and scan window. Do not use harsh chemicals or abrasive materials.
- Biltegiratzea: When not in use, store the scanner in a clean, dry environment, away from direct sunlight and extreme temperatures.
- Kableen zainketa: Avoid bending or twisting the USB cable excessively. Ensure it is not pinched or placed under heavy objects.
Arazoak konpontzea
If you encounter issues with your Datalogic Heron HD3130-BK scanner, refer to the following common problems and solutions:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Eskanerra ez da pizten. | USB kablea ez dago konektatuta edo akastuna dago. | Ensure the USB cable is securely connected to both the scanner and the computer. Try a different USB port or cable. |
| Eskanerrak ez ditu barra-kodeak irakurtzen. | Barcode damaged, incorrect aiming, or scanner settings. | Ensure the barcode is clean and undamaged. Aim the red line directly across the barcode. Check if the scanner is configured for the specific barcode symbology (e.g., UPC-A, Code 39). |
| Eskaneatutako datuak gaizki agertzen dira. | Keyboard layout mismatch or scanner configuration. | Verify your computer's keyboard layout matches the scanner's configured output. Refer to the full product manual for advanced configuration options. |
| Eskanerrak bip egiten du baina ez da daturik transmititzen. | Application not in focus or incorrect interface mode. | Ensure the cursor is in the desired input field of your application. Confirm the scanner is operating in HID keyboard emulation mode. |
For more detailed troubleshooting or advanced configuration, please refer to the comprehensive Datalogic Heron HD3130 product manual available on the official Datalogic webgunea.
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Modelo zenbakia | HD3130-BK |
| Eskaner mota | 1D barra kodeen eskanerra |
| Eskaneatu tasa | 270 eskaneatu/segundo |
| Konektibitate Teknologia | USB kablea |
| Energia iturria | Kable bidezko elektrikoa (USB bidez) |
| Gailu bateragarriak | Mahaigaina, ordenagailu eramangarria |
| Elementuaren pisua | 1.28 libra (gutxi gorabehera 0.58 kg) |
| Produktuaren neurriak | 7.5 x 8.8 x 4.1 hazbete (gutxi gorabehera 19.05 x 22.35 x 10.41 cm) |
| Fabrikatzailea | Datalogikoa |
| Merkataritza-identifikazio-zenbaki globala (GTIN) | 05054629213858 |
Bermea eta Laguntza
Datalogic products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty statement included with your purchase or visit the official Datalogic webgunea.
For technical support, service, or to inquire about additional accessories, please contact Datalogic customer support through their official channels. You may need your product model number (HD3130-BK) and serial number (if applicable) when contacting support.
Sareko baliabideak: For the most up-to-date documentation, drivers, and software, please visit the Datalogic Official Webgunea.
