Sarrera
This manual provides detailed instructions for the safe and efficient operation of your Pyle PDA35BT Mini Bluetooth Power Digital Class D Amplifier. This compact 2-channel stereo amplifier features Bluetooth connectivity, two auxiliary inputs, and a headphone output, making it suitable for various audio setups. Please read this manual thoroughly before use and retain it for future reference.
Segurtasun-argibideak
- Ziurtatu elikadura hornidura boltage-k unitatean zehaztutako eskakizunak betetzen ditu.
- Ez jarri unitatea euripean, hezetasunean edo muturreko tenperaturetan.
- Saihestu unitatea bero-iturrien ondoan edo eguzki-argiaren eraginpean jartzea.
- Ez ireki ampc bizitzaileaasing. Konponketa guztiak langile kualifikatuen esku utzi.
- Mantendu unitatea haurrengandik urrun.
- Disconnect the power adapter from the wall outlet if the unit will not be used for an extended period.
- Ziurtatu aireztapen egokia unitatearen inguruan, gehiegi berotzea saihesteko.
Paketearen edukia
Egiaztatu elementu guztiak bertan daudela paketea desegiten duzunean:
- Pyle PDA35BT Mini Bluetooth potentzia Ampbiziagoa
- Wall Power Adapter (24V DC, 4.5A)
- Bluetooth antena
- RCA (L/R) Audio Cable
- Banana Plugs (for speaker connection)
- 3.5mm (AUX) Input Cable
Figure 1: Pyle PDA35BT Amplifier and Accessories
This image displays the compact Pyle PDA35BT amplifier alongside its essential accessories, including the power adapter, detachable Bluetooth antenna, RCA audio cables, banana plugs for speaker wire termination, and a 3.5mm AUX input cable, illustrating a complete package for immediate setup.
Produktua amaituview
Aurrealdeko panela
Figure 2: Front and Rear Panel Diagram
This diagram provides a clear, numbered illustration of both the front and rear panels of the Pyle PDA35BT amplifier, highlighting all input, output, and control features for easy identification and setup.
- Potentzia adierazlea: Unitatea pizten denean pizten da.
- BT adierazlea: Illuminates when Bluetooth is active and flashes during pairing.
- Sarrera hautatzailea: Toggle switch to select between Bluetooth (BT) and Line (AUX) input.
- Headphone Jack (1/4''): Connect headphones for private listening. Automatically mutes speaker output.
- Volume/ON/OFF Knob: Rotary control for adjusting master volume and powering the unit on/off.
- AUX-IN (3.5mm): Konektatu kanpoko audio gailuak 3.5 mm-ko kable baten bidez.
Atzeko panela
- BT ANT (Bluetooth Antenna): Konektatu barneko Bluetooth antena haririk gabeko irismen optimoa lortzeko.
- R OUT / L OUT (Speaker Outputs): Connect passive speakers using banana plugs. Supports 2-channel stereo output (50W x 2 @ 8 Ohm).
- LINE INPUT (RCA L/R): Connect external audio sources using RCA cables.
- DC 24V (Power Input): Connect the included 24V DC power adapter.
Figure 3: Pyle PDA35BT Front and Rear Views
This image provides a clear visual of the Pyle PDA35BT amplifier from both the front and rear, detailing the layout of all control knobs, input jacks, output terminals, and the Bluetooth antenna connection point.
Konfigurazioa
- Konektatu bozgorailuak:
Konektatu zure bozgorailu pasiboak R OUT eta L KANPO terminals on the rear panel using banana plugs. Ensure correct polarity (red to red, black to black) for optimal sound quality. This amplifier is designed for bookshelf or small outdoor speakers, not large 10-12 inch speakers or subwoofers.
- Attach Bluetooth Antenna:
Screw the included Bluetooth antenna onto the BT ANT konektorea atzeko panelean.
- Connect Audio Source (Optional - Wired):
- For RCA input: Connect your audio device (e.g., CD player, TV) to the LINE INPUT (RCA L/R) on the rear panel using RCA cables.
- For 3.5mm AUX input: Connect your audio device (e.g., smartphone, tablet) to the AUX-IN (3.5 mm) jack on the front panel using a 3.5mm audio cable.
- Konektatu energia:
Connect the included 24V DC wall power adapter to the DC 24V input on the rear panel, then plug the adapter into a suitable wall outlet.
Funtzionamendu-argibideak
- Piztu/Itzali:
Biratu Volume/ON/OFF Knob clockwise to turn the unit on. The Potentzia adierazlea (1) will illuminate. Rotate counter-clockwise until it clicks to turn off.
- Bluetooth bidezko lotura
- Ziurtatu Sarrera hautatzailea (3) is set to BT. The BT adierazlea (2) will flash, indicating it's in pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for "Pyle Audio" or "PDA35BT".
- Hautatu amplifier from the list to pair. Once connected, the BT adierazlea (2) will glow solid blue.
- The Bluetooth version is 4.0, offering a range of approximately 30 feet. If no device connects within a certain time, the amplifier may time out. Turn the unit off and on again to re-enter pairing mode.
- Using AUX Input:
- For 3.5mm AUX-IN (front panel): Connect your device and set the Sarrera hautatzailea (3) to LERROA.
- For RCA LINE INPUT (rear panel): Connect your device and set the Sarrera hautatzailea (3) to LERROA.
- Aurikularretarako irteera:
Konektatu entzungailuak Headphone Jack (1/4'') (4) on the front panel. The speaker outputs will automatically mute when headphones are connected.
- Bolumena doitzea:
Erabili Volume/ON/OFF Knob (5) to adjust the overall output volume.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Botererik ez | Power adapter not connected or faulty; unit not turned on. | Ensure power adapter is securely connected and plugged into a working outlet. Rotate the Volume/ON/OFF knob clockwise to turn on. |
| Bozgorailuen soinurik ez | Speakers not connected correctly; input selector incorrect; volume too low; headphones connected. | Check speaker wire connections and polarity. Verify Input Selector is set to the correct source. Increase volume. Disconnect headphones if speakers are desired. |
| Bluetootha ez da parekatzen | Unit not in pairing mode; device too far; interference. | Ensure Input Selector is set to BT and BT Indicator is flashing. Move device closer to the amplifier (within 30ft). Turn amplifier off and on again to reset Bluetooth. |
| Soinu distortsionatua | Volume too high; faulty cables; speaker impedance mismatch. | Reduce volume. Check and replace audio cables if necessary. Ensure speakers are compatible (8 Ohm recommended). |
Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Irteera Potentzia | 100 Watts (RMS: 50 Watt x 2 @ 8 Ohm) |
| Kanal kopurua | 2 |
| Bluetooth bertsioa | 4.0 |
| Bluetooth barrutia | Gutxi gorabehera. 30 oin |
| Sarrerak | 3.5mm AUX-IN (Front), RCA (L/R) Line Input (Rear) |
| Irteerak | Banana Plugs (Speaker), 1/4'' Headphone Jack |
| Gehienezko hornidura boltage | 24 voltio (DC) |
| Elementuaren neurriak (L x W x H) | 4.9'' x 3.6'' x 1.9'' |
| Elementuaren pisua | 1.06 kilo |
Mantentzea
- Garbitu unitatea zapi leun eta lehor batekin. Ez erabili garbitzaile likidorik edo aerosolik.
- Keep the unit free from dust and debris to ensure proper ventilation.
- Gorde ampLifter-a leku fresko eta lehor batean gorde erabiltzen ez denean.
Bermea eta Laguntza
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Pyle webgunea. Gorde erosketaren egiaztagiria berme-erreklamazioetarako.
