Sarrera
The Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock is designed to provide accurate time, indoor temperature, and convenient alarm functions. Its radio-controlled feature automatically synchronizes the time, ensuring precision. The unique projection feature allows you to view the time on your ceiling or wall, enhancing usability in low-light conditions.
Ezaugarri nagusiak:
- Dual Alarm (Weekday/Daily alarm options)
- Barruko Tenperaturaren bistaratzea
- Time Projection onto ceiling or wall
- LED Backlight for LCD display
- Atomic Clock Synchronization for precise timekeeping
- Errepikatzeko funtzioa
Paketearen edukia
Mesedez, egiaztatu elementu hauek zure paketean sartuta daudela:
- Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock unit
- AC Potentzia Egokitzailea
- AAA bateriak (2x)
- Argibide eskuliburua (dokumentu hau)
Produktua amaituview
Familiarize yourself with the main components and controls of your alarm clock.
Irudia: Aurrealdea view of the Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock. The image displays the clock's main body, featuring a digital LCD screen that shows time and temperature. A projection lens is visible on the top left side, designed to project the time. The clock has a clean, white finish.
Aurrealdeko panela:
- LCD pantaila: Shows current time, indoor temperature, and alarm status.
- Proiekzio lentea: Projects time onto a surface.
- ATZERATU/ARGI botoia: Activates snooze during alarm, illuminates backlight, or temporarily activates projection.
Rear/Side Panel:
- MODE botoia: Toggles display modes and enters setting menus.
- GORA/BEHERA botoiak: Adjust values during settings, manually activate atomic time search.
- ALARM 1/2 Buttons: Select and set Alarm 1 or Alarm 2.
- PROJECTION ON/OFF Switch: Controls continuous projection.
- PROJECTION ROTATION Button: Rotates projected image 180 degrees.
- Berrezarri botoia: Resets the unit to factory defaults.
- Bateriaren konpartimendua: Erreserbako bateriak gordetzen ditu.
- DC IN Jack: AC korronte-egokigailura konektatzen da.
Konfigurazioa
1. Bateriaren instalazioa
- Ireki unitatearen atzealdean dagoen bateriaren konpartimentuaren estalkia.
- Insert two (2) AAA batteries, observing the correct polarity (+ and -).
- Close the battery compartment cover. These batteries provide backup power during outages.
2. Connect AC Power Adapter
- Plug the AC power adapter into the DC IN jack on the back of the clock.
- Plug the adapter into a standard wall outlet. The clock will power on, and the LCD display will activate. Continuous projection requires AC power.
3. Atomic Clock Synchronization
Upon initial power-up, the clock will automatically attempt to synchronize with the atomic clock signal. This process may take several minutes to several hours, depending on your location and signal strength. Place the clock near a window for best reception.
- A signal icon will appear on the LCD when synchronization is successful.
- To manually initiate a signal search, press and hold the UP botoia 3 segundoz.
4. Setting Time Zone
After successful atomic synchronization, you may need to set your local time zone.
- Eduki sakatuta MODUA botoia 3 segundoz ordua ezartzeko moduan sartzeko.
- Sakatu MODUA button repeatedly until the Time Zone setting flashes.
- Erabili UP or BEHERA buttons to select your desired time zone (e.g., EST, CST, MST, PST).
- Sakatu MODUA to confirm and exit, or wait 30 seconds for automatic exit.
Funtzionamendu-argibideak
Manual Time and Date Setting (If Atomic Sync Fails)
- Eduki sakatuta MODUA button for 3 seconds. The hour digit will flash.
- Erabili UP or BEHERA ordua doitzeko botoiak.
- Sakatu MODUA to confirm and move to the next setting (minutes, year, month, day, 12/24 hour format, Daylight Saving Time (DST) ON/OFF).
- Repeat steps 2 and 3 until all settings are adjusted.
- Sakatu MODUA to exit, or wait 30 seconds for automatic exit.
Alarmak ezartzea (1. alarma eta 2. alarma)
The clock features two independent alarms (Alarm 1 and Alarm 2).
- Sakatu 1. ALARMA or 2. ALARMA botoia behin sakatu uneko alarmaren ordua bistaratzeko.
- Press and hold the respective ALARMA button for 3 seconds. The alarm hour will flash.
- Erabili UP or BEHERA alarma-ordua doitzeko botoiak.
- Sakatu ALARMA button to confirm and move to alarm minutes.
- Adjust alarm minutes using UP or BEHERA.
- Sakatu ALARMA button to confirm and move to alarm type (Daily or Weekday).
- Adjust alarm type using UP or BEHERA.
- Sakatu ALARMA button to confirm and exit, or wait 30 seconds for automatic exit.
Alarma aktibatzeko edo desaktibatzeko, sakatu tekla 1. ALARMA or 2. ALARMA button once. An alarm icon will appear on the LCD when active.
Errepikatzeko funtzioa
Alarma jotzen duenean, sakatu SNOOZE / ARGIA button to temporarily silence the alarm for approximately 8 minutes. The alarm will sound again after the snooze period. To stop the alarm completely, press any other button.
Denboraren proiekzioa
- Continuous Projection: Irristatu PROIEKZIOA ON / OFF aldatu ON. The time will be continuously projected. This feature requires the AC power adapter to be connected.
- Temporary Projection: If continuous projection is off, press the SNOOZE / ARGIA button to activate projection for approximately 15 seconds.
- Projection Orientation: Sakatu PROIEKZIOAREN BIRAKETA button to flip the image 180 degrees, ensuring it is displayed right-side up on your chosen surface.
- Proiekzio angelua doitzea: The projection lens can be manually tilted to adjust the projection angle on your ceiling or wall.
LED argia
Sakatu SNOOZE / ARGIA button to illuminate the LCD display backlight for approximately 15 seconds.
Mantentzea
Unitatea garbitzea
Wipe the clock with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the unit. Ensure the unit is unplugged from the AC power before cleaning.
Bateria ordezkatzea
When the backup batteries are low, the display may dim or settings may be lost during power outages. Replace the two (2) AAA batteries in the battery compartment, observing correct polarity.
Arazoak konpontzea
| Arazoa | Irtenbidea |
|---|---|
| Erlojuaren pantaila hutsik edo ilun dago. | Ensure the AC power adapter is securely connected to both the clock and a working wall outlet. Check if backup batteries are installed correctly and are not depleted. |
| Atomic time synchronization fails or is inaccurate. | Place the clock near a window, away from electronic devices that may cause interference. Manually initiate a signal search by holding the UP button. If synchronization consistently fails, manually set the time and date. |
| Time projection is not visible or is dim. | Ensure the AC power adapter is connected for continuous projection. Check the PROIEKZIOA ON / OFF switch. Adjust the projection lens angle. Ensure the room is sufficiently dark for optimal visibility. |
| Projected time is upside down or backwards. | Sakatu PROIEKZIOAREN BIRAKETA button to flip the image 180 degrees. Adjust the physical orientation of the clock if needed. |
| Alarmak ez du jotzen. | Ensure the alarm is activated (alarm icon visible on LCD). Verify the alarm time is set correctly. Check if the volume is not set to minimum (if applicable, though this model doesn't specify volume control). |
| Snooze/Light button only activates backlight for 15 seconds, not 5 minutes. | The backlight duration is fixed at approximately 15 seconds for temporary illumination. The 5-minute duration mentioned in some older documentation may not apply to this specific model. |
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Eredua | RM338PA |
| Neurriak (LxWxH) | 4.25" x 1.02" x 3.03" (10.8 cm x 2.6 cm x 7.7 cm) |
| Pisua | 0.24 lb (109 g) |
| Barruko Tenperatura Tartea | -5 °C eta 50 °C (23 °F eta 122 °F) |
| Tenperaturaren zehaztasuna | 0°C to 40°C: ±1°C (±2°F); 40°C to 0°C: ±2°C (±4°F) |
| Tenperatura Ebazpena | 0.1 °C (0.2 °F) |
| Elikatze Hornidura | AC Power Adapter (included), 2 x UM-4 (AAA) 1.5V batteries (for backup) |
| Bistaratzeko mota | LED atzeko argiztapenarekin LCD digitala |
| Ezaugarri bereziak | Atomic Time, Time Projection, Dual Alarm, Snooze, Indoor Temperature |
Bermearen informazioa
Oregon Scientific products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Oregon Scientific webgunea. Gorde erosketa-agiria erosketaren frogagiri gisa.
Bezeroarentzako Arreta
If you encounter any issues or have questions regarding your Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock, please visit the official Oregon Scientific support website or contact their customer service department for assistance. Contact information can typically be found on the manufacturer's webgunean edo produktuaren ontzian.