Soundbot SB210 HD Stereo Bluetooth Beanie User Manual

Sarrera

Eskerrik asko erosketagatik.asing the Soundbot SB210 HD Stereo Bluetooth Beanie. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read it thoroughly before use to ensure optimal performance and longevity of the product.

Segurtasun Informazioa

• Ez jarri gailua muturreko tenperatura edo hezetasunetara.
• Keep the device away from water and liquids, except when the electronic components are removed for washing.
• Ez saiatu gailua desmuntatzen edo aldatzen. Horrek bermea baliogabetuko du.
• Erabili emandako kargatzeko kablea edo baliokide ziurtatu bat soilik.
• Saihestu bolumen handietan entzutea denbora luzez, entzumenaren kalteak saihesteko.

Paketearen edukia

• Soundbot SB210 HD Stereo Bluetooth Beanie
• Mikro USB kargatzeko kablea
• Erabiltzailearen eskuliburua

Produktua amaituview

The Soundbot SB210 integrates Bluetooth audio technology into a comfortable beanie, allowing for wireless music playback and hands-free calling.

Image: The Soundbot SB210 Beanie featuring its integrated control panel on the side.

Kontrol panelaren funtzioak

• Erreproduzitu/Pausatu botoia: Piztu/itzali, musika erreproduzitu/pausatu, deiak erantzun/amaitu.
• Bolumena igotzeko (+) botoia: Increase volume (short press), next track (long press).
• Bolumena jaisteko (-) botoia: Decrease volume (short press), previous track (long press).
• Mikrofonoa: Esku libreko deiak egiteko.
• Mikro USB ataka: Barneko bateria kargatzeko.

Konfigurazioa

1. Charging the Beanie

Before initial use, fully charge the beanie. Locate the Micro USB charging port on the control panel. Connect the provided Micro USB cable to the port and the other end to a USB power source (e.g., wall adapter, computer USB port). The LED indicator will show charging status. A full charge typically takes approximately one hour and provides a full day of playback.

Image: The Micro USB charging port integrated into the beanie's control panel.

2. Bluetooth Gailu batekin parekatzea

1. Ensure the beanie is charged and turned off.
2. Press and hold the Play/Pause button on the control panel until the LED indicator flashes red and blue alternately. This indicates the beanie is in pairing mode.
3. Bluetooth gaitutako gailuan (smartphone-a, tableta, etab.), joan Bluetooth ezarpenetara eta gaitu Bluetooth.
4. Bilatu available devices. You should see "SB210" or "Soundbot Beanie" in the list.
5. Select "SB210" to connect. Once successfully paired, the LED indicator will typically show a solid blue light or flash blue slowly.

3. Wearing the Beanie

Place the beanie on your head, ensuring the integrated speakers are positioned comfortably over your ears. The beanie is designed to stay securely in place during various activities.

Funtzionamendu-argibideak

1. Piztu/Itzali

• Piztu: Press and hold the Play/Pause button for approximately 3 seconds until the LED indicator lights up.
• Itzali: Press and hold the Play/Pause button for approximately 3 seconds until the LED indicator turns off.

2. Musika erreproduzitzea

• Erreproduzitu/Pausatu: Sakatu labur Erreproduzitu/Pausatu botoia.
• Hurrengo ibilbidea: Sakatu luze bolumena igotzeko (+) botoia.
• Aurreko pista: Sakatu luze Bolumena Jaisteko (-) botoia.

3. Bolumenaren kontrola

• Handitu bolumena: Sakatu labur bolumena igotzeko (+) botoia.
• Murriztu bolumena: Sakatu labur Bolumena Jaisteko (-) botoia.

4. Esku libreko deiak

The integrated microphone allows for hands-free communication when paired with your smartphone.

• Deia erantzun/amaitu: Sakatu labur Erreproduzitu/Pausatu botoia.
• Deia baztertu: Luze sakatu Erreproduzitu/Pausatu botoia.
• Berriz markatu azken zenbakia: Sakatu birritan Erreproduzitu/Pausatu botoia.

Mantentzea

1. Garbiketa argibideak

The beanie is washable, but the electronic components must be removed first.

1. Locate the zipper on the inside lining of the beanie.
2. Unzip the lining and gently pull out the internal speakers and control module, which are typically held in place by Velcro. Be careful not to pull too hard on the connecting wires.
3. Once the electronic components are removed, the beanie can be machine washed according to the fabric care instructions (100% Acrylic, Machine Wash).
4. Allow the beanie to dry completely before reinserting the electronic components.
5. Carefully reinsert the speakers and control module, ensuring they are properly positioned over the ears, and secure them with the Velcro. Zip up the lining.

Image: The internal speaker component that needs to be removed before washing.

2. Biltegiratzea

Store the beanie in a cool, dry place away from direct sunlight and extreme temperatures when not in use.

Arazoak konpontzea

• Gailua ez da pizten: Ensure the beanie is fully charged. Connect it to a power source using the Micro USB cable.
• Ezin da Bluetooth gailuarekin parekatu:
  • Ensure the beanie is in pairing mode (LED flashing red and blue).
  • Make sure Bluetooth is enabled on your device and it is within range (up to 33 feet).
  • Try turning off and on both the beanie and your Bluetooth device.
  • Clear previous Bluetooth connections on your device and attempt to pair again.
• Soinurik ez edo bolumen baxua:
  • Check the volume levels on both the beanie and your connected device.
  • Ensure the beanie is properly paired and connected.
  • Verify that the speakers are correctly positioned over your ears.
• Blue LED flashes during use: This is normal behavior indicating the Bluetooth connection is active.

Zehaztapenak

Bermea eta Laguntza

Soundbot products are designed and manufactured to the highest quality standards. For specific warranty details and support, please refer to the warranty card included with your purchase or visit the official Soundbot webgunea.

Ofiziala Webgunea: www.SoundBot.com