ErregistroaTag UTRIX-16 PDF Tenperatura Datuen Erregistratzailearen Erabiltzaile Eskuliburua

1. Sarrera

EgunkariaTag UTRIX-16 is a high-performance, multi-use temperature data logger designed for reliable and accurate monitoring across a wide range of applications. This device records temperature data and generates comprehensive PDF reports without requiring special software or hardware. Its integrated USB connector allows for easy data transfer and configuration.

2. Segurtasun informazioa

• Do not expose the device to extreme physical shock or vibration.
• Avoid immersing the device in liquids.
• Ez saiatu gailua irekitzen edo aldatzen, bermea baliogabetuko baitu eta kalteak eragin ditzakeelako.
• Bota bateriak tokiko araudiaren arabera.
• Ensure the USB connector is clean and dry before connecting to a computer.

3. Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• ErregistroaTag UTRIX-16 PDF Temperature Data Logger
• Erabiltzailearen eskuliburua (dokumentu hau)

4. Gailua amaitu daview

The UTRIX-16 features a compact design with clear indicators and control buttons.

1. irudia: Aurrealdea view of the LogTag UTRIX-16 PDF Temperature Data Logger. This image displays the device's front panel, showing the "ALERT" and "OK" indicator lights, and the "STOP" and "START/Mark" buttons. The LogTag brand and "USB PDF TEMPERATURE RECORDER" text are visible, along with a serial number barcode.

• ALERT Indicator: Flashes when a pre-configured temperature alert threshold has been exceeded.
• OK Indicator: Flashes to confirm normal operation and within-range temperature readings.
• STOP botoia: Press to stop the current logging session.
• START/Mark Button: Press to start a new logging session or to insert a mark into the data stream during logging.
• Integrated USB Connector: Located at the bottom, used for connecting to a computer for configuration and data download.

2. irudia: EgunkariaTag UTRIX-16 with its integrated USB connector extended. This view highlights the USB-A plug, ready for connection to a computer's USB port, facilitating direct data transfer and device configuration.

5. Konfigurazioa

5.1 Hasierako konfigurazioa

The UTRIX-16 is typically pre-configured for immediate use. However, for custom settings (e.g., logging interval, alert thresholds, start delay), you will need to use the LogTag Analyzer software. This software is available for download from the official LogTag webgunea.

1. Download and install the LogTag Analizatzailearen softwarea ErregistroaTag Recorders Software.
2. Connect the UTRIX-16 to a USB port on your computer.


3. irudia: EgunkariaTag UTRIX-16 data logger connected to a computer's USB port. This illustrates the direct connection method for data download and configuration, eliminating the need for a separate interface cradle.

3. EgunkariaTag Analyzer software should automatically detect the connected device.
4. Follow the on-screen prompts within the software to configure logging parameters as needed.

5.2 Bateriaren informazioa

The UTRIX-16 uses a CR2 battery (included). The battery is designed for long life and is generally not user-replaceable without specialized tools. If battery replacement is required, it is recommended to contact LogTag support or an authorized service center.

6. Funtzionamendua

6.1 Starting a Logging Session

To start a new logging session:

1. Ensure the device is not currently logging (check the OK/ALERT indicators).
2. Eduki sakatuta HASI/Markatu button for approximately 5 seconds until the OK indicator flashes rapidly.
3. Release the button. The OK indicator will flash at regular intervals, indicating that logging has started.

6.2 Stopping a Logging Session

To stop an active logging session:

1. Eduki sakatuta GELDITU button for approximately 5 seconds until the ALERT indicator flashes rapidly.
2. Release the button. The device will cease logging.

6.3 Marking Data

During an active logging session, you can insert a mark into the data stream:

• Sakatu labur HASI/Markatu button (less than 2 seconds).
• A mark will be recorded in the data, visible when the data is downloaded and analyzed.

7. Data Retrieval and Reporting

The UTRIX-16 generates a PDF report directly when connected to a computer.

1. Connect the UTRIX-16 to a USB port on your computer.
2. Gailua unitate aldagarri gisa agertuko da.
3. Locate and open the generated PDF report file. This report contains a summary of the logging session, temperature graphs, and statistical data.
4. For advanced analysis and configuration, use the LogTag Analizatzailearen softwarea.

8. Mantentzea

8.1 Garbiketa

Garbitu gailua zapi leun batekin,amp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.

8.2 Bateria ordezkatzea

The battery in the UTRIX-16 is designed for extended use and is not intended for user replacement. If the battery life is depleted, contact LogTag support for service options.

9. Arazoak

10. Zehaztapenak

11. Bermea eta Laguntza

ErregistroaTag products are manufactured to high standards. For warranty information and technical support, please refer to the official LogTag webwebgunera edo jarri harremanetan zure tokiko banatzailearekin. Gorde erosketa-agiria erosketaren frogagiri gisa.

Official LogTag Webgunea: www.logtag-recorders.com