Sarrera
This manual provides detailed instructions for the installation, operation, and maintenance of your myTouchSmart 25055 In-Wall Digital Countdown Timer. This device is designed to automate indoor and outdoor lighting, fans, or other devices, offering convenience and energy savings. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
Segurtasun informazio garrantzitsua
- OHARRA: Risk of Electric Shock. Installation requires working with 120V AC wiring. Always turn off power at the circuit breaker or fuse box before installation.
- Gailu hau barrualdean erabiltzeko bakarrik dago pentsatuta.
- Kable neutroa da BEHARREZKOA for proper installation and operation. If you are unsure, consult a qualified electrician.
- Do not exceed the electrical ratings: 120VAC 60 Hz, 15A General/Resistive, 1200W Tungsten, 1200VA Ballast, ½ HP.
- Ziurtatu kable-konexio guztiak ondo isolatuta eta ondo finkatuta daudela.
- Irakurri argibide guztiak erabat instalazioa hasi aurretik.
Paketearen edukia
- myTouchSmart 25055 In-Wall Digital Countdown Timer
- Interchangeable White and Light Almond Switch Covers
- Erabiltzailearen eskuliburua (dokumentu hau)
Note: A wall plate is not included and must be purchased separately.
Instalazio-argibideak
- Itzali energia: Locate the circuit breaker or fuse that supplies power to the switch you are replacing. Turn it OFF. Verify power is off by attempting to turn on the light or device controlled by the switch.
- Kendu lehendik dagoen etengailua: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch.
- Identifikatu kableak: Identify the LINE (hot), LOAD, NEUTRAL, and GROUND wires. A neutral wire is BEHARREZKOA for this timer. If you do not have a neutral wire, consult a qualified electrician.
- Wire the Timer: Connect the wires to the myTouchSmart 25055 timer using the screw terminals as shown in the diagram below. Ensure all connections are tight and secure.
- LINE Wire: Connect to the terminal labeled "Line".
- KARGA-kablea: Connect to the terminal labeled "Load".
- KABLE NEUTROA: Connect to the terminal labeled "Neutral".
- LURRAREN KABLEA: Connect to the terminal labeled "Ground".
- Muntatu tenporizadorea: Gently push the wired timer into the wall box. Secure it with the provided screws.
- Instalatu horma-plaka: Attach your existing or a new wall plate (not included) over the timer.
- Berrezarri boterea: Piztu berriro korrontea etengailu elektrikoan edo fusible-kutxan.
Figure 1: Wiring Diagram. This image illustrates the correct connection points for the Line, Load, Neutral, and Ground wires on the back of the myTouchSmart 25055 timer module.
The timer includes interchangeable white and light almond switch covers to match your decor. To change the switch cover, carefully pry off the existing cover and snap on the desired color.
Funtzionamendua
Uneko ordua ezartzea
- Sakatu ERLOIA botoia ordua ezartzeko moduan sartzeko.
- Erabili UP (▲) eta BEHERA (▼) arrow buttons to adjust the hour and minute. The time will scroll.
- Sakatu ERLOIA botoia berriro sakatu berresteko eta ordua ezartzeko modutik irteteko.
Aurrez ezarritako programak erabiltzea
The myTouchSmart 25055 timer features three preset buttons for common scheduling needs:
- EVENING (5pm-12am): Activates the connected device from 5:00 PM to 12:00 AM.
- MORNING (5am-8am): Activates the connected device from 5:00 AM to 8:00 AM.
- ALL NIGHT (6pm-6am): Activates the connected device from 6:00 PM to 6:00 AM.
To activate a preset program, simply press the corresponding button (e.g., ARRATSALDEA, GOIZ, ALL NIGHT). The blue LED indicator next to the button will illuminate to show it is active.
Custom Countdown Function
The ATZERAKO KONTUA button allows you to set a custom countdown timer for up to 24 hours.
- Sakatu ATZERAKO KONTUA button. The display will show "00:00".
- Erabili UP (▲) eta BEHERA (▼) arrow buttons to set the desired countdown duration (up to 24 hours).
- Sakatu ATZERAKO KONTUA button again to start the countdown. The connected device will turn ON for the set duration and then turn OFF.
Manual ON/OFF Override
You can manually turn the connected device ON or OFF at any time, overriding any active program.
- Sakatu ON button to manually turn the device ON.
- Sakatu OFF button to manually turn the device OFF.
Figure 2: Simple Setup and Operation. This image highlights the scroll buttons for setting the current time and the preset buttons for activating schedules.
Ezaugarriak
- Bistaratze digitala: Clear digital display for time and countdown settings.
- Aurrez ezarritako programak: Three convenient preset programs (Evening, Morning, All Night) and a Custom Countdown.
- Eskuz gainditzea: Dedicated ON/OFF buttons for instant manual control.
- LED adierazleak: Blue LED lights indicate active programs.
- Bateragarritasun zabala: Works with LED, CFL, Incandescent, and Halogen bulbs, including dimmable LED and CFL.
- Ordezko Bateria: Maintains settings during power outages.
- Instalazio erraza: Screw terminal installation for efficient wiring.
- Aukera estetikoak: Includes interchangeable white and light almond switch covers.
Figure 3: Product Applications. This image demonstrates that the timer can control various devices such as indoor/outdoor lights, ceiling fans, and exhaust fans.
Mantentzea
- Clean the timer's surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals.
- The internal backup battery is designed for long-term use and typically does not require replacement.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Timer does not power on. | No power to the switch box; incorrect wiring; neutral wire not connected. | Check circuit breaker. Verify wiring connections (Line, Load, Neutral, Ground). Ensure neutral wire is connected. |
| Connected device does not turn ON/OFF as scheduled. | Incorrect current time setting; program not activated; device malfunction. | Verify current time is set correctly. Ensure the desired program (Evening, Morning, All Night, Countdown) is active (blue LED). Test the connected device manually. |
| Pantaila hutsik dago edo keinuka ari da. | Low power; internal issue. | Ensure stable power supply. If problem persists, turn off power at the breaker for 5 minutes, then restore. If still unresolved, contact customer support. |
| Botoiek ez dute erantzuten. | Software akats aldi baterakoa; kalte fisikoa. | Turn off power at the breaker for 5 minutes, then restore. If still unresponsive, contact customer support. |
Zehaztapenak
- Eredua: 25055
- Balorazio elektrikoa: 120 VAC, 60 Hz
- Gehienezko karga: 15A General/Resistive, 1200W Tungsten, 1200VA Ballast, ½ HP
- Produktuaren neurriak: 2" L x 4.5" W x 6" H
- Timer Module Dimensions: Approximately 1.75" (4.45cm) width x 4.25" (10.8cm) height
- Materiala: Plastikoa
- Kolorea: White (with interchangeable Light Almond option)
- Ziurtagiriak: UL zerrendatua
- Hari neutroa: Beharrezkoa
- Ordezko Bateria: NiMH (internal)
Figure 4: Timer Module Dimensions. This image provides the physical measurements of the timer module for installation reference.
Bermea eta Laguntza
Bermeari buruzko informazioa edo laguntza teknikoa lortzeko, jo fabrikatzailearen webgune ofizialera. webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Gorde erosketa-agiria berme-erreklamazioetarako.
