Intermatic ST01 24-Hour In-Wall Timer Instruction Manual

1. Sarrera

This manual provides detailed instructions for the installation, setup, operation, and maintenance of the Intermatic ST01 24-Hour In-Wall Timer. The ST01 is a heavy-duty digital timer designed for in-wall flush mounting, suitable for controlling various electrical loads including incandescent and fluorescent lighting. Please read this manual thoroughly before installation and use to ensure safe and proper operation.

1. irudia: Aurrealdea view of the Intermatic ST01 24-Hour In-Wall Timer. This image displays the timer's digital LCD screen and control buttons, designed for flush mounting within a standard wall box.

2. Segurtasun informazioa

WARNING: Risk of Electric Shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. Installation should be performed by a qualified electrician or trained personnel.

• Ez instalatu esku bustiekin.
• Do not use in locations where it may be exposed to water or extreme humidity.
• Ziurtatu kableatu-konexio guztiak ondo daudela eta tokiko araudi elektrikoak betetzen dituztela.
• This device is rated for 120-277V, 15A, 1800W. Do not exceed these ratings.
• Barruko erabilerarako soilik.

3. Paketearen edukia

Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:

• Intermatic ST01 24-Hour In-Wall Timer (1 unit)
• Muntatzeko torlojuak (2 unitate)
• Alanbrezko azkoinak (3 unitate)
• Argibide eskuliburua (dokumentu hau)

4. Instalazioa

Jarraitu urrats hauek instalazio seguru eta egokia izateko:

1. Itzali energia: Locate the circuit breaker or fuse that supplies power to the switch box where the timer will be installed. Turn off the power completely. Verify power is off using a voltage probatzailea.
2. Kendu lehendik dagoen etengailua: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal (typically Line, Load, and Ground).
3. Wire the Timer: The ST01 timer typically has three wires:
   • Black (Line): Connect to the incoming hot wire from the circuit breaker.
   • Red (Load): Connect to the wire going to the light fixture or appliance.
   • Berdea (lurra): Connect to the bare copper or green ground wire in the wall box.
   Use wire nuts to secure all connections. Ensure connections are tight and no bare wire is exposed.
4. Muntatu tenporizadorea: Gently fold the wires into the wall box. Insert the timer into the wall box and secure it with the provided mounting screws.
5. Instalatu horma-plaka: Attach a standard wall plate (not included) over the timer.
6. Berrezarri boterea: Piztu berriro korrontea etengailu elektrikoan edo fusible-kutxan.

Note: The ST01 is designed for flush mounting and requires a standard electrical wall box.

5. Hasierako konfigurazioa eta programazioa

Lehenengo aldiz piztean edo energia itzaltzearen ondorentage, the timer's internal CR2 lithium battery maintains settings, but you may need to set the current time and program schedules.

1. Ezarri uneko ordua:
   • Sakatu ERLOIA botoia.
   • Erabili ORDUA eta MINUTUA buttons to adjust the current time. The display operates in a 12-hour format (AM/PM).
   • Sakatu ERLOIA berriro gorde eta irteteko.
2. Program ON/OFF Schedules: The ST01 allows for multiple ON/OFF programs over a 24-hour period.
   • Sakatu PROG botoia. Pantailak "1 ON" erakutsiko du.
   • Erabili ORDUA eta MINUTUA buttons to set the desired ON time for program 1.
   • Sakatu PROG berriro. Pantailak "1 OFF" erakutsiko du.
   • Erabili ORDUA eta MINUTUA buttons to set the desired OFF time for program 1.
   • Repeat for additional programs (e.g., "2 ON", "2 OFF", etc.) as needed.
   • Sakatu ERLOIA to save all programs and return to normal operation.

Refer to the timer's LCD display for visual cues during programming.

6. Operating the Timer

Once programmed, the ST01 timer will automatically switch connected devices ON and OFF according to your set schedules. You can also manually override the timer:

• Eskuzko ON/OFF: Sakatu ESKULIBURUA button to cycle through ON, OFF, and AUTO modes.
  • ON: The connected device will remain ON, overriding all programs.
  • DESaktibatuta: The connected device will remain OFF, overriding all programs.
  • AUTOA: The timer will operate according to the programmed schedules. This is the default operating mode.
• Random Mode (if available): Some models may include a random mode for security. Consult the specific model's features if this is desired.

7. Mantentzea

The Intermatic ST01 timer requires minimal maintenance:

• Garbiketa: Wipe the timer's surface with a soft, damp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Bateria: The internal CR2 lithium battery maintains time and program settings during power outages. This battery is typically long-lasting and not user-replaceable. If the display becomes dim or settings are lost frequently, professional servicing may be required.
• Ikuskapena: Periodically inspect the timer and wall plate for any signs of damage or loose connections.

8. Arazoak

9. Zehaztapenak

• Eredua: ST01
• Mota: 24-Hour In-Wall Digital Timer
• liburukiatage: 120 - 277 V
• Amparoa: 15 A
• Potentzia: 1800 W
• Poloak: 1
• Eragiketa: ON/OFF, Digital, LCD Display
• Ordu ezarpena: 12 orduko formatua
• Bateria: CR2 Lithium (for memory backup)
• Funtzionamendu-tenperatura: 32 °F eta 104 °F (0 °C eta 40 °C)
• Muntaketa: Arrakada muntatzea
• Neurriak (Orokorrean): 2.75" H x 1.75" W x 1.46" D (70mm H x 44mm W x 37mm D)
• Kolorea: Zuria
• Materiala: Metala
• Ziurtagiriak: CSA ziurtagiria
• Bateragarritasuna: Incandescent, Fluorescent lighting
• Elementuaren pisua: 8 ontza (227 gramo inguru)

10. Bermea eta Laguntza

For warranty information and technical support, please contact Intermatic customer service. Keep your purchase receipt as proof of purchase.

Intermatic Bezeroarentzako Arreta:

• Webgunea: www.intermatic.com
• Refer to the official Intermatic webwebgunea, kontaktu-informazio eta bermearen xehetasun eguneratuenak lortzeko.