BeamZ DMX60 6-Channel DMX Controller Instruction Manual

1. Sarrera

The BeamZ DMX60 is a compact and versatile 6-channel DMX controller designed for managing various lighting effects. It features six individual faders for precise control over DMX channels and a master fader for overall intensity adjustment. This controller is ideal for decorative lighting, spot lighting, and creating specific atmospheres for events. Its lightweight design and optional battery operation make it suitable for portable use.

2. Segurtasun informazioa

• Irakurri arretaz argibide guztiak gailua erabili aurretik.
• Gorde eskuliburu hau etorkizunean erreferentzia izateko.
• Ez jarri gailua euripean edo hezetasunean, suteak edo deskarga elektrikoak saihesteko.
• Ziurtatu elikadura iturria bolumenarekin bat datorrelataggailuan zehaztutako eskakizunak.
• Ez ireki c-a.asing. Ez dago erabiltzaileak konpondu beharreko piezarik barruan. Konponketa guztiak zerbitzu-langile kualifikatuei eskatu.
• Saihestu gailua bero-iturrietatik gertu edo eguzki-argia zuzenean jartzen.
• Erabili fabrikatzaileak zehaztutako osagarriak soilik.
• Disconnect the device from the power supply before cleaning or when not in use for extended periods.

3. Produktua amaitu daview

The BeamZ DMX60 controller provides intuitive control over DMX-compatible lighting fixtures. Below are the key components and their functions.

Aurrealdeko panela

3.1. irudia: Aurrealdea view of the BeamZ DMX60 DMX controller. This image displays the top surface of the controller, featuring six individual channel faders labeled 1 through 6, and a master fader on the right. Each fader has a scale from 0 to 10. A red 'POWER' indicator LED is visible above the faders. The device name 'DMX60' and 'Z beamZ 6 CHANNEL DMX CONTROLLER' are printed on the surface.

• Channel Faders (1-6): Control the DMX value (intensity, color, etc.) for individual channels from 0 to 255 (represented as 0-10 on the fader scale).
• Fader maisua: Controls the overall output intensity of all active DMX channels simultaneously.
• Power LED: Indicates when the unit is powered on.

Atzeko panela

3.2. irudia: Atzekoa view of the BeamZ DMX60 DMX controller. This image shows the back panel of the device, which includes the DMX OUT XLR connector, a diagram for DMX pin configuration (Pin 1: GND, Pin 2: -, Pin 3: +), an ON/OFF rocker switch, and a 9/12 VDC power input jack with specifications (min. 100 mA).

• DMX OUT (XLR): 3-pin XLR connector for connecting to DMX-compatible lighting fixtures.
• ON / OFF etengailua: Unitatea pizten edo itzaltzen du.
• 9/12 VDC Power Input: Jack for connecting the external power adapter (minimum 100 mA).
• Bateriaren konpartimendua: Located on the underside (not visible in image) for optional 9V battery operation.

4. Konfigurazioa

Follow these steps to set up your BeamZ DMX60 controller:

1. Potentzia-konexioa:
   • Connect a compatible 9V or 12V DC power adapter (minimum 100 mA) to the power input jack on the rear panel.
   • Alternatively, for portable use, install a 9V battery into the battery compartment on the underside of the unit. Ensure correct polarity.
2. DMX konexioa:
   • Connect a 3-pin DMX cable from the DMX OUT XLR connector on the rear panel of the DMX60 to the DMX IN port of your first DMX lighting fixture.
   • For multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on.
   • Ensure all DMX fixtures are set to their correct DMX starting addresses and channel modes according to their respective manuals.
3. Piztu: Jarri atzeko paneleko ON/OFF etengailua 'ON' posiziora. Aurreko paneleko pizteko LEDa piztu beharko litzateke.

5. Funtzionamendua

The BeamZ DMX60 provides direct control over 6 DMX channels.

1. Banakako kanalaren kontrola:
   • Each of the six faders (1-6) corresponds to a DMX channel.
   • Move a channel fader up or down to adjust the DMX value for that specific channel. The fader scale (0-10) represents the full DMX range (0-255).
   • Adibidezample, if your lighting fixture uses DMX channel 1 for intensity, moving fader 1 will adjust its brightness.
2. Kontrol maisua:
   • The Master fader controls the overall output level of all active DMX channels.
   • To dim all lights simultaneously, lower the Master fader. To increase overall brightness, raise it.
   • The Master fader acts as a global dimmer, allowing you to set the maximum output for all channels controlled by the individual faders.

6. Mantentzea

Proper maintenance ensures the longevity and reliable operation of your DMX60 controller.

• Garbiketa: Use a soft, dry cloth to clean the exterior of the unit. Do not use abrasive cleaners, solvents, or harsh chemicals.
• Biltegiratzea: When not in use, store the controller in a dry, dust-free environment. If using battery power, remove the battery during long periods of storage to prevent leakage.
• Ikuskapena: Periodically check cables and connectors for any signs of wear or damage. Replace damaged cables immediately.

7. Arazoak

If you encounter issues with your BeamZ DMX60, refer to the following common problems and solutions:

If the problem persists after trying these solutions, contact customer support or a qualified technician.

8. Zehaztapenak

9. Bermea eta Laguntza

For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase. Keep your proof of purchase for any warranty claims.

For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact your BeamZ dealer or the official BeamZ support channels. Contact information can typically be found on the manufacturer's webgunea edo zure erosketa-dokumentazioa.