Cooper Lighting EUR70R LED Edge-Lit Exit Sign Instruction Manual

1. Produktua amaitu daview

The Cooper Lighting Sure-Lites® EU Series EUR70R is a self-powered, LED edge-lit exit sign designed for recessed mounting. It features a red 'EXIT' legend and operates on 120/277 Volts AC. This unit provides reliable emergency illumination for egress pathways.

Ezaugarri nagusiak hauek dira:

• Self-powered operation with an internal sealed lead calcium battery.
• Energy-efficient LED illumination.
• Anodized aluminum construction for durability.
• Recessed mounting for a clean aesthetic.
• Solid state, voltage limited charger.
• Volumen baxuatage disconnect to protect the battery.

2. Segurtasun informazioa

WARNING: Risk of electric shock. Disconnect power before installation or servicing.

• All electrical connections must be made in accordance with local codes, ordinances, and the National Electric Code (NEC).
• Instalazioa langile kualifikatuek egin behar dute.
• Ziurtatu hornidura boltage is compatible with the fixture (120/277V AC).
• Ez jarri gas edo elektrizitateko berogailuetatik gertu.
• Do not allow power supply cords to be pinched or damaged.
• The battery is an integral component and is not user-replaceable.

3. Paketearen edukia

Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:

• EUR70R LED Edge-Lit Exit Sign unit
• Die-cast canopy (for mounting)
• Installation hardware (screws, wire nuts, etc. - may vary)
• Argibide orria (dokumentu hau)

4. Instalazioa (Konfigurazioa)

This exit sign is designed for recessed mounting. Follow these steps for proper installation:

1. Prestatu muntaketa kokalekua: Ensure the ceiling or wall opening is appropriately sized for recessed installation. The product dimensions are approximately 14.25 inches (L) x 12.88 inches (W) x 0.4 inches (D). Ensure there is sufficient depth and clearance for the fixture and wiring.
2. Deskonektatu energia: Turn off the electrical power at the circuit breaker or fuse box before proceeding.
3. Kableatu konexioak:
   • Connect the building's AC supply wires to the corresponding wires on the exit sign.
   • The unit is designed for 120V or 277V AC input. Connect the appropriate voltage wires as per the wiring diagram provided with the unit (refer to specific wiring labels on the fixture).
   • Ensure all connections are secure using approved wire connectors.
   • Konektatu lurreko kablea.
4. Gailua muntatzea:
   • Carefully insert the exit sign into the prepared recessed opening.
   • Secure the fixture using the provided mounting hardware and die-cast canopy, ensuring it is flush and stable.
5. Initial Power-Up and Battery Charge:
   • Restore AC power to the circuit.
   • The unit's internal battery will begin charging. Allow at least 24 hours for the battery to achieve a full charge before conducting any discharge tests.
   • Observe the charging indicator light (if present) to confirm proper operation.

Figure 1: Cooper Lighting EUR70R LED Edge-Lit Exit Sign. This image shows the front view of the exit sign with the red 'EXIT' legend, indicating its sleek, recessed design.

5. Funtzionamendua

The EUR70R exit sign operates automatically:

• AC Power Present: When normal AC power is supplied, the LED 'EXIT' legend will be illuminated, and the internal battery will be charged and maintained by the solid-state charger.
• AC Power Failure: In the event of an AC power interruption, the unit will automatically switch to battery power, illuminating the 'EXIT' legend for a minimum duration as required by safety codes. The low-voltage disconnect feature prevents deep discharge of the battery.
• AC Power Restored: When AC power is restored, the unit will automatically switch back to AC operation, and the battery will begin recharging.

6. Mantentzea

Regular maintenance ensures the reliable operation of your exit sign.

• Hileroko proba: Press and hold the test button (if present) for 30 seconds. The 'EXIT' legend should remain illuminated. Release the button; the legend should return to normal operation.
• Annual Test: Disconnect AC power to the unit for 90 minutes. The 'EXIT' legend should remain illuminated for the entire duration. Reconnect AC power after the test.
• Garbiketa: Clean the sign's surface with a soft, damp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Bateria ordezkatzea: The sealed lead calcium battery has a typical lifespan. If the unit fails to meet the required emergency illumination duration during testing, the battery may need replacement. This should be performed by qualified service personnel.

7. Arazoak

8. Zehaztapenak

• Eredua: EUR70R
• Marka: Cooper Lighting Sure-Lites®
• Sarrera boltage: 120/277 Volt korronte alternoa
• Power Rating (AC): 3.6 Watts (120V), 4.5 Watts (277V)
• Argi iturria: LED
• Legend Color: Red 'EXIT'
• Muntatze mota: Atxikituta
• Eraikuntza-materiala: Aluminio anodizatua
• Neurriak: 14.25 hazbete (L) x 12.88 hazbete (W) x 0.4 hazbete (D)
• Pisua: 2 kilo inguru
• Bateria mota: Sealed Lead Calcium (internal, non-user replaceable)
• ASIN: B018HR72YY
• UPC: 993520725594

9. Bermea eta Laguntza

For warranty information or technical support, please contact Cooper Lighting customer service. Retain your proof of purchase for warranty claims. Specific warranty terms and conditions may vary and are typically provided at the time of purchase or on the manufacturer's official webgunea.

Fabrikatzailea: Cooper Argiztapena