1. Sarrera
Eskerrik asko erosketagatik.asing the HIOKI 3169 Clamp Power Meter. This instrument is designed for precise measurement of electrical parameters in various power systems. It allows for simultaneous measurement of demand and harmonics across multiple circuits, providing comprehensive data for analysis and monitoring.
This manual provides essential information for the safe and effective use of your HIOKI 3169. Please read it thoroughly before operation and keep it for future reference.
2. Segurtasun informazioa
Always observe the safety precautions described in this manual to ensure safe operation and to prevent damage to the instrument or injury to personnel. Pay special attention to warnings and cautions.
- Do not attempt to measure current or power with the 3169 main unit alone. External clamp-on sensors are required.
- Ziurtatu elikadura hornidura boltage is within the specified range (AC 100V to 240V).
- Do not operate the instrument in wet environments or where explosive gases are present.
- Refer to the separate instruction manuals for any optional accessories used with this device.
3. Konfigurazioa
3.1 Unpacking and Checking Accessories
Carefully unpack the instrument and verify that all accessories listed below are present and undamaged:
- liburukiatage cord L9438-53 ×1 (Black, Red, Yellow, Blue)
- Argindar kablea × 1
- Grounding adapter ×1
- Argibide eskuliburua ×1
- Quick start manual ×1
- CD-R ×1 (RS-232C instruction)
- Input cord label ×1
Oharra: The HIOKI 3169 main unit does not include clamp-on sensors for current and power measurement. These must be purchased separately according to your specific measurement requirements. A PC card is also required for data collection and automatic saving of measurement data.
3.2 Connecting Power and Sensors
Connect the provided power cord to the instrument and a suitable AC power outlet (100V to 240V, 50/60Hz). Connect the voltage cords to the appropriate terminals on the device and the circuit to be measured. Attach the optional clamp-on sensors to the current measurement points and connect them to the instrument.
Figure 1: HIOKI 3169 Clamp Power Meter connected with optional clamp-on sensors and voltage leads, ready for measurement. The main unit is shown with its display and control buttons, alongside the yellow clamp sensors and colored voltage kableak.
4. Funtzionamendu-argibideak
4.1 Oinarrizko funtzionamendua
Once powered on and sensors are connected, the HIOKI 3169 will display measurement data on its screen. The display updates approximately 2 times per second, providing near real-time readings.
2. irudia: hurbileko planoa view of the HIOKI 3169 Clamp Power Meter's display, showing various electrical parameters such as voltage, current, power, and frequency. The interface includes function buttons and navigation controls.
4.2 Measurement Items and Ranges
The instrument can measure the following items:
- liburukiatage (AC 150.00 to 600.00 V, 3 ranges)
- Current (AC 500.00 mA to 5.0000 kA, range varies by sensor)
- Active Power, Reactive Power, Apparent Power
- Energia Aktiboa, Energia Erreaktiboa
- Potentzia-faktorea
- Maiztasuna
- Harmonics (up to 40th order)
The power range (75.000 W to 900.00 kW) is determined by the combination of the selected voltage/current range and measurement line configuration.
4.3 Recording and Data Storage
Measurement data can be automatically saved to a PC card. The recording interval can be set as follows:
- Estandarra: 1 to 30 seconds, 1 to 60 minutes (13 settings)
- Epe laburrean: 1 cycle / 0.1 / 0.2 / 0.5 seconds (for instantaneous values only)
4.4 Funtzioak
The HIOKI 3169 includes several useful functions:
- Wiring Error Check: Helps identify incorrect wiring configurations.
- Display Language Switching: Allows changing the display language.
- Pantaila eusteko funtzioa: Freezes the current display readings.
- Babeskopia funtzioa: Preserves settings and data in case of power loss.
- Potentzia Outage Processing: Manages data integrity during unexpected power interruptions.
- Teklak blokeatzeko funtzioa: Ezarpenetan ustekabeko aldaketak saihesten ditu.
- D/A Output (-01 specification): Provides 4-channel analog output of measurement items (DC ±5V f.s.).
5. Mantentzea
To ensure the longevity and accuracy of your HIOKI 3169, follow these maintenance guidelines:
- Garbiketa: Wipe the instrument with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Biltegiratzea: Store the instrument in a clean, dry environment, away from direct sunlight, extreme temperatures, and high humidity.
- Kalibrazioa: Neurketaren zehaztasuna mantentzeko, langile kualifikatuek aldizka kalibratzea gomendatzen da.
6. Arazoak
If you encounter issues with your HIOKI 3169, refer to the following common troubleshooting steps:
- Potentziarik gabe: Check the power cord connection and the power outlet. Ensure the power supply voltage zuzena da.
- Irakurketa okerrak: Egiaztatu clamp-on sensors are correctly attached and the voltage leads are properly connected. Check the measurement range settings.
- Data Not Saving: Ensure a compatible PC card is inserted correctly and has sufficient free space.
For persistent issues or complex problems, please contact HIOKI customer support or your local distributor for assistance.
7. Zehaztapenak
| Parametroa | Deskribapena |
|---|---|
| Eredua | 3169 |
| Measurement Lines | Single-phase 2-wire (4 circuits), Single-phase 3-wire (2 circuits), Three-phase 3-wire (2 or 1 circuit), Three-phase 4-wire (1 circuit) *50/60Hz, by same voltagsistema |
| Neurketa-elementuak | liburukiatage, Current, Active/Reactive/Apparent Power, Active/Reactive Energy, Power Factor, Frequency, Harmonics (up to 40th order) |
| liburukiatage Barrutia | AC 150.00 to 600.00 V, 3 ranges |
| Uneko barrutia | AC 500.00 mA to 5.0000 kA (Measurement range varies depending on the sensor used) |
| Potentzia-barrutia | 75.000 W to 900.00 kW (Determined by combination of voltage/current range and measurement line) |
| Basic Accuracy (Voltage) | ±% 0.2 erreg. ±% 0.1 fs |
| Basic Accuracy (Current) | ±0.2% rdg. ±0.1% f.s. + Current sensor accuracy |
| Basic Accuracy (Active Power) | ±0.2% rdg. ±0.1% f.s. + Current sensor accuracy (Power factor=1) |
| Neurketa-metodoa | S digitalaampling method, PLL synchronization or 50/60Hz fixed clock |
| Bistaratu eguneratze-tasa | Approx. 2 times/s (Excluding PC card access, RS-232C communication) |
| Grabaketa tartea | Standard: 1 to 30 seconds, 1 to 60 minutes (13 settings); Short-term: 1 cycle/0.1/0.2/0.5 seconds (Instantaneous values only) |
| Maiztasun Ezaugarriak | For fundamental wave frequency 45Hz to 66Hz, up to 50th harmonic of fundamental wave ±3% f.s. + [Measurement accuracy] |
| Elikatze Hornidura | AC 100V to 240V, 50/60Hz, 30VA max. |
| Neurriak | 210 W × 160 H × 60 D mm |
| Meza | 1.2 kg |
| Accuracy Guaranteed Period | 1 year (1 year after adjustment) |
8. Bermea eta Laguntza
HIOKI 3169 Clamp Power Meter comes with an accuracy guaranteed period of 1 year from the date of purchase (or 1 year after adjustment). For warranty claims, technical support, or service, please contact your authorized HIOKI distributor or visit the official HIOKI webharremanetarako informazioa lortzeko gunea.
Gorde erosketa-agiria erosketaren frogagiri gisa, bermearen ondorioetarako.
