OSRAM SYLVANIA OCTRON 800 ECOLOGIC LINEAR FLUORESCENT LAMP

Sarrera

This manual provides essential information for the safe and effective installation, operation, and maintenance of your OSRAM SYLVANIA OCTRON 800 ECOLOGIC Linear Fluorescent Lamp, Model 22136. This T8 lamp is designed for general illumination applications, offering neutral white light with a color temperature of 3500K and a high Color Rendering Index (CRI) of 82. Please read this manual thoroughly before installation and retain it for future reference.

Image: OSRAM SYLVANIA OCTRON 800 ECOLOGIC Linear Fluorescent Lamp, Model 22136. This image displays the linear fluorescent tube, typically used in commercial or industrial lighting fixtures.

Segurtasun Informazioa

Beti jarraitu segurtasun neurri hauek lesioak edo kalteak saihesteko:

• Deskonektatu energia: Before installing, replacing, or cleaning the lamp, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
• Kontuz maneiatu: Fluoreszentea lamps are made of glass and can break. Handle them carefully to avoid injury from broken glass or exposure to internal components.
• Ezabaketa egokia: Fluoreszentea lampmerkurio kantitate txikiak dituzte. Bota ezazu lamps according to local, state, and federal regulations. Do not dispose of in regular household trash.
• Bateragarritasuna: Ziurtatu lamp is compatible with your fixture's ballast and socket type (Medium Bi-pin). Using an incompatible lamp kalteak eragin ditzake l-riamp or fixture, or create a fire hazard.
• Do Not Dim: Hau lamp is not designed for use with dimmers unless explicitly stated on the lamp or packaging.
• Funtzionamendu-tenperatura: Ensure the operating environment is within the specified temperature range for fluorescent lamps.

Konfigurazioa eta Instalazioa

Instalazio egokia lortzeko, jarraitu urrats hauek:

1. Itzali: Itzali argiztapen-gailuaren korrontea etengailu nagusitik.
2. Kendu L zaharraamp (hala badagokio): Carefully twist the old fluorescent lamp 90 degrees and gently pull it out of the fixture's sockets.
3. Ikuskatu finkapena: Check the fixture's sockets and wiring for any signs of damage or wear. Replace any damaged components before proceeding.
4. Txertatu L berriaamp: Align the bi-pin ends of the OSRAM SYLVANIA 22136 lamp with the slots in the fixture's sockets. Gently push the lamp into the sockets until the pins are fully seated, then twist the lamp 90 degrees to lock it into place. Ensure the lamp is securely seated and makes good electrical contact.
5. Berrezarri boterea: Behin lamp is securely installed, restore power to the fixture at the circuit breaker.
6. Proba: Piztu argiaren etengailua behar bezala funtzionatzen duela egiaztatzeko.

Funtzionamendu-argibideak

The OSRAM SYLVANIA 22136 fluorescent lamp operates in conjunction with a compatible fluorescent ballast within your lighting fixture. Once installed, operation is straightforward:

• Piztu/Itzali: Use the wall switch or fixture control to turn the lamp piztu edo itzali.
• Beroketa-denbora: Fluoreszentea lamps may require a brief warm-up period to reach full brightness, especially in colder environments.
• Funtzionamendu normala: Lamp will provide consistent, neutral white light during its operational lifespan.

Mantentzea

Minimal maintenance is required for the OSRAM SYLVANIA 22136 lamp errendimendu eta iraupen optimoa bermatzeko.

• Garbiketa: Aldian-aldian, argindarra itzalita eta l-rekinamp cooled, gently wipe the lamp Garbitu gainazala zapi leun, lehor eta lihorik gabeko batekin hautsa eta hondakinak kentzeko. Ez erabili garbitzaile likidorik zuzenean gainazalean.amp.
• Lamp Ordezkoa: Ordeztu lamp when it reaches the end of its rated life (indicated by flickering, dimming, or failure to ignite) or if it becomes damaged. Always replace with a lamp of the same type and wattage to ensure compatibility and proper operation. Refer to the 'Setup and Installation' section for replacement procedures.
• Aparatuaren ikuskapena: Regularly inspect the lighting fixture for any signs of wear, corrosion, or loose connections. Address any issues promptly.

Arazoak konpontzea

Zure l badaamp is not functioning correctly, try the following troubleshooting steps:

If problems persist after attempting these solutions, consult a qualified electrician or contact OSRAM SYLVANIA customer support.

Zehaztapenak

Key technical specifications for the OSRAM SYLVANIA OCTRON 800 ECOLOGIC Linear Fluorescent Lamp, Model 22136:

• Modelo zenbakia: 22136
• Lamp Mota: T8 Linear Fluorescent
• Wattage: 17 Watt
• Oinarri mota: Medium Bi-pin
• Kolore Tenperatura: 3500 Kelvin (Zuri Neutroa)
• Koloreen errendatze indizea (CRI): 82
• Hasierako lumenak: 1,350
• Batez besteko orduak: 30,000 ordu
• Diametroa: 1.098 hazbetekoa
• Luzera: 24 inches (approximate, depending on measurement method)
• Produktuaren neurriak: 7.75 x 6.13 x 25 inches (packaging/case dimensions)
• Elementuaren pisua: 6.59 pounds (for a case of lamps)
• Ecologic Feature: Designed for environmental responsibility.

Bermea eta Laguntza

For information regarding the product warranty, please refer to the documentation provided with your purchase or visit the official OSRAM SYLVANIA website. For technical support or further assistance, please contact OSRAM SYLVANIA customer service through their official channels.