Sarrera
This manual provides detailed instructions for the installation, operation, and maintenance of your Cooper Lighting SDC15-W Skye Fan/Light Control. Please read all instructions carefully before beginning installation or use to ensure proper function and safety.
Segurtasun Informazioa
OHARRA: To avoid fire, shock, or death; turn off power at circuit breaker or fuse box and test that the power is off before wiring. This device is intended for installation in accordance with the National Electric Code and local regulations. It is recommended that a qualified electrician perform this installation.
KONTUZ: For indoor use only. Do not exceed the maximum wattage edo amperage ratings. This device is designed for incandescent light fixtures up to 300W and ceiling fans up to 1.5A. Not for use with fluorescent lights, LED lights, or exhaust fans.
Konfigurazioa eta Instalazioa
Before installation, ensure the power to the circuit is turned off at the circuit breaker. This control is designed for single-gang wall box installation and supports 3-way circuit configurations.
Kableatzeko jarraibideak
- Identify the Line (hot), Load (to fan/light), and Ground wires from your wall box.
- Connect the green ground wire from the SDC15 to the bare copper or green ground wire in the wall box.
- Connect the black wire labeled 'BK' (Common/Line) from the SDC15 to the incoming Line (hot) wire.
- Connect the yellow wire labeled 'YL Light' from the SDC15 to the wire leading to your light fixture.
- Connect the yellow wire labeled 'YL Fan' from the SDC15 to the wire leading to your ceiling fan.
- Secure all wire connections with appropriate wire nuts.
Irudia: Atzealdea view of the SDC15-W control, illustrating the screw terminals for wiring connections. Labels for 'YL Light', 'BK', 'YL Fan', and 'GND' are visible, indicating connections for light, common/line, fan, and ground respectively. This view is crucial for correct electrical installation.
Irudia: Alboko profesionalafile of the SDC15-W control, showing its depth and mounting bracket. This view helps in understanding the physical dimensions for fitting into a standard wall box.
Muntaketa
- Carefully push the wired control into the wall box.
- Lotu kontrola hormako kaxari emandako muntaketa-torlojuak erabiliz.
- Attach the wall plate (not included) over the control.
- Berrezarri energia etengailuan.
Funtzionamendu-argibideak
The SDC15-W features two independent slider controls: one for the ceiling fan speed and one for the light dimmer.
Irudia: Aurrealdea view of the SDC15-W Fan/Light Control, showcasing the two vertical slider controls. The left slider has a fan icon, and the right slider has a light bulb icon, with an 'OFF' position clearly marked between them. This is the primary user interface for controlling fan speed and light intensity.
Fan Abiadura Kontrola
- To turn the fan ON, slide the left control lever upwards from the 'OFF' position.
- Slide the lever further upwards to increase fan speed.
- Slide the lever downwards to decrease fan speed.
- To turn the fan OFF, slide the lever all the way down to the 'OFF' position.
Argiaren dimmer kontrola
- To turn the light ON, slide the right control lever upwards from the 'OFF' position.
- Slide the lever further upwards to increase light brightness.
- Slide the lever downwards to decrease light brightness.
- To turn the light OFF, slide the lever all the way down to the 'OFF' position.
Mantentzea
The SDC15-W Fan/Light Control requires minimal maintenance. Ensure the power is off before cleaning.
- Clean the surface of the control with a soft, damp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
- Periodically check the mounting screws for tightness.
- No user-serviceable parts inside. Do not attempt to disassemble the unit.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Fan/Light does not turn ON. | No power to the control; Incorrect wiring; Blown fuse/tripped breaker. | Check circuit breaker/fuse. Verify wiring connections. Ensure power is restored. |
| Fan speed or light brightness does not change. | Incorrect wiring; Incompatible fan/light type; Control is faulty. | Verify wiring. Ensure fan/light is compatible (incandescent for light, standard ceiling fan for fan). Replace control if necessary. |
| Fan hums or wobbles. | Fan motor incompatibility; Fan balance issue. | Ensure fan is compatible with solid-state speed controls. Check fan blade balance. |
| Argia keinuka edo burrunba egiten du. | Incompatible bulb type; Loose bulb; Overloaded circuit. | Ensure incandescent bulbs are used. Tighten bulb. Reduce total wattage if exceeding 300W. |
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Modelo zenbakia | SDC15 |
| Eragiketa modua | Eskuliburua |
| Uneko balorazioa (haizagailua) | 1.5 Amps |
| Wattage (Argia) | 300 Watts (Incandescent Max) |
| Bolumen eragileatage | 120 Volt |
| Maiztasuna | 60 Hz |
| Zirkuitu Mota | norabide bakarrekoa |
| Kontaktu mota | Normalean irekita |
| Konektore mota | Torlojua |
| Eragile mota | Push Button (Slider) |
| Kontrol-metodoa | Touch (Slider) |
| Kolorea | Zuria |
| Neurriak (L x W x H) | 4.25 x 1.75 x 2 hazbete |
| Elementuaren pisua | 4.8 ontza |
| Nazioarteko Babesteko Balorazioa | IP44 |
| Fabrikatzailea | Cooper Industries |
Bermearen informazioa
Warranty information for the Cooper Lighting SDC15-W Fan/Light Control is typically provided with your purchase or can be obtained directly from the manufacturer. Please retain your proof of purchase for warranty claims.
Bezeroarentzako Arreta
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Cooper Lighting customer support. Refer to the packaging or the official Cooper Lighting webgunea kontaktu-informazio eguneratuena lortzeko.
